
Owner’s Manual
For ProStyle Warmer
Warmer Model Numbers:
Prostyle
with Pump
2018 (120v)
2218 (230v)
www.ManufacturedFun.com
Paragon International, Inc. • 731 W. 18th Street P.O. Box 560 • Nevada, IA 50201 USA
Phone (515) 382-8000 • Toll-free (800) 433-0333 • Fax (515) 382-8001 • Email: info@manufacturedfun.com
A505

safety PrecautiOns
Paragon values your continued safety above all else. Please follow
these guidelines when using your equipment to prevent injury and
maximize product performance:
No direct contact to equipment by the
general public should be allowed when
used in food service locations. Only trained
personnel should operate this equipment.
Carefully read any and all instructions before
beginning operation of the equipment.
Always wear safety glasses when servicing
equipment.
Heating elements reaches extreme heat
during operation. To avoid injury, NEVER
touch elements while hot.
Any alterations made to equipment by
anyone other than certied Paragon
personnel will void warranty and may also
create unsafe working conditions. NEVER
make alterations to the equipment.
Machine must be properly grounded to
prevent electrical shock. Do NOT immerse
warmer elements or any other part of this
equipment in water. Doing so may damage
equipment and prevent it from working
p.
properly. Always unplug equipment before
cleaning or servicing to prevent electric shock.
2

electrical requireMents
This product requires a properly-grounded 120 volt supply with a
15 amp circuit. The Paragon Warmers have a current draw of 1.67
amps or 200 watts. (Export voltage is 230VAC)
We recommend your Paragon Warmer be plugged directly into a
dedicated outlet. Extension cords may create a safety hazard and
reduce its performance.
Be sure outlet accepts three (3) prong grounded plug. DO NOT use
a three (3) prong to two (2) prong adapter.
unPacking
Paragon carefully inspects each product during assembly and
after completion to adhere to strict quality guidelines, and packs
it securely to ensure safe delivery to each of our customers. Be
sure to carefully remove all packing material and adhesive before
any operation. Please examine your product to guarantee all
equipment has arrived, complete and in good condition.
If you believe that any
damage may have occurred
during shipment or parts may
be missing, please contact
Paragon immediately for
replacement.
p. 3

I
Our goal is to provide you with the best solutions
to attract customers, expand your business, and
improve your prots. That’s why this product has been
specially-crafted to meet precise specications for
y
Our
• Stainless steel construction has a 200 watt
heating element to keep all of the product
ntroduction
performance, efciency, and output.
P
aragOn
w
arMer
f
eatures
:
warm and fresh for hours.
• Easy to clean surfaces - just wipe with a
damp cloth.
• Adjustable thermostat, and 6’ power cord.
• Perfect for butter.
• 7”W x 7”D x 8.5”H
• Made in the USA
Should you have any questions about your
equipment, or would like to know more about our
other innovative concession equipment and supplies,
please contact us at 1-800-433-0333 or visit us on the
web at ManufacturedFun.com
p. 4

Paragon is proud to be your
partner for Manufactured
Fun!
OPerating instructiOns
1.
Always clean unit thoroughly before each use.
2.
Fill water vessel with 2 cups of water.
3.
Install spacer and product container into water vessel.
4.
Plug cord in, turn on warmer and adjust thermostat. This will
turn on the heating element in the base of the unit and will
keep your product warm and fresh.
5.
Keep the power switch in the off position when the warmer
is empty or not being used.
WARNING: Always turn the POWER switch to OFF when the
machine is not in use.
Warmer Care
It is recommended that the warmer be cleaned out daily using
suitable cleaners that may be used on food service equipment.
• Always make sure the machine is off and unplugged before
cleaning.
NEVER use water on the electrical components in the base.
Thank you for
your purchase and enjoy!
p. 5