Park Audio II DX1000MB Owner's Manual
OWNER’S MANUAL
PARK AUDIO II
www.parkaudio2.com
AVIS
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
CAUTION! The amplifier runs on 230 V AC voltage. Removing the cover will expose you
to a potentially dangerous voltage! Do not use the unit if the electrical power cord is frayed
or broken. Power is supplied from 230 V AC single-phase grounded 50/60 Hz source!
CAUTION! The amplifier can yield dangerous output voltage! Do not install an energized
unit into the speaker system. Do not touch the non-insulated cable parts connected to the
unit in operation!
CAUTION! The high sound pressure level of speaker systems generated by high output
power delivered by the amplifier may be hazardous to your hearing. Please, take adequate
safety precautions.
WARNING! The amplifier yields high output power. The manufacturer shall not be held
responsible for any damage to the speakers caused by excessive power from the unit.
WARNING SIGNS:
Important information! Intended to alert the user of the presence of
important operating and maintenance (servicing) instructions in the Owner’s
Manual accompanying the product.
Hazardous voltage inside! Intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
INTRODUCTION
DX1000MB built-in power amplifier is intended for use in LF speaker systems
(subwoofers).
UNPACKING
The manufacturer’s quality control system provides for careful examination of each
product before it leaves the factory to ensure its flawless appearance. After unpacking,
please, check the unit for any physical damage. In case of damage, please, contact our local
dealer. Keep the shipping carton and all packing material, as you may require them for reshipment of the unit.
12
DIMENSIONS
ACCESSORIES
1. Power cord 1 ea.
2. Owner’s Manual 1 ea.
3. Warranty 1 ea.
139
8
27
252.5
364.5
391.5
407.5
91
8
182
198
1527 max
156 max
24260.516361.5366 ma
x
102
2
Loading...