Pathway Connectivity 1108 User Manual
Job Name:
Catalog #:
SMALL eDIN SYSTEM ENCLOSURE WITH HORIZONTAL DIN RAIL
#1108
Date:
Notes:
PRODUCT OVERVIEW
The Pathway Connectivity 1108 eDIN enclosure is an
ETL-Listed NEMA1 Enclosure for eDIN modules with a power
supply.
FEATURES
• Contractor friendly, sturdy steel construction
• Conduit knockouts provided on all sides
• Logical arrangement makes wiring neat and easy
• Barriered high-voltage section for power supplies
(power supply not included)
• Internal DIN rail can be used to mount eDIN and other
standard DIN rail modules
• Pre-installation service of eDIN modules and power supply
available; local contractor only lands main power and data
lines
• When eDIN Modules are factory-installed in a Pathway
enclosure, assembly is ETL Listed
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© 2017 Acuity Brands Lighting Canada Inc. All Rights Reserved Form #0317-01-1108
SPECIFICATIONS
WEIGHTS AND DIMENSIONS
• 8.5 lbs (3.9 kg)
• 10.25”W x 13.25”H (260mm x 355mm)
• Depth: 4.5” (120mm)
RAIL SPACE
• 2 x 9.5” (240mm) Horizontal
1 of 2
3.17
#1108 Small eDIN Enclosure
DIMENSIONS
CREATING THE CONFIGURABLE PART NUMBER
Choose the required eDIN System Enclosure. Begin the part number with 49XX where XX is the last two digits of the eDIN System
Enclosure part number. Follow this with the list of modules to be included in the enclosure. The first module will be designated with
"M". Then add the power supply. VIA5 Switches must be in a superior position. See the chart below.
The logic of the construction results in part numbers like, 49XX-MXX-XX-XX-PXX or 49XX-670X-MXX-PXX.
The 1108 small enclosure has two 9.5” of horizontal DIN rail space (240mm).
Choose up to two A-type modules or one only of either the B- or C-type modules
-Type Modules (4.5” long,115mm):
A
#1002 1-in, 4-out DMX Repeater
#1011 Pathport eDIN 1-port node
#1012 Pathport eDIN 2-port node
#1029 NFP+ Network Fade Processor
B-Type Modules (6.25” long, 160mm):
# 1004 16 channel DMX-to-Analog
# 1006 24 channel Analog-to-DMX
# 1009 1-in, 4-out DMX/RDM Splitter
C-Type Modules (8” long, 200mm):
#1003 12 channel Contact Closure
#1008 6 channel LED Dimmer
#1014 Pathport eDIN 4-port node
#6705/6706 VIA5 Ethernet Switches
Power Supplies:
1001-30 30 Watt, 24VDC Power Supply
700-7950 100 Watt, 48VDC Power Supply
1001-DC10 48VDC to 24VDC Converter, 10 Watts
1001-DC20 48VDC to 24VDC Converter, 20 Watts
Part Number
1105 4905 1011 M11
1106 4906 1012 M12
1107 4907 1014 M14
1108 4908 1016 M16
1109 4909 1029 M29
1002 M02 A 6705 6705
1003 M03 C 6706 6706
1004 M04 B 1001-30 P01
1006 M06 B 700-7950 P09
1008 M08 C 1001-DC10 P11
1008-6A M08.6 C 1001-DC20 P12
1009 M09 B
Configurable
Code
Size Code Part Number
ORDERING INFORMATION
PART # DESCRIPTION
1108 10" x 13" x 4.5" eDIN System Enclosure - Two 9” Horizontal DIN Rail
Configurable
Code
Size Code
A
A
C
C
A
C
C
#103 - 1439 17th Ave SE Calgary AB Canada T2G 1J9 Phone + 1 403 243 8110 orders@pathwayconnect.com www.pathwayconnect.com
© 2017 Acuity Brands Lighting Canada Inc. All Rights Reserved Form #0317-01-1108
2 of 2
3.17
Loading...