parker ASIC Performer User Manual

查询PTX.0103.100供应商

ASIC ‘Performer’

Pressure Transducers
and Transmitters

20, 60, 100, 250, 400 and 700 bar

Brochure: HYD030GB1

ASIC ‘Performer’

Pressure Transducers and Transmitters

APPLICATIONS FOR THE ASIC PERFORMER

Fork lift trucks - braking and load systems.
Truck mounted cranes - load safety systems.
Earth moving machinery - hydraulic gearbox control.
Racing car - gearbox, fuel, cooling and suspension systems.
Earth moving machinery - hydraulic gearbox control.
Water usage systems - pressurised systems for industrial and hi-rise usage.
Forest Machinery - felling and logging.
Paper mills - speed control and weighing systems.

The Parker Filtration ASIC Performer Pressure Transducers and Transmitters.

To overcome the historical problems caused by “gauge creep”
of thick film sensors and the fragility of peizo-electric/ceramic
based sensors, the new ‘Performer’ range uses a high-grade
Stainless Steel element, which is coated with layers of both
insulative and alloy materials. These are trimmed to a very
close tolerance using state of the art, semiconductor grade,
laser and lon beam methods.This extremely accurate “front
end” is then coupled with Application Specific Integrated
Circuitry (ASIC) to produce a sensor that is both accurate

and repeatable over a wide, fully compensated, temperature
range, -40°C to +125°C. The “Performer” is now available in a
variety of thread-form and connector options.

This new design offers a high stability, very low drift device,
which can operate over a wide thermal range.Powered from
an extended working supply range (9-35vdc {PTD} and
11-35vdc {PTX}).

Exploded view
of the ASIC

Performers

threaded head

In addition to the
standard 6 pressure
ranges available, using
the ASIC technology
(Application Specific
Integrated Circuit)
programmable software,
any variation can be
manufactured.Consult
Parker for any additional
information.

A comprehensive range of Pressure Transducers
and Transmitters are available from Parker
Filtration.

One-piece body and diaphragm machining
ensures long-term product stability.

All Stainless Steel construction.
6 Transducer pressure ratings, 0-5V and 1-6V outputs.
6 Transmitter pressure ratings - 2-wire 4-20mA output.
Micro plug and M12 connector options.

ASIC ‘Performer’

Pressure Transducers and Transmitters

SPECIFICATION

Pressure ranges:

20, 60, 100, 250, 400, 700 Bar.

Minimum over pressure:

Rated pressure times 1.5min

Minimum burst pressure:

Rated pressure times 6 min

Vibration:

>50g

Installation:

Spanner size 22A/F.
Max. (recommended)

tightening torque = 30Nm

ELECTRICAL

Supply voltage Output

9 - 35v DC 0 - 5v
9 - 35v DC 1 - 6v
11- 35v DC 4 - 20mA

Transducer current draw = 8mA

THREAD FORM OPTIONS

G1/4(1/4BSP) for bonded seal
G1/4(1/4BSP) with integral

seal
M12 x 1.5-6g

7

/16UNF (37° Flare to SAE

J514, size 4)

LINEARITY, HYSTERESIS, REPEATABILITY,
RESPONSE AND TEMPERATURE

Linearity:

(over any 80°C temp range)
<+/-0.05%

Hysteresis:

(over any 80°C temp range)
<+/-0.05% Full Scale

Repeatability:

(over any 80°C temp range)
<+/-0.05% Full Scale

Initial Calibration Accuracy:

WIRING INFORMATION

+/- 1% Zero
+/- 1% Span

Micro DIN Option M12 Option

9

/16UNF (37° Flare to SAE

J514, size 6)
NPTF1/4(ANSI B1.20 3-1976)

1

NPTF

/8(ANSI B1.20 3-1976)

All thread forms and sensor
interface are made from17­4PH Stainless Steel

Functional Temp Range:

-40°C to +125°C

Temperature error:

(over any 80˚C temp range)
<1%

Stability:

<0.1%FS after 1m Cycles

Response Time:

<1mS

4

12

12

Pin Number

1
2
4

Micro DIN Option

Transmitter

N/A

Supply +ve

Return

Transducer

Signal Output

Supply +ve

Supply Ref (0v)

Pin Number

1
2
3
4

M12 Option

Transmitter

Supply +ve

Return

N/A
N/A

INSTALLATION DETAILS

Micro DIN option M12 option Flying lead option

26.5

M12 THREAD

34

Transducer

Supply +ve

Supply Ref (0v)

