PASCO EM-6711 User Manual

Instruction Sheet
for the PASCO
Model EM-6711

200-TURN FIELD COIL

012-06176C

3/99

$1.00

Introduction

The PASCO EM-6711 200-Turn Field Coil is useful in
demonstrations of electromagnetic induction. It can be
used to verify Faraday’s Law, and it can be used to
measure the dependence of the size of the induced
electromotive force on the angle of the magnetic field of
the field coil and the pickup coil.

1

Equipment

The 200-Turn Field Coil is a wire coil on a bobbin that
has a base with three terminals that accomodate banana
plug contacts. These permit easy connection of either an
unmodified electric circuit (for measuring voltage) or a
circuit across a 1200 Ω resistor (for measuring current).

200 TURN FIELD COIL

Specifications

200 turns, #22 copper wire, approximately .65 mm
Coil Dimensions: inner radius: 9.8 cm

outer radius: 11.05 cm
average radius: 10.5 cm

Body material: molded ABS plastic

ä

Caution: Do not operate at currents exceeding

2 amps.

1

For details of the experiment, see Christopher C. Jones.

Faradays Law apparatus for the freshman laboratory.
Am. J. Phys. 1987; 55(12):11481150.

© 1996 PASCO scientific

200-Turn Dectector Coil 012-06176C

Limited Warranty

PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workman­ship. The warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return ship­ment will not be covered by the warranty.) Shipping
costs for returning the equipment, after repair, will be
paid by PASCO scientific.

Equipment Return

Should the product have to be returned to PASCO scien­tific, for whatever reason, notify PASCO scientific by
letter or phone BEFORE returning the product. Upon
notification, the return authorization and shipping instruc­tions will be promptly issued.

To Reach PASCO

For technical support, call us at 1-800-772-8700 (toll-free
within the U.S.) or [phone].

fax: [phone]
e-mail: [e-mail]
web: www.pasco.com

®