Paradyne FrameSaver NP 100, FrameSaver NP 64+, FrameSaver NP 110, FrameSaver NP 120 Installation Quick Reference Manual

FrameSaver® NP

Installation & Quick Reference Guide

FrameSaver NP Models 64+, 100, 110 and 120

Document Number 980-000-0272B
August 2000

This Quick Reference Guide provides an over view on how to inst all a FrameSaver NP
Model 64+, 100, 110 or 120 unit. This includes making the physical connections be­tween the unit, netw ork, DTE device(s), and telephone line. It also tells you ho w to find
more detailed information about your FrameSaver NP.

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the docu­mentation for specific topics and print only what you need, reducing the waste of sur­plus printing. It also helps us provide timely product update information and maintain
competitive prices for our products.

Complete documentation for these products is available at

www.paradyne.com

.

Select Library

→

Technical Manuals →

FrameSaver NP (NetPath) Frame Relay Digital Access Units

Select the appropriate document from the documentation list:

FrameSaver NP 64+ User’s Manual - Installat ion Guide, Publicatio n # 980-001- 0221
FrameSaver NP 100 U s er’s M an ual - Installatio n G u id e , P ub licati o n # 980-001-0210
FrameSaver NP 110 U s er’s M an ual - Installatio n G u id e, P ub l ication # 980-001- 024 0
FrameSaver NP 120 U s er’s M an ual - Installatio n G u id e, P ub l ication # 980-001- 023 0

116

Getting Started

Before installing or starting to use the FrameSaver NP, you shou ld:

•

Install the User’s Manual - Installation Guide so that you can access all the
installation, configuration, and operating information about the unit.

•

Print sections you may want to reference.

User’s Manual - Installation Guide

The manual is in PDF fil e format. Your PC shou ld be using Micros oft Windows 3.1 or
above, and have Adobe Acr obat Reader inst alled for brows ing or printing this manual.

Adobe Acrobat Reader may be obtained free fro m Adobe Systems Incor porated, from
their Web Site at www.adobe.com.

Using Adobe Acrobat Reader

Adobe Acrobat Reader is used just as you would most word processing or text editing
programs. Start Adobe Acrobat Reader and open the file containing the FrameSaver
NP User’s Manual - Installation Guide. You can simply scroll through the pages, or
use the Bookmarks along the left side to move around the manual or the tables in the
front of the manual.

To print the manual or a selection of pages, select Print... from the F

ile menu and then

select the range of pages you wish to print. Select OK to begin printing.

Ordering a Hard Copy of the User’s Manual

Contact Paradyne Corporation at the address on the back of this Guide to ob tain a print­ed copy of a FrameSa ver NP User’s Manual - Installation Guide. Always specify the
“latest revision” for each publication number:

Safety Instructions

Before proceeding with the installation, carefully rea d the Equipment I nterference No­tice, Important Safety Instructions and Preface s ections of the FrameSaver NP User’s
Manual - Installation Guide.

Contact your service representative, distr ibutor or s ales repres entative to ord er cables .

T1 or DSX network cable, RJ-48, twisted pair 135-982-0006
Dial Line (POTS) cable, RJ-11 connector 135-007-7200
ISDN BRI network cable, RJ-49 connector 135-981-0006
Console cable (to AUX2), DB-9 connector 135-000-0464
Console cable (to AUX2), D B -25 connector 135-007-0400
AUX Port to router console port cable, DB-25 connector 135-008-0400
AUX Port to Cisco router console port, RJ-45 type connector 135-990-0006

2

Before You Begin

Ensure you have the following:

•

A dedicated, grounded, circuit breaker p rotected power outlet within six feet o f
the FrameSaver NP unit.

•

A suitable location for the unit that is clean, well-lit, ventilate d and free fro m
environmental extremes.

•

One to two feet of clearance for cable connections to the unit.

