Parallel Audio Perfomer-100, Live-100, Stage-100, M4000 Operation Manual
Thank you for purchasing this wireless microphone system.
Please take a few moments to read this operating manual to gain a thorough understanding of the function and
operation of both transmitter and receiver.
In the Box
Live-100/Performer-100
IrDA Receiver
Audio Cable Operation Manual
Note: The above specications are subject to change without prior notice.
Important
1. Please make sure that the output DC voltage range of the switching power covers that specied by the receiver
before turning it on.
2. The receiver and transmitter must be the same frequency.
3. The antenna diversity indicator will ash to denote RF signal received aer turning on the transmitter.
4. While speaking to the transmitter, the audio signal indicator will ash to denote signal received.
(plug varies from country to country)
1 Transmitter
(Handheld/Beltpack)
Switching Adaptor
Pair of Antennas
CH:001
VOL:15
PAGE 2 OPERATION MANUAL V1.0
Parts and Functions
1. Power switch
2. IR sensor area
3. Diversity indicator
4. Audio signal indicator
5. LCD display
10. Antenna B socket (TNC)
11. Balanced audio output
12. Unbalanced audio output
6. UP button
7. DOWN button
8. IrDA synchronisation button
9. SET button
Performer-100
Live-100
13. Antenna A socket (TNC)
14. DC in
OPERATION MANUAL V1.0
PAGE 3
Loading...