Parker F1, F1-41, T1, F1-25, F1-51 Service Manual
...
Bulletin HY30-5501-M1/UK
Service Manual
Series F1/T1
Effective: June, 2018
Supersedes: December, 2016
HY30-5501-M1/UK
Service Manual
Series F1/T1
List of contents Page
New attributes on F1/T1............................................................................3
...........................................................4
Check of shaft seal....................................................................................5
..............................................................6
Direction of rotation ...................................................................................8
...........................................................................................9
..............................................................................................10
Split view / spare parts ............................................................................ 11
Split view / spare parts (motor)................................................................12
Spare part kits and tools..........................................................................13
Conversion factors
3 3
1 cm
!
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED
HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
-
Please contact your Parker representation for a detailed ”Offer of Sale”.
Offer of Sale
2
Pump and Motor Division
Trollhättan, Sweden
Bulletin HY30-5501-M1/UK
F1/T1
The F1/T1 series offers many additional
container lifts, skip loaders, forest cranes,
tions.
-
Service Manual
Series F1/T1
-
New features of the F1/T1 are:
ments
... thanks to:
F1-25/-41/-51/-61.
-
F1-81/-101.
All of this in addition to previous
features:
temperture shocks
ISO standard
3
Pump and Motor Division
Trollhättan, Sweden
HY30-5501-M1/UK
Displacement [cm
Max operating pressure [bar]
Shaft speed [rpm]
Service Manual
Series F1/T1
F1 frame size 25 41 51 61 81 101
3
/rev] 25,6 40,9 51,1 59,5 81,6 102,9
1)
[l/min]
continuous 350 350
intermittent 400 400
2)
185
2)
at 400 bar
Torque [Nm]
Input power [kW]
Weight
Pump cross section
1)
2600 2400 2200 2200 20002)1800
1) 2)
on mineral oil at a viscosity of 30 mm2/s (cSt).
2) Valid with 2
1
/2” inlet (suction) line.
6
2)
Design and function
F1 is a piston pump with sherical pistons (1)
o
to the shaft (3). When the shaft
rotates, the pistons move up and down in the cylin-
connects the cylinder barrel to the drive shaft, cau-
4
2
4
1
eliminates a separate drain line to the tank. F1 is
direct to PTO´s with ZF standard.
4
Pump and Motor Division
Trollhättan, Sweden
5
Bulletin HY30-5501-M1/UK
Service Manual
Series F1/T1
Check of Shaft Seal and seal towards PTO
Indication hole is placed under the protection cover.
-
Note:
-
5
Pump and Motor Division
Trollhättan, Sweden
Loading...