Package Checklist

Verify that the packaging contains the following:

•

FrameSaver NP unit

•

Unit power cord or AC Power Pack with cord

•

If ordered, optional wall-mount or rack-mount bracket assembly.

In addition, you will need Input/Output cables if not already supplied. These cables are
listed for each FrameSaver NP Model on pages 13 - 15 of this guide.

Mounting the FrameSaver NP

FrameSaver NP units come equipped with rubber feet for table or shelf-top placemen t.
Optional adapter brackets are available for wall mounting (Model 64+ includes wall­mount key-holes in its base) and standard 19" or 24" rack mounting. To attach and
mount adapter brackets, follow the instructions supplied with the mounting adapters.

Allow sufficient space for cooling and access to the front panel indicators for trouble­shooting in all installations.

Power Up a FrameSaver NP 64+

Make Power Connections

1. Plug the 2-pin keyed and locking connector at the end of the cord from the AC
Power Pack into the right-most pins of the 4-pin Power Connector located on the
rear of the FrameSaver NP 64+, just to the right of the alert marking.

CAUTION

The power connectors are keyed and fit easily together
when oriented correctly with the locking clip toward the
top of the unit. Do not force the connectors together.

CAUTION

The 2-pin keyed plug fits easily into the two RIGHT-SIDE pins of the 4-pin
Power Connector, and must only be inserted there. The FrameSaver NP
unit will be damaged if the plug is forced into the other side.

Contact your service representative, distr ibutor or s ales repres entative to ord er cables .

DATA PORT

SEE

USERS

MANUAL

POWER

PAC

O
N

1234 5 6 7 8 9 101112

DLCI

x1x100 x10

DIGITS

2-Pin

Connector

from

Power Pack

Plug into RIGHT side

Pins ONLY

Blocking Safety Plug

(Remove only when insta lling optional

Power Control Unit)

DDS network cable, RJ-48, twisted pair 135-982-0006
Dial Line (POTS) cable, RJ-11 connector 135-007-7200
ISDN BRI network cable, RJ-49 connector 135-981-0006
EIA-232 Data Port (DTE) cable 135-000-0400
EIA-530 Data Port (DTE) cable 135-002-0400
EIA-530A Data Port (DTE) cable 135-003-0400
ITU-X.21-NS Data Port (DTE) cable 135-005-0400
ITU-V.35 Data Port (DTE) cable 135-001-0400
ITU-V.35 Data Port (DTE) cable to Cisco router serial port,

HD-60 connector
Console cable (to AUX2), DB-9 connector 135-000-0464
Console cable (to AUX2), D B -25 connector 135-007-0400
AUX Port to router console port cable, DB-25 connector 135-008-0400
AUX Port to Cisco router console port, RJ-45 type connector 135-990-0006

2. Plug the Power Pac at the other end of the power cord into an AC outlet.

3. The unit will go through the following power-up sequence:

FrameSaver NP 64+ Power-Up Sequence

If the LED indicat ions ar e not as describ ed above , ref er to S ection 5, “Diag nostics” of
the FrameSaver NP 64+ User’s Manual - Installation Gu ide.

If operation l ooks normal, u nplug the FrameSaver NP befo re making inpu t/output con ­nections.

If an optional Power Control Unit (PCU) is to be installed with this FrameSaver NP,
refer to the instructions provided with the PCU and install it now.

Proceed to Making Network and Input/Output Connections on page 9 of this guide.

Basic FrameSaver NP 64+ FrameSaver NP 64+ with ISDN

POWER LED l ights and stays on.

READY LED may flash several times,
then remain OFF during self-test
(approxi mately 45 seconds).

READY and ISDN READY LEDs
may flash several times, then remain
OFF during self-test (approximately 45
seconds).

READY LED is ON steady after
completion of self-test.

READY and ISDN READY LEDs are
ON steady after completion of self-test.

The DDS ALARM and FR MGMT. LEDs should not be flashing together.
All other LED indications should be ignored at this time.

