Parasound HCA-1500A User Manual

O W N E R ' S M A N U A L

HCA -1500A High Current Power Amplifier

HCA-1500A High Current Power AmplifierHCA-1500A High Current Power Amplifier

r

e

w

o

Power

P

LUCASFILM

-1-

U

LUCASFILM

L

M

L

I

F

S

A

C

d

a

rlo

ve

t O

n

rre

u

C

Current Overload

R

L

in

L

C

AC Line

A

R

l

a

y

m

b

r

d

o

e

n

Normal

N

a

t

S

Standby

IMPORTANT SAFETY INSTRUCTIONS

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the
presence of “dangerous voltage” within the product’s enclosure that may constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance instructions in the literature accompanying the product.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

1. Read Instructions — Read all the safety and operating instructions before operating this product.

2. Retain Instructions — Retain safety and operating instructions for future reference.

3. Heed Warnings — Adhere to all warnings on the product and in the operating instructions.

4. Follow Instructions — Follow all operating and use instructions.

5. Cleaning — Unplug this product from the wall outlet before cleaning. Use a damp cloth for cleaning.

6. Attachments — Do not use attachments not recommended by the product manufacturer; they may cause hazards.

7. Water and Moisture — Do not use this product near water.

8. Accessories — Do not place this product on an unstable cart or stand. The product may fall causing bodily injury and

damage to the product.

9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may

cause the product and cart combination to overturn.

10. Ventilation — Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the

product and to protect it from overheating. These openings must not be blocked or covered. This product should not

be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

11. Power Sources — Operate this product only from the type of power source indicated on the marking label. If you are

not sure of the type of power supply to your home, consult your dealer or local power company. This product is
equipped with a three-wire grounding type plug. This plug will only fit into a grounding type power outlet. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the grounding type plug.

12. Power Cord Protection — Power supply cords should be routed so that they are not likely to be walked on or pinched

by items placed upon or against them.

13. Lightning— For added protection for this product during a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power
line surges.

14. Overloading — Do not overload wall outlets or extension cords. This can result in a risk of fire or electric shock.

15. Object and Liquid Entry - Never push objects of any kind into this product through openings; they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock.

16. Servicing — Do not attempt to service this product yourself. Opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

17. Damage Requiring Service — Unplug this product from the wall outlet and refer servicing to qualified service

personnel under the following conditions: a) When the power-supply cord or plug is damaged. b) If liquid has been
spilled, or objects have fallen into the product. c) If the product has been exposed to rain or water. d) If the product does
not operate normally by following the operating instructions. e) If the product has been dropped or damaged in any way.
f) When the product exhibits a distinct change in performance.

18. Replacement Parts — When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result
in fire, electric shock, or other hazards.

19. Safety Check — Upon completion of any service or repairs to this product, ask the service technician to perform safety

checks to determine that the product is in proper operating condition.

20. Wall or Ceiling Mounting — Mount the product to a wall or ceiling only as recommended.

21. Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

-2-

HCA-1500A High Current Multi Amplifier

Current Overload Indicators

Power

Power Switch

Figure #1

HCA-1500A Front Panel Drawing

Input Connectors,

Looping Output Connectors,

and Level Controls

Current Overload

LR

StandbyAC Line Normal

Power & Status Indicators

+ 12 Vdc

Trigger Connector

Manufactured under license from LucasArts Entertainment
Company. U.S. and Foreign Patents pending. Lucasfilm THX Audio
and Home THX Symbols are Trademarks of LucasArts Entertainment
Company Lucasfilm is a Trademark of Lucasfilm Ltd.

WARNING:

TO PREVENT FIRE OR SHOCK
HAZARD. DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.

CAUTION:

TO PREVENT ELECTRIC SHOCK,
DO NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Inputs

Mono Bridge

CAUTION:

Speaker Impedance
4 Ω Minimum Stereo
8 Ω Minimum Bridged

StereoTHX

Level

Loop Outputs

LR

Speakers

THX
Level

Speaker Connectors

Figure #2

HCA-1500A Front Panel Drawing

-3-

HCA - 1500A

High Current Power Amplifier

Parasound Products, Inc

San Francisco, CA U.S.A.

DC Trigger

GND+12 V

AC 120 V 60 Hz

Power

6.3 A Fuse

Power Consumption: 700 W

AC Receptacle

Introduction

Congratulations on your purchase of this precision audio component and thank you for your selection of
Parasound. Your HCA-1500A was designed by renowned circuit designer John Curl to meet or surpass
the stringent standards required by Lucasfilm for use in THX Home Cinema systems. Each precision
component within your HCA-1500A is carefully selected for optimum sound quality on even the most
challenging music and film soundtracks.

Parasound amplifiers have greater operational flexibility and power than most other amplifiers you may
have used, so please take a few moments now to read these instructions thoroughly so you may fully
understand the various capabilities of your new Parasound power amplifier.

Unpacking Your Amplifier

Carefully unpack your amplifier and remove all the enclosed accessories including the remote control and
detachable AC cord. Be sure to inspect the unit for any possible shipping damage. If you see any, contact
your Parasound Dealer immediately. Be sure to save both cartons and the packing inserts for future
transport and always pack the inner carton into a protective outer carton before shipment.

Before you proceed, find the serial number located on the rear panel of your unit. Record it here for future
reference. ____________________

Installing and Rack Mounting Your Amplifier

Place your amplifier away from heat sources such as air ducts or radiators. Always mount the amplifier
horizontally and make sure that your cabinet or shelf can support its weight. It is best to provide a separate
shelf for your amplifier rather that stacking it directly above or below your other components.

The HCA-1500A occupies three rack spaces (5 1/4") into a standard 19 inch equipment rack. Be sure to
use heavy duty mounting bolts to and nylon shoulder washers on both sides of the faceplate to avoid
scratching the amplifier’s front panel and prevent ground loops. Call Middle Atlantic Products at
[phone] to obtain information about a wide variety of rack mounting hardware. When mounting
equipment into an equipment rack, it is always a good idea to have someone help support the unit while
you bolt it to the rack rails.

Ventilation Requirements for Your Amplifier

To insure safe and reliable operation, it is very important that the amplifier has plenty of ventilation to
prevent overheating and automatic shut down from its thermal protection circuitry. Please observe the
following ventilation guidelines when installing your Parasound amplifier in a cabinet or other enclosed
area: 1) If you are not using a fan, allow at least six inches on each side and above the amplifier, and do
not close off the front with a cabinet door or panel. 2) If you are enclosing the amplifier within an
equipment cabinet, use a fan to draw in cool air and exhaust warm air. In either case, two vent holes are
required: one for intake and one for exhaust. 3) Do not place the amplifier on carpeting that will obstruct
the air flow into the bottom of the amplifier chassis and heatsinks. 4) Avoid stacking components. If you
do, you must use a fan to circulate the warm air that quickly becomes trapped between them.

-4-