Party Light & Sound PARTY-7LED, PARTY-8LED Instruction Manual
STAND-ALONE ACTIVE SPEAKER WITH BLUETOOTH, USB, SD & LED ILLUMINATION
ENCEINTE ACTIVE AUTONOME AVEC BLUETOOTH, USB, SD & ANIMATION LUMINEUSE
BATTERIEBETRIEBENER AKTIV-LAUTSPRECHER MIT BLUETOOTH, USB, SD & LED LEUCHTFLÄCHE
STAND-ALONE ACTIEFLUIDSPREKER MET BLUETOOTH, USB, SD & LED PANEEL
Imported from China by LOTRONIC SA – Av. Z. Gramme 9 – B-1480 Saintes
PARTY-7LED/PARTY-8LED
GB - INSTRUCTION MANUAL
F - MODE D’EMPLOI
D - BEDIENUNGSANLEITUNG
NL – HANDLEIDING
©Copyright LOTRONIC 2016 PARTY-7LED & PARTY-8LED 1
PARTY-7LED
PARTY-8LED
©Copyright LOTRONIC 2016 PARTY-7LED & PARTY-8LED 2
GB
Please read the manual carefully and keep it for future reference.
The lightning flash with arrowhead symbol, within an equilateral Triangle, is intended to alert the user to the
presence of not insulated dangerous voltages within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION:
1. Do not place any recipients filled with liquids, such as glasses or vases, on top of or directly next to
the appliance. They could fall over, causing water to enter the appliance. Never pour out liquids
over the appliance. Do not place small objects, such as coins or paper clips, on the appliance since
they could fall inside the appliance and cause fire or a shock hazard! If any liquid or objects enter
the appliance, pull immediately the mains plug out of the socket and contact a specialist.
2. 0nly pull the mains plug out of the socket by the intended gripping surface. Do not pull it by the
cable.
3. Never plug the mains plug in or out with damp or wet hands
4. Electrical appliances must be kept out of the reach of children. Be particularly careful if children are
present. Children are not aware of the hazards involved in handing electrical appliances
improperly. Children could attempt to poke objects into the appliance. There is a life-threatening
danger of electrocution.
5. Never place the appliance on an unstable or mobile surface. Persons could be injured or the
appliance damaged by it falling down.
6. AII persons involved in operating, installing and servicing the appliance and putting it into service
must be trained and qualified accordingly and observe these operating instructions.
7. Defective mains cables may only be replaced by specialists. Danger of shock hazard!
8. If you are not sure about the correct connection or if questions arise which are not answered by
the operating instructions, please do not hesitate to contact support or a specialist of your choice.
Consult a specialist if you are in doubt about the operating principle or the safety of the product.
9. Please unplug the adaptor and switch the unit off if you don’t use it for a long time, to avoid damage
due to voltage surges.
Description of the rear panel
1. Master volume control
2. Microphone volume control
3. Echo control for the microphone
4. Microphone input
5. Switches the LED on the woofer on /off
6. When the power adaptor is connected, the indicator lamp lights up in red as long as the battery will be
charging. It lights up in green, when the battery is fully charged.
7. FM antenna: Extend to its full length for optimal reception
8. AUX input via 3.5mm mini stereo jack
9. Input selector: Press this button to switch between the various inputs (AUX, USB, SD, Bluetooth, FM)
10. REC button: Press this button to record the sound of the wired or wireless mic on the USB or SD.
11. REPEAT: Press to toggle between repeating the current track or repeating all tracks.
12. In USB/SD/Bluetooth mode: press to go back to the previous track. In FM mode: press to go to the
previously stored FM station.
©Copyright LOTRONIC 2016 PARTY-7LED & PARTY-8LED 3
13. Play/pause in USB/SD/Bluetooth mode. In FM mode, press and hold this button to start searching for
radio stations and store them automatically in the memory
14. In USB/SD/Bluetooth mode: press to go to the next track. In FM mode: press to go to the next stored
FM station.
15. USB stick input
16. Mini SD card input
17. ON/OFF switch of the system
18. Power LED: Light up when the system is switched ON
19. AC input connector
CONNECTION OF THE WIRED MICROPHONE
Connect the microphone to the MIC IN socket and switch it on.
Note: If you are playing music from any other input, connecting the microphone will not mute the sound
output.
KARAOKE Function
This feature is available with any input. Play a track through AUX/USB/SD/FM/Bluetooth, connect a
microphone and sing along.
Built-in REC function
1. Plug a microphone into the MIC IN input.
2. Insert a USB/SD card into the corresponding port. Press Input selector button and select USB/SD mode.
3. If the USB/SD card is plugged into the speaker for the first time, the system will automatically create a
folder named ‘record’ to save the recorded files.
4. When you are ready to record, press REC button to record the sound of the wireless or wired
microphone.
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could
generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC
card and re-plug it. The speaker should be back to normal status.
The maximum size of USB/SD device that can be connected is 32 GB.
Supported music formats: MP3, WMA
FM RADIO FUNCTION
1. Turn on the unit and press repeatedly the input selector key on unit and select FM function (the display
will show the frequency).
2. Press the PLAY/PAUSE button on the unit or the key on remote control to activate the auto
memory (the radio starts an automatic search for available radio stations and saves them automatically).
The station's number stored depends on the radio signal in your area.
During the search, press PLAY button on the remote control to stop searching.
3. Use the and keys to listen to the various radio stations saved in memory.
4. To change to a preset station, use the number keys on the remote control.
For example, to call up the station number 12, first press 1 and then 2.
©Copyright LOTRONIC 2016 PARTY-7LED & PARTY-8LED 4
BLUETOOTH OPERATION
Problem
Possible cause
Solution
No sound when
power on
1. No input source
2. Volume down
1. Connect an AUX signal
2. Adjust volume
No sound from the
1. Bad mic connection
3. Mic volume down
1. Plug in the mic properly
3. Increase mic volume
No sound after
card
1. Incorrect file format
1. File format should be MP3
If Speaker makes
1. Microphone switched on but
placed very close to the speaker.
1. Keep the microphone 2
1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "BT SPEAKER".
4. Press the to start playing and the buttons and for the selection of songs.
CHARGING THE UNIT
This speaker has a high capacity battery. Please use the supplied lead for charging.
The power adapter has an indicator light that will illuminate red when the speaker is on charge. It takes
around 6-8 hours to fully charge the speakers. Disconnect the power adaptor as soon as the battery is
fully charged.
Note: When the battery of the speaker is low, please charge it within 48 hours.
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can’t be solved, please contact your
retailer.
microphone
inserting USB/SD
loud noises
2. Mic not switched on
2. Bad connection of USB/SD card
may be too close to the speaker
2. Microphone switched on but is not
being used.
3. Microphone volume may be too
loud
4. Mobile phone is being used too
close to the speaker
5. Other wireless equipment may be
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local
authorities or your dealer about the way to proceed.
2. Switch mic on
2. Plug in USB/SD card properly
meters away from the speaker
2. Turn off microphone if not in use.
3. Adjust microphone
volume to lower mode
4. Keep mobile away from the
speaker whilst attending a call.
5. Keep the speaker away from
other wireless equipment
©Copyright LOTRONIC 2016 PARTY-7LED & PARTY-8LED 5
Loading...