Paramount Fitness DBL05-25 Installation Manual
ELECTRIC FIREPL ACE INSERT
Item#:EF-312-25KIT
Model #: DBL05-2 5
Owner’s Manual
1
YE
AR
W
A
R
l
imit ed
R
Y
T
N
A
& Safety Instructions
* Sa ve t his m anual for f uture reference.
War nin g: D o no t mo ve i nsert while operating.
For customer service, parts
or warranty issues:
e-mail customercare@jrhome.com
R
C
US
2
Read these instructions completely before
beginning installation. Failure to follow them
could cause a heater malfunction resulting in
serious injury and/or property damage.
WARNING: All electric heaters have
!
hot and arcing or sparking parts inside.
Do not use it in areas where gasoline,
paint or flammable liquids are present.
!
WARNING: This electric fireplace is
tested and listed for use only with the
optional accessories listed in these
instructions. Use of optional
accessories not specifically tested for
this electric fireplace could void the
heater warranty and/or result in a
safety hazard.
This electric fireplace meets the
construction and safety standards of H.U.D.
for application in manufactured homes when
installed according to these instructions.
TABLE OF CONTENTS
3
Important Safety Instructions.....................................................
Listing Approvals .....................................................................
Product Dimension Specifications .............................................
Locating Fireplace ..................................................................
Unpacking and Testing Fireplace ..............................................
Installation ............................................................................
Finishing Checklist ..................................................................
Operating Instructions ............................................................
Maintenance
.........................................................................
4
6
7
8
9
10
12
13
15
Troubleshooting......................................................................16
Warranty.................................................................................17
4
IMPORTANT SAFETY INSTRUCTIONS
1/
Prior to plugging your heater into an electrical outlet,
verify that the circuit breakers for the outlet are on.
The heater may emit a slight, harmless odor when first
2/
used. This odor is normal and it is caused by the initial
heating of internal heater elements and will not occur
again.
If your heater does not emit heat, consult the operation
3/
section of this manual for further information.
Use with a CSAor UL certified surge protector.
4/
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NO USER-SERVICEABLE PARTS INSIDE
HIGH TEMPERATURE
SA1965 SA1965
KEEP ELECTRICAL CORDS
KEEP DRAPERY AND OTHER FURNISHINGS AT
LEAST 3 FEET (0.9m) FROM THE FRONT AND
SIDES OF THE HEATER.
!
CAUTION: High temperature, risk of fire,
keep electrical cords, drapery,
furnishings, and other combustibles at
least 3 feet (0.9m) from the front of the
heater and away from the side and rear.
!
WARNING: Servicing should be done only
while the heater is disconnected from the
power supply circuit.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT INSTRUCTIONS
When using electric appliances, basic precautions should
always be followed to reduce the risk of fire, electric shock,
and injury to persons, including the following:
1/
Read all instructions before using this heater.
2/
This heater is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces. If provided, use handles when moving
this heater. Keep combustible materials, such as furniture,
pillows, bedding, papers, clothes, and curtains at least 3 feet
(0.9 meters) from the front of the heater and keep them away
from the sides and rear.
3/
Extreme caution is necessary when any heater is used by or
near children or invalids and whenever the heater is left
operating and unattended.
5
4/
Always unplug heater when not in use.
5/
Do not operate any heater with a damaged cord or plug or after
the heater malfunctions, has been dropped or damaged in any
manner. Return heater to authorized service facility for
examination, electrical or mechanical adjustment, or repair.
Do not use outdoors.
6/
7/
This heater is not intended for use in bathrooms, laundry areas
and similar indoor locations. Never locate heater where it may
fall into a bathtub or other water container.
8/
Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or the like.Arrange cord away from traffic area
and where it will not be tipped over.
To disconnect heater, turn controls to off, then remove plug from
9/
outlet.
10/
Connect to properly grounded outlets only.
11/
Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or fire, or
damage the heater
.
6
IMPORTANT SAFETY INSTRUCTIONS
12/
To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces, like a bed, where
openings may become blocked.
13/
A heater has hot and arcing or sparking parts inside. Do not use
it in areas where gasoline, paint, or flammable liquids are used
or stored.
14/
Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, or injury to persons.
15/
Avoid the use of an extension cord because the extension cord
may overheat and cause a risk of fire. However, if you have to
use an extension cord, the cord shall be No.14 AWG minimum
size and rated not less than 1875 watts.
16/
SAVE THESE INSTRUCTIONS
LISTING APPROVALS
This heater has been tested in accordance with the CSAStandards for
fixed and location-dedicated electric room heaters in the United States
and Canada. If you need assistance during installation, please contact
your local dealer.
Model Number:
Description: 25"FireplaceInsert
Voltage: 120VAC
Watts:
Amps:
Width:
Height:
Depth:
Net Weight:
Gross Weight:
DBL05-25
MAX 1500W
15Amp Grounded Circuit
25.39" (645mm)
21.26" (540mm)
9.37" (238mm)
26.43lbs (12kgs)
33.04lbs (15kgs)
Note: This heater
must be
electrically wired
and grounded in
accordance with
local codes or, in
the absence of
local codes, with
National Electric
Code ANSI/NFPA
70-latest edition
or the Canadian
Electric Code,
CSA C22.1 as
appropriate.
Loading...