Parish Supply 1000DX-200 Speedster, 1005DX Speedster, 1001D-200 Speedster, 1003DX Speedster Instruction Manual
Instructions for
1000DX-200,1001DX-200,
1003DX, 1005DX Speedster
Please read before use.
Register your product
at http://www.mytee.
com/support/register
®
1000DX-200 p.3
1001DX-200 p.9
1003DX p.15
1005DX p.21
General information p.27
Model #
Serial #
Form # ADP-Speedster
5-14
1
2
1000DX-200 SPEEDSTER
1000DX-200 SPEEDSTER
®
BACK1000DX-200 SPEEDSTER® FRONT
1
2
3
4
5
1. Switch plate
2. Easy faucet ll
3. Solution tank lid
4. Front handle
5. Front vent
10
9
8
7
6
6. 5” locking casters
7. Solution tank
8. Female quick disconnect
9. 2” Male Cuff-Lynx™
10. Recovery lid
11
11. Recovery tank
12. Push handle
13. Drain valve
14. Power cord
15. Back vent
12
13
14
15
16
16. 12” Rear wheels
1000DX-200 SPEEDSTER® ITEMS INCLUDED
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” Hose Adapter 2” Hose Reducer to 1.5”
H375- Hose Hanger H226 Drain Elbow
(4) screws
1000DX-200 SPEEDSTER® CORD
Plug the power cord into a single, 20A grounded wall outlet.
3
1000DX-200 SPEEDSTER
1000DX-200 SPEEDSTER® VAC/SOL
HOSE CONNECTIONS
1000DX-200 SPEEDSTER
®
SWITCHES
the other end to the Speedster’s® front quick disconnect.
Attach one end of a vacuum hose to the tool, the other end
to the Speedster’s® Cuff-Lynx™ vacuum hose port.
1000DX-200 SPEEDSTER® FILL SOLUTION TANK
Turn on Vac 1, Vac 2 and Pump switches.Attach one end of a solution hose to a wand or other tool,
1000DX-200 SPEEDSTER® FLOAT SWITCH
Lift lid and manually ll the solution tank or use the easy
faucet ll.
The Speedster® is equipped with an electronic oat switch
inside the recovery tank. The recovery oat switch is activated by rising water to prevent suction into the vacuum
stacks damaging the motors.
4
1000DX-200 SPEEDSTER
1000DX-200 SPEEDSTER® DUMP VALVE
Attach the 45˚ drain elbow to the drain spout in back. Lift up
the dump valve and empty the tank.
1000DX-200 SPEEDSTER
®
FILTER MAINTENANCE
VACUUM
STACK
FILTER
INTAKE
FILTER
Check and clean the vacuum stack lters and solution
tank lter daily by twisting off, rinsing with clean water and
replacing.
1000DX-200 SPEEDSTER
®
LOCKING CASTERS
Locking casters help keep the machine remain stationary
during use.
MYTEE® SYSTEM MAINTAINER
Weekly ushing of the solution system with Mytee® System
Maintainer helps keep lines clean and prevents chemical
build-up, improving pump life, performance and pressure.
5
1000DX-200 SPEEDSTER PARTS & PRICING
F
1
2
E
D
C
B
A
PRODUCTS, INC.
858-679-1191
speedster
mytee
TITLE:
DATE
10/2013
NAME
M. LaBarbera
PROPRIETARY AND CONFIDENTIAL
COMMENTS:
CHECKED
DRAWN
C
REV
SHEET 1 OF 3
1
DO NOT
SCALE DRAWING
1000DX-200
DWG. NO.
C
SCALE: 1:48
SIZE
2
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
3
4
5
6
MSRP
QTY.
DESCRIPTION
PART NO.
NO.
ITEM
MSRP
QTY.