Signal Output

Not Used

Ø19.0

26.5

22.0 A/F

47.5

Ø19.0

53.0

26.5

48.0

22.0 A/F

ASIC ‘Performer’

Pressure Transducers and Transmitters

PREFERRED PRODUCTS TABLE

Pressure Transducers

Part Number

PTD.SB0201A1C1
PTD.SB0601A1C1
PTD.SB1001A1C1
PTD.SB2501A1C1
PTD.SB4001A1C1
PTD.SB7001A1C1
PTD.SB0201A1C2
PTD.SB0601A1C2
PTD.SB1001A1C2
PTD.SB2501A1C2
PTD.SB4001A1C2
PTD.SB7001A1C2

Pressure Transmitters

Part Number

PTX.B0201A1C1
PTX.B0601A1C1
PTX.B1001A1C1
PTX.B2501A1C1
PTX.B4001A1C1
PTX.B7001A1C1
PTX.B0201A1C2
PTX.B0601A1C2
PTX.B1001A1C2
PTX.B2501A1C2
PTX.B4001A1C2
PTX.B7001A1C2

Note 1: For a flying lead assembly, select the appropriate M12 option above and add a suitable cable from the “Associated

Products” options below.

Example: PTX.B2505A1C2 + P.833PVC-2M = A 250 bar 4-20mA Transmitter, G1/4 for bonded seal, M12 connector with

2m PVC flying lead.

Note 2: Integral Thread options are also available in the above ranges.

Description

0-20 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-60 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-100 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-250 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-400 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-700 bar transducer. (G1/4'' BSP) 1-6Vdc output. Micro DIN option.
0-20 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-60 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-100 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-250 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-400 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.
0-700 bar transducer. (G1/4'' BSP) 1-6Vdc output. M12 Option.

Description

0-20 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.

1

0-60 bar transmitter. (G

/4'' BSP) 4-20mA. Micro DIN option.
0-100 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-250 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-400 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.
0-700 bar transmitter. (G1/4'' BSP) 4-20mA. Micro DIN option.

1

0-20 bar transmitter. (G

/4'' BSP) 4-20mA. M12 option.
0-60 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-100 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-250 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.
0-400 bar transmitter. (G1/4'' BSP) 4-20mA. M12 option.

1

0-700 bar transmitter. (G

/4'' BSP) 4-20mA. M12 option.

PTD

Pressure Transducer
(Voltage Output)

O/P Combination

1 - 6 V
0 - 5 V

0.5 - 4.5 V Ratiometric

0.1 - 4.9 V

Pressure Measurement

Bar B

Pressure Range - Bar

0 to 20
0 to 60
0 to 100
0 to 250
0 to 400
0 to 700

020
060
100
250
400
700

Pressure Transducers (PTD)

S
V

R
P

M12 (IP68) Moulded Cable Options

2 Metre PVC
5 Metre PVC
10 Metre PVC

G1/4 (1/4BSPP)for bonded Seal
G1/4 (1/4 BSPP)

R1/4 (1/4 BSPT)

1

1

7/16 - 20 UNF
M12 x 1.5 Pitch with Spigot

Associated Products

A1

Connector Types

Micro Din 43650
M12

Primary Thread Forms

+ Integral Seal

Secondary Thread Forms

/4 NPT
/8 NPT

P.833PVC-2M
P.833PVC-5M
P.833PVC-10M

Pressure Transmitter
(4-20 mA Product)

C1
C2

Bar B

1
2

0 to 20
0 to 60

3

0 to 100

4

0 to 250

5

0 to 400

6

0 to 700

7

2 Metre PVC
5 Metre PVC
10 Metre PVC

Pressure Transmitters (PTX)

PTX

Pressure Measurement

Pressure Range - Bar

020
060
100
250
400
700

Associated Products

M12 (IP68) Moulded Cable Options

P.833PVC-2M
P.833PVC-5M
P.833PVC-10M

A1

Connector Types

Micro Din 43650
M12

Primary Thread Form

1

/4 (1/4BSPP)for bonded Seal

G
G1/4 (1/4 BSPP) + Integral Seal

Secondary Thread Forms

R1/4 (1/4 BSPT)

1

/4 NPT

1

/8 NPT

7

/16 - 20 UNF

M12 x 1.5 Pitch with Spigot

C1
C2

1
2

3
4
5
6
7

Parker Hannifin UK Ltd

Filter Division Europe

Condition Monitoring Centre

Brunel Way, Thetford

Norfolk, IP24 1HP, UK

Phone: [phone]

Fax: [phone]

www.ucc.co.uk