PARTRON PSB100 User Manual

1. Model Name : Neck Band Bluetooth Headset

This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.

- Consult the dealer or an experienced radio/TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.

FCC Compliance Information

2. Part Number : PSB-100

3. Manufacturer : PARTRON Co., Ltd.

4. Country of Origin : Republic of Korea

5. Address : 22, Samsung 1-ro 2-gil, Hwaseong, Gyeonggi 445-170, Korea

- Please take the time to follow the instructions in this owner’s guide carefully.

- Appearance and specifications of this product are subject to change without prior notice for product
improvement.

This device must accept any interference received, including interference that may cause undesired operation.

Package Contents

PSB-100 User Manual

Package Contents

Description of Parts

Installation of Cable Clip

Product Specifications and Features

How to use

Power on/off
Charging
Pairing
Calling
Transferring a Call
Volume Control
Music Play
Multi-Connection
Using Croise.R Reader Application
Button Functions and Status Information

Precautions

Product Warranty and Service

Limited Warranty

Product Warranty Certificate

Package Contents

Cable Clip

Earbud Covers(Large/Small)

USB Charger

User Manual

※ The components of above package are subject to change without notice to improve the
product performance or quality.

PSB-100

Installation of Cable Clip

Placing cable clip
to the earphone
cable.

※ The components of above package are subject to change without notice to improve the
product performance or quality.

Put the clip into
the earphone
cable firmly.

Have the clip
fixed into the
neck band.

PSB-100 Headset Features

Volume Up
Volume Down

Calling

On/Off

USB Charging Port

Microphone

Product Specifications and features

Standby Time

Operating Time(Music)

Operating Time(Talk)

Charging Time

Battery

Working Distance

Supported profiles

Decoder

Bluetooth Version

※ Above operating time subject to change based upon connected devices or
the surrounding environment.

400 hours

12 hours

12 hours

2 hours

Lithium Polymer Battery 3.7V (195mAh)

10m

Next Track/FF

Previous Track/REW

Play/Pause

Using the Headset

1. Power On / Off

Power On

- Place the power slide switch to ‘ ’

- The red + blue LED light flashes for 0.5 second and Power is turned on with voice guide.

Power Off

- Place the power slide switch to ‘ ’

- The red + blue LED light flashes for 0.5 second and Power is turned off with voice guide.

2. Charging

LED indicator

- When the charger is connected, the Red LED is on.

- When charging is completed, the Blue LED is on.

※ When the charger is connected, the headset will be disconnected from the device.
※ The power turns off when USB charger is disconnected.

6. Pairing

Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device.

* Pairing: Connect between Bluetooth-enabled Device and Headset.

- Slide the power switch up to the ‘ ’.

- After power on, the headset will automatically enter to pairing mode.
(The red/blue LED light flashes).

- The headset will automatically enter to waiting mode if it is not connected for 3 minutes.
(The power is automatically after 50 minutes with waiting mode)

- On the device you want to have paired, find the Bluetooth menu and search & select
“PSB-100” from the list of devices.

- If connected without any problem, the headset will be paired with audio guide
“Connected”

- Once pairing is complete, it will be paired automatically afterwards.

※ Manual Pairing

- Hold Call button for 2 second while placing power slide switch to ON then it will enter
to Pairing mode with voice guide “Start pairing”.
And Register the PSB-100 in above same way.

- If PIN code is required, please input “0000”.

Recommendations

- Using USB Hub may take extra charging time due to the low current.
For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger.

※ It takes approximately 2 hours to have it fully charged when battery exhausted

3. Battery Status Alarm & Alert

- Press Call and Play/Pause button at the same time for a second for audio
guidance for the current battery level.

“Battery Full”
“Battery Half”
“Battery not enough”

4. Low Battery Alarm & Alert

- The red LED light flashes 3 times with voice guidance “Battery not enough” if the battery
is less than 1 hour use.