$1.99 ea
$8.99 ea
1
bracket, front hinge, sp/fb
$3.19 ea
$6.49 ea
$2.49 ea
1
1
1
1
lter, strainer, 1/2"
spout, drain, 45 degree
nipple, brass, 3/8" x close
$20.99 ea
$190.99 ea
1
valve, drain, 1-1/2" 1
vac tank, speedster
bushing, brass, 1/2"mpt x 3/8" fpt, hex
B210
B216
P733
H226
58
59
$2.99 ea
$0.99 ea
3
2
H225
60
61
$0.99 ea
$94.99 ea
1
8
62
$0.99 ea
10
H378
B119A
56
57
$0.99 ea
$21.49 ea
1
12
$4.99/ft
$4.99/ft
$5.00 ea
$1.99 ea
2
nut, lock, 1-1/2", steel
H314
63
$0.99 ea
22
$4.99 ea
4
2
2
2
pipe, pvc, 1-1/2"
pipe, pvc, 1-1/2"
adapter, 1.5" pvc, fslip x fslip
screen, mesh lter, 1-1/2" dia
P502
G097
PH633-4
PH633-03
65
66
67
64
$0.99 ea
$9.99 ea
$0.99 ea
$23.19 ea
2
1
4
$4.99 ft
$2.99 ea
$3.29 ea
$2.99 ea
$0.99 ea
$11.99 ea
$36.99 ea
2
2
4
2
1
1
6
pipe, pvc, 1-1/2"
lter, foam, 2-3/8" x 1"
gasket, 7", vac lid
screw, #8 x 5/8 phil oval, s/s
adapter, 1.5" pvc, 45 deg, fslip x fslip
adapter, pvc, 1-1/2" mpt x 1-1/2" fms
P503
P520
G022
PH633-1
68
69
$0.99 ea
$41.99 ea
2
2
G090 lid, vac tank, clear, 7"
70
71
72
$1.99 ea
$3.19 ea
$11.49 ea
1
1
1
H304
G091
73
74
$0.99 ea
$141.99 ea
1
6
$2.49 ea
$1.99 ea
$0.99 ea
$3.99 ea
$15.99 ea
$13.99 ea
1
1
1
3
1
plug
gasket, 2" inlet
elbow, inlet assembly 2"
switch, rocker, 2 position
Cu-Lynx, 2" m cu x 2" mpt
screw, 10-32 x 1/2" SHCS, alloy 3
E515
H135
77
78
$3.49 ea
$8.99 ea
1
1
H389
P967A
79
80
$4.99 ea
$35.49 ea
1
A926
G083
75
76
$8.99/ft
1
$1.99 ea
4
$0.99 ea
$6.99 ea
$1.99 ea
$0.99 ea
$5.99 ea
$6.99 ea
$2.99 ea
$13.99 ea
3
1
1
1
1
1
2
4
nut, 1/4" npt
Washer, #8, at regular
plate, switch, 1000DX-200
B156
H612
H348
81
82
83
$3.19 ea
$0.99 ea
$0.99 ea
1
4
bracket, "L"
plastite screw, 1/4 x 1"
elbow, brass, 90 deg, 1/4" fpt x 1/4" fpt
level switch, vacuum shut-o, rear threads
at washer, 9/16"ID x 1 1/16"OD, AN960-C916
E373
B207
H212
84
$208.99 ea
1
85
86
$9.49 ea
$9.99 ea
1
1
H034
H390A
87
88
$0.99 ea
$0.99 ea
4
2
$0.99 ea
$3.99 ea
$8.99 ea
$139.99 ea
6
6
2
2
vac motor, 3 stage, low amp
gasket, vac motor - Speedster
bolt, hex, 1/4-20 x 4", zinc Finish
vac support, 3 stage, 3.25", no thrds
H096
H503
G004
C302LA
89
90
91
92
$3.99 ea
$10.00 ea
2
2
$8.99/ft
$1.49 ea
4
1
$0.99 ea
$0.99 ea
2
10
$1.99 ea
$0.99 ea
6
6
MSRP
$6.29 pak
1
QTY
piglet lter
DESCRIPTION
G008
PART NO.
