Paso Sound Products RDU216, MW163U, MW165U Installation Manual And Operating Instructions

Installation Manual
and Operating Instructions

Wireless Microphone System

Paso Sound Products, Inc.

Web site: http://www.pasosound.com E-mail: [e-mail]

4750 F Goer Drive - Charleston, South Carolina 29406 / TEL: [phone] FAX: [phone]

RDU216/ MW163U
RDU216/ MW165U

PROFESSIONAL AUDIO & SOUND

®

PROFESSIONAL AUDIO & SOUND

®

CAUTION !

TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE

Manual

OM 216

REV. 2.2

REPLACEMENT PARTS
Please provide complete information when you request
replacement parts from either the Factory or a Paso Authorized
Distributor. Be certain to include the Part Number and Description
as it appears on the parts list, the Model Number of the unit and if
possible the Serial Number and the date of purchase of the unit.
Replacement parts inventory is maintained specifically to repair
Paso products. Part sales for other reasons or applications will be
declined.

ORDERING FROM THE FACTORY
Print all information on a purchase order form and mail to:
PASO SOUND PRODUCTS, INC.
4750 Goer Drive - Building F
CHARLESTON, SC 29406

Be sure to include the following:

- Paso part number

- Part description

- Quantity required

- Model number of the unit

- Serial number of the unit

- Your payment or your authorization for COD shipment for parts
not covered by the Warranty or if your company has a current
account with the factory

RETAIN ORIGINAL PARTS (IN WARRANTY) UNTIL YOU
RECEIVE REPLACEMENTS. DEFECTIVE PARTS THAT
SHOULD BE RETURNED TO THE FACTORY WILL BE LISTED
ON YOUR PACKING SLIP.

For your convenience replacement parts are also available through
Paso Authorized Distributors and Dealers nation wide. Obtain a
location list directly from the Factory or your regional Paso
Representative.

TECHNICAL CONSULTATION

- Need help with your installation ?

- Need help with the operation of the unit ?

- Need help with a repair ?

Call or write for assistance. You will find our Technical Dept. eager
to help or assist you with any technical problem you may have
encountered except “`Customizing'' for a unique application.

The effectiveness of our consultation service depends on
the accuracy of the information you furnish.
Be sure to tell us:

- The Model and Serial number of the unit

- The date of purchase

- An exact description of the difficulty

- All trouble-shooting done in attempting to correct the problem

Call our toll-free phone number:

1-800 231 3034

REPAIR SERVICE
Repair service for out of warranty Paso products may be
obtained form your local Paso distributor or any other
qualified repair station.

In warranty repairs must be returned to the Factory.
Prior authorization must be obtained from the Factory.
Products received without authorization will be refused by
our Receiving Department.

IN WARRANTY REPAIR SERVICE
Call or write the Factory to obtain an authorization to
return
the product for repairs.

Pack the equipment in the original carton or in a strong
carton with at least THREE INCHES of resilient packing
material on all sides, top and bottom. Seal the carton with
reinforced tape and mark it FRAGILE on at least two
sides. Remember, the Carrier will not accept liability for
shipping damages if the unit is improperly packed.

EQUIPMENT RECEIVED IN DAMAGED CONDITION
DUE TO POOR PACKING WILL BE REFUSED AND
THE WARRANTY COVERAGE IS AUTOMATICALLY
VOIDED.

The Paso Sound Limited Warranty provides:

The examination of the returned product must disclose in
our judgement, a manufacturing defect. The warranty
does not extend to any product that has been subject to
misuse, neglect, accident, improper installation or where
the serial number of the product has been removed or
defaced.

Ship via insured prepaid United Parcel Service or Parcel
Post to:

PASO SOUND PRODUCTS, INC.
4750 Goer Drive - Building F
CHARLESTON, SC 29406
ATTN. SERVICE DEPARTMENT
The equipment will be returned freight prepaid after
repairs.

Be sure to include the following:

- Your name and address

- Date of purchase and copy of invoice

- A brief description of the difficulty

- A return address shipping label

­OUT OF WARRANTY REPAIR SERVICE
Follow return instructions as per in warranty repair
service. Prior to performing all necessary repairs, you will
be advised of the charges and at that time a written
authorization by you will be required including
authorization to return the equipment COD for the service
and shipping charges. This will avoid unnecessary delays
in returning the equipment to you.

CUSTOMER SERVICE

Manual

OM 216

REV. 2.2

Printed in USA 2004

No. Of Channel

Frequency Band

Receiver Type

Handheld Transmitter

Beltpack Transmitter

AC Adapter

Size

UHF

True Diversity

System classification

INTRODUCTION

You are the proud owner of a state-of-the-art PLL Synthesized 16 channel
frequency agile UHF high band professional wireless receiver/ transmitter
system. Our engineers have utilized esoteric communications principles and
techniques to design this high quality system that will give unequivocal
performance in all wireless systems applications.

The standard receiver/ transmitter combinations are as follows:
RDU216 / MW163U and RDU216/ MW165U

1

10

StandardSystemPackaging

Receiver RDU216
Transmitter MW165U or MW163U
Antenna ANT 750
ACAdaptor AC216
Phono Patch Cord 27/216
FrequencyAdjustDriver MRCSD
Operating manual OM 216

10-15V / 800mA

INSTALLATIONOFCABLE RESTRAINT

To prevent contact noise caused by constant tension applied to the connector, a cable
restraint is designed suchthat tension is totally reduced when itis properly used.( see Fig.7 )

When the audio cable goes through the cable restraint, it will prevent sweat from going
directly into the unitvia the connector.This is another advantage of the cable restraint.

Aerobics

Fig.7

Depending on customer requirements, Lavalier / Headset microphone or
instrument inputs can be connected to the transmitter via the audio input
connector.Useris freeto choose the various input sources but is advisedtotake
note that connector used must be compatible to each other. The pin
configurationsforthe miniXLR connectoris in Fig.8.

INSTALLATION OF LAVALIER / HEADSET
MICROPHONES OR INSTRUMENT INPUTS

ANTENNA

GT IN

LED INDICATOR

MT IN

GND

PHANTOM POWER

POWER
SWITCH

POWER

OFF ON

1

2

3

4

Fig.8

PROFESSIONAL AUDIO & SOUND

®

RDU216

16

MW165U
MW163U

½ 19”

Channel Selection and Gain Adjust

Channel selector and gain adjust are hidden in the designated cover in the front as
shown in picture.
To make channel selection and gain adjust, press the designated cover and flip
it open as shown.
Channel selection can be made by
rotating the selector with the frequency
adjust driver. Gain adjust for Lavalier
and Headset microphones can be done
by adjusting the MT switch, whereas
GT switch is for the gain adjust of
electric Guitar and other high impedance
line level inputs.

MT

Channel

GT

MW163U

Selector

PROFESSIONALAUDIO&SOUND

®

1PCS
1PCS
2PCS
1PCS
1PCS
1PCS
1COPY

MW163U

Optional Accessories

Headset microphone w

19” Rack mountwithdual antenna mountingplate. PRK216

Collar microphone forMW163U MC63

ith aerobic sweatguardfor MW163U MHS63

Aerobic waist pouchforMW163U WP163