512

Power Up a FrameSaver NP 100

Power Connections

1. Plug the IEC 320 end of the Power Cord into the connector on the rear of the
FrameSaver NP.

2. Plug the other end of the
Power Cord into an AC outlet.

3. The unit will go through the following power-up sequence

FrameSaver NP 100 Power-Up Sequence

If the LED indicat ions ar e not as de scribed above, r efer to Secti on 5, “Diagno stics ” of
the FrameSaver NP 100 User’s Manual - Installation Guide. If operation looks nor-
mal, unplug the FrameSaver NP before making input/output connections.

If an optional Power Control Unit (PCU) is to be installed with this FrameSaver NP,
refer to instructions provided with the PCU and inst all it now.

Proceed to Making Network and Input/Output Connections on page 9 of this guide.

FrameSaver NP 100 (120) Specifications

Basic FrameSaver NP 100 FrameSaver NP 100 with ISDN

POWER LED lights and stays on.

READY LED flashes during self-test
(approximately 60 seconds).

READY and ISDN READY LEDs
flash during self-tes t (approximately 60
seconds).

READY LED is ON steady after
completion of self-test.

READY and ISDN READY LEDs are
ON steady after completion of self-test.

The T1 ALARM and FR MGMT. LEDs should not be flashing together.
All other LED indications should be ignored at this time.

DATA PO

R

CONFIGURATIO N

O
N

123456789101112

O
N

12

FUSE

2A/250V

SLOW BLO W

5x20mm

90-250 VAC

.5A

50-60 Hz

CONTROL

OUTPUT

FOR CONTINUED PROTECT ION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE AND RAT ING OF FUSE.

"CAUT ION "

Item Description

Dimensions Table Top (with rubber feet):

Weight As normally packaged including carton and accessories: 8 lbs.

Operating
Range

Power
Requirements

Regulatory
Compliance

6 11

AC Power Connector
IEC 320 (mal e)

Power Up a FrameSaver NP 110

Power Connections

1. Plug the IEC 320 end of the Power Cord into the connector on the rear of the
FrameSaver NP 120.

2. Plug the other end of the Powe r
Cord into an AC outlet.

3. The unit will go through the following power-up sequence

FrameSaver NP 110 Power-Up Sequence

If the LED indicat ions ar e not as describ ed above , ref er to S ection 5, “Diag nostics” of
the FrameSaver NP 110 User’s Manual - Installation Guide. If operation looks nor-
mal, unplug the FrameSaver NP before making input/output connections.

If the unit is to su pply switched power to an other device, plug that dev ice’s power cord
into the Switched AC Out connector now.

Proceed to Making Network and Input/Output Connections on page 9 of this guide.

Basic FrameSaver NP 110 FrameSaver NP 1 10 with ISDN

UNIT POWER LED lights and stays on.

UNIT READY LED flashes during
self-test (approximately 60 seconds).

UNIT READY and ISDN READY
LEDs flash during self-test
(approxi mately 60 seconds).

UNIT READY LED is ON steady after
completion of self-test.

UNIT READY and ISDN READY
LEDs are ON steady after completion
of self-test.

NETW ALARM and UNIT FRM MGMT LEDs should not be flashing together.
All other LED indications should be ignored at this time.

USER PORT

FUSE

5A/250V

SLOW BLOW

5x20mm

100-240 VAC

5A

50-60 Hz

O
N

12

FOR CONTINUED

PROTECTION

AGAINST RISK

OF FIRE,

REPLACE ONLY

WITH S AM E TYP E

AND RATING

OF FUSE.

