PARS EcoTech S.L. WM 6.0 Owner's Manual

Save Energy, Save our Planet

PARS EcoTech S.L.

Malaga, Spain

[e-mail]

www.pars-ecotech.com

PARS EcoTech

WM 6.0 Evaporative Cooler

Owner’s manual

Table of Contents:

General information……........................................................2

Introduction............................................................................3

Unit operation.........................................................................3

Please note.............................................................................3

Before starting........................................................................4

Installation requirements........................................................6

External fixing of the unit........................................................7

Internal fixing of the unit.........................................................8

Problem solving....................................................................10

Water connection..................................................................12

Commissioning.....................................................................12

Maintenance..........................................................................13

Filter pads..............................................................................15

Water tank..............................................................................15

Water distributor.....................................................................15

Water level/Float valve...........................................................16

Electrical................................................................................16

Maintenance Planner.............................................................17

Specifications........................................................................18

Specifications:

Airflow

6000 m3/h

Window section

550*550*260 mm

External cabinet

1180*860*250 mm

Net weight

35 kg

Power supply

220 V / 50 Hz

Power consumption

0.25 kw

Motor

0.15 kw / 3 Speed

Noise

60 dB

Packed size

1220*900*420 mm

1

18

Maintenance planner:

ALL MAINTENANCE CAN ONLY BE PERFORMED BY A QUALIFIED SERVICE PERSON.

Service

Should list

1st

Year

2nd

Year

3rd

Year

4th

Year

5th

Year

PRESEASON

CHECK

Check quality of filters

Check fan & pump

Fill unit with water

Start unit

FIRST

MIDSEASON

SERVICE

Check and clean filters

Drain, clean and refill water tray

Check filters

Check unit operates correctly

SECOND

MIDSEASON

SERVICE

Check and clean filters

Drain, clean and refill water tray

Check strainers and filters

Check unit operates correctly

END OF

SEASON

SERVICE AND

SHUT DOWN

Turn off water supply

Drain and clean unit
Leave drain plug removed

Check motor and pump and

spray with a water

displacement lubricant

GENERAL INFORMATION

Thank you for purchasing a quality Evaporative Cooler, We care about your safety

and would ask you to spend a few minutes reading these simple instructions before

installing or operating this product.

Safety

Read carefully all of these instructions prior to installing and operating the unit.

 Read and Save these Instructions .Do not throw these Instructions away
 Installations of this cooler in any manner not prescribed by these instructions

could cause a safety issue and WILL void any warranty

 Use only with a 220v 50Hz single phase grounded outlet.
 Unplug the cooler and turn off the machine when installing, servicing or

cleaning.

 Do not operate cooler with Rear filter panel removed.
 Do not operate cooler with a damaged cord, plug or other component.
 Do not run the power cord under carpet or other floor covering
 Do not sue the cooler with an improperly grounded outlet.
 Do not alter or modify this cooler.
 Do not allow children to install, operate or service this cooler.
 WARNING: To reduce the risk of fire or electric shock, do not use this product

with any solid state speed control device.

 Use only qualified electricians for replacement or servicing of switches, or

electrical motors.

 This Window Mounted Cooler is suitable for installation in windows (either sash

hung or sliding) with a minimum opening width of 550 mm and height of 550

mm please ensure that the directions for correct mounting are adhered to for

the SAFE operation of this cooler.

 Ensure there is a minimum 100mm clearance above the external cabinet for

maintenance purposes.