5. Critical Battery

- The notice continues every 2 minutes if the battery is less than 10 minutes use and
power is turned off with voice guidance “Battery Empty” at the critical battery.

Clearing Paired Device

- Hold call button for 1 second and Volume button while placing power slide
switch to ON then paired device will be cleared with voice guide “ Clear Paired List”
and enter to Pairing Mode.

7. Calling

Voice Dialing

- Briefly press Call button to activate Voice Dial.

※ To use Voice Dialing, your mobile phone must support Voice Dialing.

Last Number Dialing

- Press Call button for 1 second, the mobile phone will call the last number dialed.

8. Call Answer / Call End / Call Reject

Call Answer/Call End

- Briefly press Call button to answer the incoming call.

- Briefly press Call button to end the call.

Call Reject

- Briefly press Call button to reject the incoming call.

9. Transferring a Call

- During the call, press Call button for 3 second, audio will be transferred from headset to
mobile phone.

- And press Call button for 3 second again, audio will be transferred from mobile phone
to headset.

10. Setting Waiting Mode while Calling

Setting Waiting mode

- During the call, briefly press Call button twice and enter to call waiting mode.
Pressing Call button twice again back to the call mode.

※ To use Call waiting mode, the mobile phone must support ‘Call waiting’ service.

Incoming second call while calling

- Briefly press Call button to end the original call and answer the second call.

- Briefly press Call button twice to answer the second call without hanging up the
original call (Original call will be call waiting mode)

Ending a Call

- Briefly press Call button.

Previous Track

- Press ‘Previous Track’ button to select previous song.

Next Track

- Press ‘Next track’ button to select next song.

Rewind

- Press and hold ‘Previous Track’ button.

Fast Forward

- Press and hold ‘Next track’ button.

16. Using Croise.R Reader Application

You can use the additional functions through “Croise.R Reader” such as Manner

mode, Volume Default Setting, Message Reading and so on.

- To use this application, you can search “Croise” or “Partron” in the Google Play
Store to install.

※ Support Android Ver. 4.30

11. Volume Control

Volume Up

- While calling or listening the music, briefly press Volume ‘+’ button.

- While calling or listening the music, press and hold Volume ‘+’ button for continuous
volume up.

Volume Down

- While calling or listening the music, briefly press Volume ‘-’ button.

- While calling or listening the music, press and hold Volume ‘-’ button for continuous
volume down.

Mute

- During the call, press Volume ‘+’, ‘-‘ button at the same time for mute.

- Press Volume ‘+’, ‘-‘ button at the same time again to cancel the mute.

※ User can hear the long beep at maximum and minimum volume.

12. Music

To Play/Pause a Music

- To play a song or pause playback, press ‘Play/Pause’ button.

Music Stop

- Press ‘Play / Pause’ button for 1second.

14. Multi-Connection

Multi-connection is useful to link more than a mobile device.

Pairing

- Proceed pairing of the first device manually.

- Power off the headset upon registration of the first device is completed.

- Power on holding the call button for pairing mode.

- Pairing 2nd device for registration.

- Connecting 1st device to the headset.

Calling

- Ring tone sounds when the second device has incoming call while you are talking
through first device.

- You can operate the same as "Setting Waiting Mode while Calling".

Listening Music

- In multi-pairing mode, key control is available for the first played device.

- Press Play/Pause button briefly to stop playback from the first device.
Then key control is available for 2nd Device.

15. Auto Reconnect

Automatic connection when headset is turned on

- If it kept the information of previously paired device, it will be automatically connected
when headset is turned on.

※ If it failed automatic connection, briefly press Call button once to connect.

Out Of Range

- If a connected device is more than 10m away from the device, voice guides
"Disconnected" with the vibration.

- The notice continues every 30 seconds for three minutes and it automatically connects
if the device is placed in a connection range.

