Partner SP-3515, SP-3511 Quick Start Manual
SP-3511/ SP-3515 Quick Start Guide
WARNING
The system uses a
is a risk of explosion if the wrong battery type is used when replacing. Dispose of used
batteries according to local ordinance regulations.
WARNING
This is Class A Product. In domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
警告使用者
這是甲類的資訊產品，在居住的環境中使用時，可能會造成射頻干擾，在這種情況下，使用者會被要求採取
某些適當的對策。
3
2032
V CR
battery mounted on the mainboard to keep time. There
Identifying components
MSR
IC Reader
2
D Scanner RFID
2
optional display sizes
”
6
.
15
”
6
.
11
iButton/
Fingerprint
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case users will be required to correct
the interference at their own expense
Safety information
• Before installing and using the machine, take note of the following precautions:
• Do not place the unit on an unstable surface, cart, or stand.
• Do not block the slots and opening on the unit, which are provided for ventilation.
• Only use the power source indicated on the marking label. If you are not sure,
contact your dealer or the Power Company.
• When replacing parts, ensure that your service technician uses parts specified by the
manufacturer.
• Do not place anything on the power cord. Place the power cord where it will not be in
the way of foot traffic.
15
of the FCC Rules. These limits are designed to provide
VGA
DC12V-In
11
RJ-
Cash drawer port
USB 2.
0
USB
LAN
3.0
USB 2.
Power Button
2
1
COM
0
COM
COM
I/O Panel
12
4
DC
V-OutCOM
3
Specification
3511
Item
Display
Touch Projected capacitive touch (Multi Touch)
Processor Intel
Memory
LAN
Storage Internal 2.5” type SATA HDD
I/O Interface
Expansion Options
Speaker
Optional Peripherals Biometric Reader, Smart Card Reader, I-Button, RFID reader
Operation System Window
Power Supply AC
Dimensions
Operating Temp
Storage Temperature -
Humidity
Certification CE, FCC, VCCI, BSMI, CCC, CB, Class A
®
Bay Trail-D J
204
pin DDR3L-
10/100/1000
4
* COM ports (powered with DC +5/+12V, COM1~2 by BIOS selection; COM3~4 by
jumper setting)
1
* RJ11 port supports 2 cash drawer(DC+24V)
1
* RJ-45 LAN port with activity and link LEDs
5
* USB 2.
1
* USB 3.
1
* DC+12V input power-jack
1
* DC+12V output
1
* VGA port
1
* Mini PCI-e, Support Wireless LAN module
2* 3
W
Camera
3
tracks magnetic reader (USB interface)
2
D Barcode Scanner
100~240
302*369*298
0°
C ~ +
20°
C ~ +
15%~80
SP-
Touch Terminal
11.6” 1366x768 15.6” 1366x768
1333
Gb Ethernet x
0
0
2.0
M
7
, POS Ready7, Window 8.1, Industry 8.1 , Linux (Ubuntu)
V/DC+12V,7.5A, 90 watt power adapter
(W*H*D)
40°
C
60°
C
%
1900 2.0
G up to 2.4G, 2M Cache
SO-DIMM x 2, Max Support 8GB
1
390*401*298
3515
SP-
Touch Terminal
(W*H*D)
Quick start
1
. Connect the power cable to the DC-IN connector located on
the I/O panel.
2
. Plug the power cable into an electrical outlet.
3
. Press the power button on the right underside of the
computer.
Note: Press once to power on the system. Press it for
4~5
seconds to force the system power off.
Loading...