ITEMS NOT SHOWN
$0.99 ea
$12.99 ea
$141.99 ea
1
1
2
$3.19 ea
3
$10.99 ea
1
$3.99 ea
$3.99 ea
$0.99 ea
$4.99 ea
$10.99 ea
1
1
hanger, wire formed, hose
gasket, strip, 3/4" x 36" x 1/8"
H375
G085
$4.99 ea
$0.99 ea
$4.49 ea
1
4
1
$74.99 ea
1
1
1
2
Cu-Lynx, 2" x 1.5" reducer
power cord, ext 50', 12/3 black
screw, 10-32 x 1/2" phil pan head, s/s
Cu-Lynx, 2" hose x 2" fem swivel Cu-Lynx
E530
H110
H230
H141
$1.99 ea
$5.49 ea
$13.49 ea
$17.99 ea
1
1
1
$6.49 ft
1
3
4
5
6
$6.99 ea
1
7
wheel, 12"
axle, 18.25" x .50" dia
nut, lock, 1/2" steel
washer, axle, cut 1/2" id
tting, strain relief, cord
caster, 5", Black hub & gray tread
H666
H371
H254
H251
H219 cap, axle, 1/2"
H221
H220
10
11
12
13
14
15
16
E
8
DESCRIPTION
fan, cooling, 115V
guard, cooling fan, wire
screw, #10 x 5/8" hex head, zinc
H343
H296
C317
PART NO.
1
2
3
NO.
ITEM
washer, 1/4" at, s/s
nut, kep, #10-32 zinc
bolt, 1/4-20 x 1" hex head, s/s 8
nut, lock, 1/4-20, nylon insert, s/s
screw, 10-32 x 3/4, phil at full thread
controller, water level, dual pump or vac
E370
H186
H273
H216
H210
H342
4
5
6
7
8
9
F
base, speedster
sol hose, 1/2" kuri 100psi
clamp, hose, 5/16-29/32
bolt, 1/4-20 x 3/4" hex head, s/s
power cord, pigtail, 30", 12/3, black
E550
P731
H202
PH615-26
17
18
19
20
sol hose, 28" x 1/4", 1/4 fpt 1
elbow, brass, 90 deg, 3/8"mpt x 3/8" fmpt
adapter, brass, 1/2" barb x 3/8" fsw, ball end
B160
B186
H347
AH120
21
22
23
24
D
bracket, rear, fb/spy
bushing, brass, 3/8"mpt x 1/4"
pump, 220psi, diaphragm,115V
washer, 11/16"id x 1-1/2"od x .075, s/s
screw, 10-32 x 1-1/4" phil pan head, s/s 4
elbow, brass, 90 deg, 1/4" mpt x 1/4" mpt
B136
B105
H299
H222
C322D
27
28
25
29
26
washer, star, 1/4" steel zinc
washer, buna 1-1/8" od x 3/16" id
elbow, brass, 90 deg, 1/2" barb x 3/8"mpt
bolt, 1/4-20 x 1/2" serrated hex ange, zinc
B172
H912
H770
H307
G052
31
32
33
30
34
C
6
nut, hex, 1/4-20 s/s
washer, 1/4" lock, s/s
clamp, hose, 2-1/4 dia
washer, 1/4"id x 1"od, at, s/s
H211
35
vac hose, 2", wire reinforced
coupler, 2" dia x 2.5" length, s/s
Cu-Lynx, 2" mpt x 2" female cu
H124
H194
H217
H213
H215
PH628-24
36
37
38
39
40
41
faucet ll
sol tank, speedster
cover, sol tank (sp)
P732
H178
G018
42
43
44
B
Part prices are subject to change.Order parts at: www.mytee.com/products/product.php?id=1000DX
ball valve, 1/4'' 1
qd, brass, 1/4" f
tee, brass, 1/4" mpt
plate, mounting, QD
nipple, brass, 1/4"m, hex
coupling, brass, 1/4" fpt x 1/4" fpt
screw, 10-32 x 3/4" phil pan head, zinc
bolt, 1/4-20 x 3/4" serrated hex ange, zinc
B107
H768
45
B142
H484
H256
46
47
48
49
adapter, brass, 1/4" barb x 1/4" mpt
B109
B135
B102
B656
PH634-36 sol hose, 1/4", silicone braided, clear
54
53
50
51
52
A
7
handle, breeze and dx
8
H485
55
1000DX-200 SPEEDSTER PARTS & PRICING
F
1
2
E
74
73
72
D
77
78
76
6
75
C
79
80
83
81
84
80
46
82
86
85
87
88
71
70
70
62
90
92
91
89
8
40
B
A
PRODUCTS, INC.
