Paramount Fitness BM10 Installation & Operation Manual

1

BM10 Planetary Mixer

INSTALLATION / OPERATION

MANUAL

F26290-4

2

The reproduction or copying of any part of this manual by any means whatsoever is strictly forbidden unless authorized previously in
writing by the manufacturer.

In line with policy to continually develop and improve its products, Moffat Ltd. reserves the right to change the specifications and
design without prior notice.

© Copyright Moffat Ltd. April 2008

WORLD-WIDE BRANCHES

UNITED KINGDOM

Blue Seal
67 Gravelly Business Park
Gravelly Park
Birmingham
West Midlands
B24 8TQ
Ph: [phone]
Fax: [phone]

UNITED STATES

Moffat Inc
3765 Champion Blvd
Winston-Salem
North Carolina 27115
Ph: [phone]
Fax: [phone]

CANADA

Serve Canada
22 Ashwarren Road
Downview
Ontario M3J1Z5
Toll Free:800 263 1455
Ph: [phone]
Fax: [phone]
[e-mail]
www.servecanada.com
www.moffat.com

NEW ZEALAND

Christchurch

Auckland
Moffat Limited Moffat Limited
PO Box 10-001 4 Waipuna Road
16 Osborne Street Mt Wellington
Christchurch Auckland
Ph: [phone] Ph: [phone]
Fax: [phone] Fax: [phone]

AUSTRALIA

Victoria

New South Wales
Moffat Pty Limited Moffat Pty Limited
740 Springvale Road 3/142 James Ruse Drive, Rose Hill
Mulgrave, Melbourne PO Box 913, Smithfield
Victoria 3171 Sydney, N.S.W. 2142
Ph: [phone] Ph: [phone]
Fax: [phone] Fax: [phone]

Western Australia

Queensland
Moffat Pty Limited Moffat Pty Limited
67 Howe Street 30 Prosperity Place
Osbourne Park Geebung, Brisbane
WA 6017 Queensland 4034
Ph: [phone] Ph: [phone]
Fax: [phone] Fax [phone]

1

Introduction............................................................................................ 2

Specifications.......................................................................................... 3

Installation ............................................................................................. 4

Operation ................................................................................................ 5

Cleaning and Maintenance ..................................................................... 8

Competency Checklists ........................................................................... 9

Operations Competency Checklist

Daily Cleaning Competency Checklist

Risk Assessment ...................................................................................12

Replacement Parts List ......................................................................... 13

Wiring Chart.......................................................................................... 14

Date Purchased .......................................................... Serial No.....................................................

Dealer.............................................................................................................................................

Service Agent ..................................................................................................................................

Contents

2

Introduction

Safety Precautions

• Keep hands and clothing away from the bowl and hob attachments when in operation.

• Keep rigid objects away from the bowl and hub attachments when in operation.

• Do not use this machine for any applications other than food processing.

• Use the machine only with the electrical supply specified on the rating plate.

• Disconnect the machine from its power source before carrying out any maintenance.

• Do not disable or remove any of the safety mechanisms included with this machine.

• Do not leave the machine in operation unattended.

• Observe all maintenance and safety inspection schedules.

• Ensure the machine and any accessories / attachments are in stable, upright position before
operating.

• Ensure all safety features of the machine are fitted and operate correctly within the safety
requirements and procedures before operating the machine.

Improper installation, adjustment, alteration, service or maintenance can cause
property damage, injury or death.

Read the installation, operating and maintenance instructions thoroughly before
installing or servicing this equipment. Failure to do so may result in serious injury or
damage.

Introduction

We are confident that you will be delighted with your PARAMOUNT MIXER, and it will become a most
valued appliance in your commercial kitchen.

A new mixer can seem very complex and confusing at first glance. To ensure you receive the utmost
benefit from your new Paramount, there are two important things you can do.

Firstly

Please read the instruction book carefully and follow the directions given. The time taken will be well
spent.

Secondly

If you are unsure of any aspect of the installation, instructions or performance of your oven, contact your
Paramount dealer promptly. In many cases a phone call could answer your question.

The Paramount BM10 is a dependable mixer for kneading and mixing all kinds of dough, egg, cream,
cookies, mayonnaise etc. The mixer works smoothly and reliably. There are 3 speeds and various style
attachments which can be selected to obtain the best results. These are made of alloy aluminum or
they’re of food hygiene standard.

This model Mixer is equipped with a powerful

1

/3 HP motor and strong belt & gear drive design. The gears
are made of hardened alloy steel and a hardened steel worm wheel. A stainless steel safety guard or a
timer is available on all models.

With proper operation and maintenance this mixer will give you years of service, and obtain the best
results.

3

Specifications

Motor

1

/3 HP (0.25kW) powerful, ball bearing, ventilated within mixer enclosure.

Electrical Supply

230-240 Volts AC, 50Hz, 1P+N+E.

Transmission

The gears are constantly mesh in a special lubricant assuring long life; transmission gears are of

heat treated alloy steel, high accurate construction. All bearings are ball bearings. Positive timing
belt drive eliminates slip and speed variation.

Timer

The 15 minute timer will stop the mixer when the desired time has elapsed.

Safety Guard

Stainless steel safety guard smoothly rotates open. Fitted with a limit switch to shut off power

immediately to protect operator.

Dimensions

Model

Bowl

Capacity

Motor Power

Net Weight

(approx.)

Agitator Speed (RPM)

BM10AT 10 litres

1

/3 HP (0.25kW) 62 Kg

Low

112

Med

202

High

400

450 360

630

270

400

4

Unpacking

Immediately after unpacking the mixer, check it for possible shipping damage. If this machine is

found to be damaged after unpacking, save the packaging material and contact the carrier within
one day of delivery.

Location

Place the mixer in its operating location - this should be a sturdy level surface. There should be

adequate space around the mixer for the user to operate the control and install and remove bowls.

Holes are provided in the base to permanently secure the mixer, although this not necessary in

normal installations.

Floor models must be leveled front-back and side-to-side by sliding shims under the legs as

required.

Electrical Connection

The supply cord on this machine is provided with a three-pin 13A fused and earthed plug. It is

imperative that the outlet to which this plug is connected be properly earthed (grounded).

Prior to installation, test the electrical service to assure it agrees with the specifications on the

machine data plate located on the back side of the pedestal.

Permissible voltage fluctuation is ± 10% of nominal voltage.

Components having adjustments protected (e.g. paint sealed) by the manufacturer, are

only allowed to be adjusted by an authorised service agent.

Rotation

To start the motor, push the 'ON' button. The speed selector handle must be at one of the

numbers indicating a speed, not an intermediate rating.

Before installing the mixer, check that the available electrical supply match that
of the mixer as stated on the mixer’s rating plate.

Installation