PASCO EM-6713 User Manual

Instruction Sheet
for the PASCO
Model EM-6713

2000-TURN DETECTOR COIL

double plug

with resistor

012-06242B

09/98
$1.00

coil

wire

wand

handle

terminals

Introduction

The PASCO EM-6713 2000-Turn Detector Coil is useful
in demonstrations of electromagnetic induction. It can be
used in combination with the PASCO EM-6711 Field
Coil to verify Faraday’s Law, as well as to measure the
relationship between the magnitude of the induced elec­tromotive force and the angle of the magnetic field of a
field coil and a pickup coil.

1

Equipment

The 2000-Turn Detector Coil is a wire coil on one end of
a wand that has two terminals at the other end. The ter­minals accommodate banana plug contacts, permitting
easy connection of an electric circuit. A standard double
plug with a 10 kΩ resistor is included.

1

For details of the experiment, see Christopher C. Jones.
Faradays Law apparatus for the freshman laboratory.
Am. J. Phys. 1987; 55(12):11481150.

Specifications

2000 turns, #36 copper wire, approx. .13 mm diameter
Coil Dimensions: inner diameter: 1.9 cm

outer diameter: 3.8 cm
Body material: molded ABS plastic
Total wand length: 35.7 cm
Handle dimensions:width: 1.9 cm; height: 1.25 cm

length: 31.5 cm

ä

Caution: Do not operate at currents

exceeding 125 mA.

© 1996 PASCO scientific

2000-Turn Field Coil 012-06242B

Limited Warranty

PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman­ship. The warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return ship­ment will not be covered by the warranty.) Shipping
costs for returning the equipment, after repair, will be
paid by PASCO scientific.

Equipment Return

Should the product have to be returned to PASCO scien­tific, for whatever reason, notify PASCO scientific by
letter or phone BEFORE returning the product. Upon
notification, the return authorization and shipping instruc­tions will be promptly issued.

To Reach PASCO

For technical support, call us at 1-800-772-8700 (toll-free
within the U.S.) or [phone].

fax: [phone]
e-mail: [e-mail]
web: www.pasco.com

®