858-679-1191
speedster
mytee
TITLE:
DATE
10/2013
NAME
M.LaBarbera
PROPRIETARY AND CONFIDENTIAL
COMMENTS:
CHECKED
DRAWN
C
REV
SHEET 2 OF 3
1
DO NOT
SCALE DRAWING
1000DX-200
DWG. NO.
C
SCALE: 1:48
SIZE
2
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
MYTEE PRODUCTS, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
MYTEE PRODUCTS, INC. IS
PROHIBITED.
69
3
68
65
67
66
64
64
63
61
60
3
51
49
50
48
47
46
20
34
4
35
44
45
52
53
54
46
55
40
8
24
"OUT"
to pump
thru AH120
4
19
56
7
43
42
8
19
57
58
27
59
31
41
5
37
36
6
46
thru B107
to female qd
7
29
6
8
28
26
25
27
40
35
34
37
34
35
19
32
38
32
33
23
"IN"
to pump
thru B186
2
1
30
3
4
5
6
7
8
9
20
10
5
6
7
24
lter thru
to sol tank
8
F
B216
23
21
22
59
E
18
11
12
15
16
17
D
13
14
C
B
A
8
7
1000DX-200 SPEEDSTER WIRING SCHEMATIC
E-515
E-515
G
G
Pump
C-322D
VAC 2
C-302LA
E-515
L2L1
L2L1
relays
N/O
Float
#E-370
Switch
115V
C-317
1000DX-200
Cooling
115 Volt System
G
L1
Fan
L2
G
VAC 1
C-302LA
L2L1
Ground to
Metal Plate
1/24/2014
8
1001DX-200 SPEEDSTER
1001DX-200 SPEEDSTER
®
BACK1001DX-200 SPEEDSTER® FRONT
1
2
3
4
5
1. Switch plate
2. Easy faucet ll
3. Solution tank lid
4. Front handle
5. Front vent
10
9
8
7
6
6. 5” locking casters
7. Solution tank
8. Female quick disconnect
9. 2” Male Cuff-Lynx™
10. Recovery lid
11
16
11. Recovery tank
12. Push handle
13. Drain valve
14. Dual power cords
15. Back vent
12
13
14
15
16. 12” Rear wheels
1001DX-200 SPEEDSTER® ITEMS INCLUDED
H110 Cuff-Lynx™ H141 Cuff-Lynx™
2” Hose Adapter 2” Hose Reducer to 1.5”
H375- Hose Hanger H226 Drain Elbow
(4) screws
1001DX-200 SPEEDSTER® CORDS
Left cord: Powers Vac 2 & Heater 2.
Right cord: Powers Vac 1, Heater 1 & Pump.
Yellow tag
indicates primary
cord.
Plug each power cord into a separate, 20A grounded wall
outlet. Outlets must be on two separate breakers. When
the amber light on the switch plate illuminates, the machine
is on separate circuits (not necessarily 20A circuits). You
can identify the primary cord by the yellow tag.
9
1001DX-200 SPEEDSTER
1001DX-200 SPEEDSTER® VAC/SOL
HOSE CONNECTIONS
Attach one end of a solution hose to a wand or other tool,
the other end to the Speedster’s® front quick disconnect.
Attach one end of a vacuum hose to the tool, the other end
to the Speedster’s® Cuff-Lynx™ vacuum hose port.
1001DX-200 SPEEDSTER® SWITCHES
“On” switches are located on the plate in front of the machine. To use vacuums, turn on Vac 1 and Vac 2 switches.
To use pump, turn on Pump switch. To activate heat, turn
on Heater switch. Heater 1 for 1000 watts of heat. Heater
2 for 2000 watts of heat.
1001DX-200 SPEEDSTER
®
FILL SOLUTION TANK
Lift lid and manually ll the solution tank or use the easy
faucet ll.
1001DX-200 SPEEDSTER
®
FILTER MAINTENANCE
VACUUM
STACK
FILTER
INTAKE
FILTER
Check and clean the vacuum stack lters and solution
tank lter daily by twisting off, rinsing with clean water and
replacing.
10
Loading...