UHF PLL Diversity Wireless Receiver
Wireless Microphone Systems
User Guide
1 2
PAW-1000 System
Frequency Band Selection
Congratulations! Welcome to the PAW-1000 wireless system. To users who need to build an
advanced UHF radio system, PAW-1000 provides an excellent solution. With 160 frequency bands,
PAW-1000 is applicable for various occasions of radio-cast such as live shows, broadcast, meetings,
instrument pickups etc. Touch buttons and liquid crystal displays are equipped within all the
components for fast and simple system setup.
Most countries closely regulate the radio frequencies used in the transmission of wireless
information. These regulations state which devises can use which frequencies, and help to limit the
amount of RF (radio frequency) interference in all wireless communications.
To be flexible enough to operate worldwide, PAW-1000 system offers a number of frequency
ranges. You can choose an appreciate one according to the wireless regulation in your
area.Available bands are:
UA: 518-548MHz
UB: 630-660z
UC: 740-770z
UD: 800-822z
UE: 838-865
MH
MH
MH
MHz
To facilitate system setup and protect against RF interference, each system comes with multiple
predefined frequency groups and channels.
When using a single PAW-1000 system, the operating frequency will generally not have to be
changed. In an installation with multiple receiver/transmitter systems, each system must operate
on a separate channel. The group and channel system provides an optimum frequency spread
when using multiple receiver/transmitter systems.
Within a single frequency band, up to 16 individual receiver/transmitter systems may be used
in a single installation.
System Components
PAW-1000 Receiver Features
PAH-720 Handheld Transmitter
PAH-813 Handheld Transmitter
PBT-900 Body Pack Transmitter
PBT-1000 Body Pack Transmitter
System Setup
Rack-Mounting the Receivers
Tips for Improving System Performance
Troubleshooting
Specifications
PAH-1000 Handheld Transmitter
CATALOGUE
3
4
5
6
7
8
9
10
11
12
12
13
3
4
-
+
-
+
PL-10
PL-20 PH-20
PH-10
Wireless Microphone Systems
User Guide
TMglobal sound
1
2
10
3
4
5
6
7
8
9
1 2 3 4 5 6
PBT-1000
UHF PLL BodyPack Transmitter
11
12
On/Off switch
Infrared (IR) window
Channel 1 LCD panel
Please see System Setup on Page 10“”
System menu upward button
Please see System Setup on Page 10“”
System menu downward button
Please see System Setup on Page 10“”
Sync Button
Press to initiate IR connection between
receiver and transmitter.
System setup button
Please see System Setup on Page 10“”
Antenna A receiver indicator light
Light glows when Antenna A is on .
Antenna B RF indicator light
Antenna B receiver indicator light
Light glows when Antenna B is on .
Channel 1 audio indicator light
Antenna A RF indicator light
1
2
3
4
5
6
DC power adapter socket
Fine adjustment of mute threshold level
It is the mute enabling threshold value, which is factory setting and usually
does not need to be adjusted. If there are any interference signals,
this threshold value can be increased by turning the knob clockwise until RF
signal lamp goes out.
1/4in output socket
XLR output socket
Antenna Jack A
50 ohm.
Antenna Jack B
50 ohm
PAW-1000 Receiver Features
Front Panel
Rear Panel
PAW-1000 receiver
2 AA batteries
“”
A 1/4 RF connector
”
Power supply
Two antennas
PA-D40
User guide
PAH-1000 / PAH-720 / PAH-813 handheld transmitter
PBT-1000/PBT-900 bodypack transmitter
Microphone (choice of PL-10or PL-20
lavalier, PH-10 or PH-20 headworn)
System Components
All systems include:
Vocalist system includes:
Lavalier/ Headworn system includes:
bodypack transmitter
1/4 to mini 3-pin guitar cable
”
Guitar system includes
11
2 3 4 5 6 7 8
9
1
10
12
LAMP
POWER
ASC
BATT
PBT-1000
PBT-900
PAH-1000 PAH-813 PAH-720
PBT-1000
UHF PLL BodyPack Transmitter
LAMP
POWER
ASC
BATT
PBT-1000
PBT-900
6
BATT 1INFRARED
INFRAREDBATT
6
Condensor mic
Dynamic mic
LCD screen
Power source controlling switch
Microphone input sensitivity adjustment.
Left turn for output level decrease, right
turn for output level increase.
10
hours
PAH-720 Handheld Transmitter
Functions:
1
2
3
4
5
1
2
3
4
5
6
The handheld transmitter had five levels as shown on the left.
After the finishing the connection of the receiver and the
transmitter, the transmitters receiver keeps displaying the
numbers of the group and channel for 5 seconds, as
shown on the left, then back to the normal status display.
The transmitters shows battery power and working
frequency, as shown on the left.
Battery Status:
Group and Channel Display:
Normal Display:
Transmitter Status Display
1
2
3
5
Functions:
1
2
3
4
Interchangeable microphone head.
LCD screen
Power/Mute Control switch
Middle position is Mute.
IR Window
This window receives infrared signal so as
to keep frequency synchronization.
Select button
Battery Replacement
The life expectancy of two alkaline batteries is about 10 hours.
When the power indication symbol on the display screen keeps
flashing as shown in the left diagram, the batteries should be re
placed immediately, as shown in the above.
CLOSEOPEN
Push the button 2 second, the display will skip to the group MUTE/
and channel selection. Continuously push two times on the MUTE/
button to turn on function, to turn off the functionMUTE/ MUTE/
with the same operation.
Manually selecting the group and channel:
Pushing on the select button until the group and channel display
alternately, push the button while the group on the display to
change on the group, push the button while the channel on display
to change the channel.
Transmitter data lock and unlock:
Push the mute and select bottom at the same time can lock and unlock
the transmitter data. On the lock working condition, you can not change
the setting on the transmitter, but it will not lock the infrared synchronizer.
Battery displayer: Display the transmitter battery level.
select
select
select
select
+
Transmitter Status Display
Handheld Transmitter
1
2
4
3
PAH-1000 Handheld Transmitter
INFRARED
BATT
INFRARED
BATT
INFRAREDBATT
1
2
3
Handheld Transmitter
CLOSEOPEN
1
2
3
4
5
6
5 Microphone input sensitivity adjustment
6
Loading...