Pass and Seymour d b a Legrand SA7199 User Manual

Smart LED Light Strip Kit White and Color with HomeKit Technology

Installation Instructions

Keep your individual HomeKit Setup Code in a secure area. The code is unique to your device.

Catalog Number(s): HKT1

Item

Name

Description

Power Adaptor

24VDC, 1.5A supply – For indoor use only

Controller

Connects to the strip and power adaptor.

6-Pin Connector

Do not disconnect the strip from the controller.

Point of Extension

If desired, strip extensions (HKT2) can be added here.

Designated Locations for Cutting

The strip can be shortened by cutting along the pre-designated locations indicated by scissors.

Reset Button

Reset the device by using a paper clip to press the reset button for 10 seconds until the light strip quickly flashes red 3 times. The device will then restart.

Getting to Know Your Device

 This kit includes:

o 2m (6.5ft) self-adhesive light strip o Controller o Power adaptor (24V, 1.25A)

 The strip can be shortened by cutting at designated locations to a minimum length of 34cm (1.1ft).  The strip can be extended up to 10m (32.8ft) by adding extensions (HKT2). Each extension is 2m (6.5ft).

Smart LED Light Strip Kit White and Color with HomeKit Technology

Installation Instructions

Keep your individual HomeKit Setup Code in a secure area. The code is unique to your device.

Catalog Number(s): HKT1

800.223.4162

1.877.BY.LEGRAND

www.legrand.us www.legrand.ca

Installation and Setup

1. Ensure the LED strip is connected to the controller and the controller is connected to the power adaptor.

2. Plug the adaptor into a power outlet (for indoor use only!)

3. Connect your iPhone or iPad (iOS 11 or later) to a 2.4GHz Wi-Fi® network using your router utility software.

4. Download and open the free Apple Home app from the App Store.

5. Tap the “+” at the top right corner of the screen. Follow the in-app directions to complete your device setup. When asked to scan your HomeKit Setup Code, scan the QR code on your device. A copy of the QR code is also located on this sheet. If you’re having trouble scanning the code, you can manually enter the code found on the label.

6. Follow the in-app directions to assign a name to your device and add it to a room. You can set up customized scenes that control multiple devices with a single command.

7. To add more devices or repeat the setup process, tap “+” on the Home Page.

NOTE: Your product natively works with Siri after setup, but integration options are also available for your Alexa or Google Assistant. Reference the appropriate user guide for your voice assistant, by visiting one of the following sites:

http://legrand.us/radiant/homekit/siri http://legrand.us/radiant/homekit/alexa http://legrand.us/radiant/homekit/google

PERMISSION REQUIREMENTS

The use of a HomeKit-enabled accessory requires the following permissions:

 Settings > iCloud > iCloud Drive > Turn On  Settings > iCloud > Keychain > Turn On  Settings > Privacy > HomeKit > Legrand Home > Turn On

Regulatory Information FCC NOTICE

This device complies with Part 15 of the FCC Rules and Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the transmitter’s radiating structure(s) and the body of the user or nearby persons. This transmitter must not be co-located or operating in conjunction with any other antennae or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antennae or transmitter. NOTE: Any changes or modifications to this device that are not expressly approved by the manufacturer will void the warranty and the user’s authority to operate the equipment. FCC ID: YV8-SA7199

IC NOTICE

This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions: (1) this device may not cause interference; and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible d'en compromettre le fonctionnement.

RF EXPOSURE STATEMENT

This equipment meets the SAR evaluation limits given in RSS-102 Issue 5 requirements at the minimum separation distance of 20 cm to the human body. Note: Any changes or modifications to this device that are not expressly approved by the manufacturer, will void the warranty and the user’s authority to operate the equipment. IC ID: 9922A-SA7199 Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

WARRANTY

This product is warranted under normal use against defects in workmanship and materials for as long as you own it. If the product fails due to a manufacturing defect during normal use, return it for a replacement at the store where purchased or contact Technical Support at 1-800-223-4162, option 3. All replacement requests must include a dated sales receipt (legible copies are acceptable). SUPPORT IF YOU NEED HELP INSTALLING YOUR DEVICE, TALK TO OUR TECHNICAL SUPPORT TEAM: PHONE: 1-800-223-4162, option 3 8:00 a.m. to 5:00 p.m. EST (M-F) EMAIL: technical.support-hs@legrand.us