Partron URBAN S BAND, PWB-200, Croise URBAN-S User Manual
User Manual
URBAN S BAND
(PWB-200)
Table of Contents.
1. Product Specifications
2. Components
3. Name of Each Part and
Description
1) Main Body
2) Power On and Off
3) Separation of Main Body
4) Charging the Battery
4. URBAN S Band Usage
1) Normal Mode
2) Exercise Mode
5. URBAN S Band Mode Explanation
1) URBAN Mode
2) Exercise Mode
3) Other Indication Items
4) Measurement of Heart Rate and Altitude
6. URBAN S App Tutorial
1) Reading Tutorial
2) Running the App for the First Time
3) Setting Up a Profile
4) Bluetooth Connection
5) Menu Screen
7. URBAN S App Mode Explanation
1) URBAN Mode
2) Exercise Mode
8. Storage and Maintenance
1. 1. Product Specifications
Product Name
Croise URBAN-S
Product Type
Smart Band
Model Name
PWB-200
Manufacturer
Partron Co., Ltd.
Certification
KC
Water Resistance
IPX8
Display
LED Matrix(24x5)
Sensor
Heart Rate, Atmospheric Pressure, 6-axis
Accelerometer
Communication Mode
Bluetooth 4.0
Compatible with
Android 4.4 or above / ios 8.0 or above
Main Body Size
49.10 x 15.30 x 10.9 [mm]
Product Weight
17g
Battery Capacity
80mAh
Product Components
Main Product, Charging Cradle, Quick User Manual
Customer Center
031-201-7707
2. Components
.
2. Name of Each Part and Description
1) Name of Each Part and Description
2) Power On and Off
(1) Power On: When you press and hold the button for more than 3 seconds, the
system powers on with the message saying 'Hello!'.
(2) Power Off: When you press and hold the button on the battery indicator screen for
more than 3 seconds, the system powers off with the message saying 'Bye!'
3) Separation of Main Body
1. Hold the main body.
2. Detach the slide by
pressing down the
connecting parts of the
band on both sides.
3. Push in the opposite
direction to insert it.
<Main Body>.
<Band>
<Charging Cradle>
<Front>
<Back>.
Button
PPG (Heart Rate) Sensor
4) Charging the battery
4. URBAN S Band Usage
1) Normal Mode
Each time you press the button of the band on the initial screen, the number of steps,
heart rate, and battery level are indicated in turn.
1. Detach the main body.
2. Install the main body
onto the charger.
3. Connect the 5-pin charging
connector to the cradle installed.
2) Exercise Mode
When you press the button of the band twice on the initial clock screen, 'START' is
indicated on the screen.
Exercise Mode can be used during the workouts such as walking, running, climbing,
and cycling.
You can indicate the information of your choice using the settings menu in the App.
Note
To set up your exercise route and exercise mode and to check the exercise route, we
recommend that you start or finish a workout in the App. If you use the band only,
information such as the exercise route will not be indicated.
5. URBAN S Band Mode Description
1) URBAN Mode
- Urban Mode measures the number of steps and the heart rate by checking the user
condition.
※ Caution: The number of steps can still be counted if your wrist moves while you are not walking
such as when you are driving a car on an uneven ground while wearing a band.
시간 : 현재 시간을 표시합니다. 오전, 오후 경우 좌측 모양으로
LED가 상 단 하단 으로 나 뉘어 표 현 됩 니다 .
걸음 수 : 하루 동안의 걸음 수를 나타냅니다.
심박 수 : 앱 메뉴에서 설정한 주기마다 측정된 수치를 표시 합니다.
배터리 : 남은 배터리의 잔량을 표시 합니다.
(Ap p에서 는 10% 단위 로 표 시 합니 다.)
1 cycle (*Detailed settings are available in the App.)
Time: Indicates the current time. As shown on the left, the LED light on the upper or
lower section indicates the a.m. and the p.m. respectively.
Number of Steps: Indicates the number of steps you made in a day.
Heart Rate: Indicates heart rate measurements for each cycle as set from the App Menu.
Battery: Indicates the remaining battery level.
(The App indicates it by the unit of a 10%)
2) Exercise Mode
- Exercise Mode reports the information about your exercise based on your specific
workout mode: walking, running, climbing or cycling.
(The workout information can vary according to the environment and the physical information.)
- During the exercise mode, you can check your burned up calories, distance, pace, and number of steps.
Note
If you want to have the above information shown on the band display, you can set it up
under the ‘Menu-Settings in the URBAN-S App’.
필수
표시
항목
스타트 : 운동 모드의 시작을 표시 합니다.
운동시간 : 실행되고 있는 운동 시간을 표시 합니다.
심박 : 주기마다 측정되는 심박 수를 표시 합니다.
소모 칼로리 : 운동 시 소모 된 칼로리(kcal)를 표시 합니다.
거리 : 운동 시 이동 한 거리(Km)를 표시합니다.
속도 : 운동 시 평균 속도(Km/h)를 표시 합니다.
걸음 수 : 운동 시 총 걸음 수(Steps)를 표시합니다.
고도 : 운동 시 고도(M)를 나타냅니다.
선택
표시
항목
Start: Indicates the start of the exercise mode.
Time of Exercise: Indicates the current time when you are
doing your workout.
Heart Rate: Indicates the heart rate measured at each cycle.
Burned Up Calories: Indicates the burned up calories (in kcal)
during the workout.
Distance: Indicates the distance you traveled (in km) during
Pace: Indicates the average speed of your exercise (in km/h)
during the workout.
Number of Steps: Indicates the total number of steps you
made during the workout.
Altitude: Indicates the altitude (in m) during your workout.
Essential
Indication Items
Optional
Indication Items
3) Measurement of the Heart Rate and the Altitude
You can measure your heart rate and altitude anytime anywhere.
Note
The measurement of the heart rate and altitude cannot be performed from the band
alone.
(The measurement can be performed using the App. The altitude is measured based on
the atmospheric pressure data from AccuWeather, and the measured altitude may vary
due to the difference from the actual atmospheric pressure.)
4) Other Modes
You can measure your heart rate and altitude anytime anywhere.
그외
표시
항목
전화 : 연결 된 스마트폰에 전화가 왔음을 나타냅니다.
SNS : 연결 된 스마트폰에 SNS 알림이 왔음을 나타냅니다.
SMS : 연결 된 스마트폰에 문자가 왔음을 나타냅니다.
BT 끊김 : 연결 된 스마트폰과 밴드의 연결이 끊겼음을 나타냅니다.
<Heart Rate>
<Altitude>
Call: Indicates an incoming phone call at the connected
smartphone.
SNS: Indicates an SNS notification at the connected
smartphone.
SMS: Indicates an incoming text message at the connected
smartphone.
BT Disconnection: Indicates that the connection between the
smartphone and the band has been lost.
Other Indication
Items
Loading...