PASCO EM-8099 User Manual

Model No. EM-8099 012-08505A

Induction Wand

Model No. EM-8099

Equipment List

1

Included Equipment Replacement

Model Number*

1. Induction Wand

EM-8099

*Use Replacement Model Numbers to expedite replacement orders.

Additional Equipment Recommended (for experiments) Replacement

Model Number*

Faraday’s Law of Induction apparatus

ScienceWorkshop

DataStudio® software

A computer

®

interface (500 or 750 SCSI or 750 USB)

EX-9914

CI-6400 or CI-6450 or

CI-7650

various

(See PASCO catalog)

NA= not for sale at PASCO scientific

NA

®

3

Induction Wand Model No. EM-8099

Introduction

The PASCO EM-8099 Induction Wand is useful for demonstrations of
electromagnetic induction. It can be used in combination with the
PASCO EM-6711 Field Coil to a) verify Faraday’s Law and b)
measure the relationship between the magnitude of the induced
electromotive force and the angle of the magnetic field of a field coil

and a pickup coil.

1

Equipment Description

The 200-turn Induction Wand has a wire coil on one end and two
terminals at the other end. The terminals accommodate the banana
plug contacts, permitting easy connection to an electric circuit.

Specifications

Induction Wand

No. of turns 200 turns, #28 copper wire,

approximately 0.32 mm diameter

Coil dimensions inner diameter: 1.9 cm; outer

diameter 3.1 cm

Body material molded ABS plastic

Total wand length: 35.7 cm

Handle dimensions: width: 1.9 cm; height: 1.25 cm;

length: 31.5 cm

1

For an induction experiment, see Christopher C. Jones.

Faraday’s Law Apparatus for the Freshman Laboratory. Am. J

Physics. 1987; 55(12): 1148-1150.

CAUTION: Do not use
the wand at currents
exceeding 625 mA.

4

®

Model No. EM-8099 012-08505A

Technical Support

For assistance with the EM-8099 Induction Wand or any other PASCO products, contact
PASCO as follows:

Address: PASCO scientific

10101 Foothills Blvd.

Roseville, CA 95747-7100

Phone: [phone]

FAX: [phone]

Web: www.pasco.com

Email: [e-mail]

Limited Warranty

PASCO scientific warrants the product to be free from defects in materials and workmanship
for a period of one year from the date of shipment to the customer. PASCO will repair or
replace, at its option, any part of the product which is deemed to be defective in material or
workmanship. The warranty does not cover damage to the product caused by abuse or
improper use. Determination of whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made solely by PASCO scientific.
Responsibility for the return of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage and shipped postage or freight
prepaid. (Damage caused by improper packing of the equipment for return shipment will not
be covered by the warranty.) Shipping costs for returning the equipment after repair will be
paid by PASCO scientific.

Equipment Return

If the product requires return to PASCO scientific for any reason, notify PASCO scientific by
letter or phone before returning the product. Upon notification, the return authorization and
shipping instructions will be promptly issued.

®

5