16. Using Croise.R Reader Application

You can use the additional functions through “Croise.R Reader” such as Manner mode,
Volume Default Setting, Message Reading and so on.

- To use this application, you can search “Croise” or “Partron” in the Google Play Store to
install.

※ Support Android Ver. 4.30

17. Button function and status information

Function

Power On

Power Off

Volume Up

Volume Down

Answer Call

Reject Call

Call Cancel

Mute

Transferring a call

Call Waiting

Voice Dial

Action Status

Briefly press

* Press long for continuous volume up

Briefly press

* Press long for continuous volume down

Briefly press

Press for 1 sec

Briefly press during the call

Press simultaneously
during the call

Press for 3 seconds

Press quickly twice

during the call

Briefly press on standby status

17. Button function and status information

Function Action Status Function Action Status

Connection to
Mobile Phone

Last Number
Redial

Pairing Mode

Battery
Status check

Briefly press on
connection standby status

Press for 1 sec
during standby status

Press and
simultaneously locate

Press and for
1sec simultaneously

Red, Blue LED lights flash in turn

Connected

Disconnected

Link Loss

Pairing

Connection

information delete

Battery Status Notice

Danger

Insufficient

Normal

Sufficient

Connected

Disconnected

Out of Range

Start paring

Clear Paired List

Red, Blue LED flash
"Battery Empty."

Red LED flickers 3 times quickly
"Battery not enough"

Red LED flickers 3 times quickly
“Batter Half”

“Battery Full”

Play / Pause

Play / Pause

Play / Pause

Play / Pause

Play / Pause

Play / Pause

Play / Pause

Play / Pause

Briefly press

Press for 1 sec

Briefly press

Briefly press

Press and hold

Press and hold

Connect the cable for
the recharge

Red LED is on

Blue LED is on

LED light flashes when charger cable is removed
(Power off)

Red and Blue LED will be on simultaneously
for 0.5 sec and out. Power on

Red and Blue LED will be on simultaneously
for 0.5 sec and out. Power off

8 levels of Volume

8 levels of Volume

Receiving a call

Dialing a call

During the call

Standby

Disconnection

Blue LED lights flashes slowly

Blue LED light flashes twice in
every 5 sec

Red LED light flashes once in
every 3 sec

Blue LED light flashes

Precautions Product Warranty and Service

• Do not disassemble or modify. It may cause fire and disorder.

• Do not use or place the product at high or low temperature.

• Do not place the product near the high humidity, volatile, or flammables.

• Please be cautious not to shock on the product.

• It might give negative effect on the ear hearing if used for a long time in high volume.

• This bluetooth device might be damaged if either over 1A/1000mA of charger or the

defective charger is used.

• In the case using car charger, the high output from truck may affect to the device.

Also please have the device disconnected from the cigar jack charger which may affect to

the device when starting the car engine.

Product Warranty

•The warranty is valid only if the original receipt issued to the original purchaser by the dealer.

•If the product label is removed, physical change of the product or unapproved repair by the

3rd person, will invalidate of the warranty.

•The consumables, such as ear cap, battery and other accessories, which have limited life,

will be excluded from the product warranty.

•This Warranty do not cover for the damage and accident by the misuse.

This Warranty do not cover the lost and damage of the product on either

•

transportation or delivery.

• This device passed strict quality management and inspection process.

• Warranty period is 1 year.

• Even in the warranty period, you can be charged for the paid service if needed.

• Product dimension and outer appearance might be changed for the quality improvement

without advance notice.

• This device cannot be used for the human rescue related service as it have the interference.

Guide for the Paid Service

• After Product Warranty Period (1 year/6 months for the battery)

• User's negligence or any failure from improper disassemble, repair and modification.

• Failure caused by acts of God such as fire and flood.

• Failure using other options which is not provided from Partron.

• This Warranty does not cover product failures due to improper repair installations, modifications

or service performed by a non-authorized person.

• Any Consumable parts.