Instruction Sheet
for the PASCO
Model CI-6692
IDS MOUNT ACCESSORY
012-06010A
5/96
$1.00
The PASCO CI-6692 IDS Mount Accessory is designed
for use with the PASCO CI-6538 Rotary Motion Sensor
or the PASCO CI-6625 Rotary Motion Sensor for ULI.
This bracket allows the Rotary Motion Sensor to be easily
attached to the PASCO Introductory Dynamics System
tracks (1.2 meter ME-9435A or 2.2 meter ME-9458).
washer
RMS
mounting rod
thumbscrew
(2)
bracket
square nut
Dynamics Track
Attaching the Bracket to the Track
© 1996 PASCO scientific
This instruction sheet written by: Jon Hanks
®
Phone (916) 786-3800 • FAX (916) 786-8905 • web: www.pasco.com
10101 Foothills Blvd. • Roseville, CA 95747-7100
better
ways to
teach science
IDS Mount Accessory 012-06010A
RMS
Accessory
Dynamics CartIDS Mount
string
Dynamics Track
Adjustable End-
Stop
3-step Pulley
Mass Hanger
and mass
Equipment Setup Using RMS Like a Smart Pulley
Limited Warranty
PASCO scientific warrants this product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace, at its option, any part of the product
which is deemed to be defective in material or workmanship. This warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return shipment will not be covered by the warranty.) Shipping
costs for returning the equipment, after repair, will be
paid by PASCO scientific.
To Reach PASCO
For Technical Support call us at 1-800-772-8700 (tollfree within the U.S.) or (916) 786-3800.
email: techsupp@PASCO.com
Tech support fax: (916) 786-3292
Web: http://www.pasco.com
2
®