"CAUT ION"

SWITCHED

AC OUT
250VAC

4.5A MAX

1 2

7

AC Power Connector
IEC 320 (male)

Power Up a FrameSaver NP 120

Power Connections

1. Plug the IEC 320 end of the Power Cord into the connector on the rear of the
FrameSaver NP.

2. Plug the other end of the Power
Cord into an AC outlet.

3. The unit will go through the following power-up sequence

FrameSaver NP 120 Power-Up Sequence

If the LED indicat ions ar e not as de scribed above, r efer to Secti on 5, “Diagno stics ” of
the FrameSaver NP 120 User’s Manual - Installation Guide. If operation looks nor-
mal, unplug the FrameSaver NP before making input/output connections.

If an optional Power Control Unit (PCU) is to be installed with this FrameSaver NP,
refer to instructions provided with the PCU and inst all it now.

Proceed to Making Network and Input/Output Connections on the next page of this
guide.

Making Network and Input/Output Connections

Be sure you remove AC power from the FrameSaver NP
before attaching input and output cables.

All connectors are located on the FrameSaver NP’s rear panel.
Make all the necessary connections using the cables listed for that model.

Use caution when connecting to an AUX Port. AUX Port
connectors are similar to the Network connectors.
Accidental connection of either of the AUX Ports to a
Network facility may damage the AUX Port electrical
interface.

NOTES:

1. FrameSaver NP 64+, 100, and 120 Data and User Ports support numerous
electrical interface types; ITU-V.35, EIA-530, EIA-530-A, ITU-X.21-NS and
EIA-232 (FrameSaver NP 64+ only). The Data Port connector is a DB-44 high
density female. The adapter cables listed for each model are used to convert from
the DB-44 to the appropria te connector typ e for the in terface selected. Th e adapter
cable also includes a special wiring pattern at the DB-44 connector, which
automatically sets the port to the desired interface type. Refer to the tables on
pages 13 - 15 of this guide for cable ordering information if necessary.

2. FrameSaver NP 110 User and Data Ports are configured for ITU-V.35 Interface.

3. FrameSaver NP 120 is designed for use in networks where it is not directly
connected to the local PTT’s (non-U.S.) facilities. All the Network connections are
made to the customer’s Private Network.

Making ISDN Option Connections

FrameSaver NP units equipped with optional ISDN adapters have additional connec-
tors on the rear panel for ISDN Li ne(s) and ISDN Data Port (DTE). The ISD N Data
Port supports the same electrical interface types and uses the same connector as the
base unit Data Port.

FrameSaver NP 120

POWER LED lights and stays on.
READY LED flashes during self-test (approximately 30 seconds).
READY LED is ON steady after completion of self-test.
The NETWORK ALARM and FR MGMT . LEDs should not be flashin g together.

Refer to User’s Manual - Installation Guide if they are.
All other LED indications should be ignored at this time.

USER POR

CONFIGURATIO N

O
N

1234 5 6 7 8 910 1112

O
N

12

CONTROL

OUTPUT

FUSE

2A/250V

SLOW BLOW

5x20mm

100-240 VAC

.5A

50-60 Hz

FOR CONTINUED PROTECTION AGAINST

RISK OF FIRE, REPLACE ONLY WITH

SAME TYPE AND RATING OF FUSE.

"CAUTIO N"

8

AC Power Connector

IEC 320 (male)

Making Network and Input/Output Connections

CAUTION

Be sure you remove AC power from the FrameSaver NP
before attaching input and output cables.

All connectors are located on the FrameSaver NP’s rear panel.
Make all the necessary connections using the cables listed for that model.

CAUTION

Use caution when connecting to an AUX Port. AUX Port
connectors are similar to the Network connectors.
Accidental connection of either of the AUX Ports to a
Network facility may damage the AUX Port electrical
interface.

NOTES:

1. FrameSaver NP 64+, 100, and 120 Data and User Ports support numerous
electrical interface types; ITU-V.35, EIA-530, EIA-530-A, ITU-X.21-NS and
EIA-232 (FrameSaver NP 64+ only). The Data Port connector is a DB-44 high
density female. The adapter cables listed for each model are used to convert from
the DB-44 to the appropria te connector typ e for the in terface selected. Th e adapter
cable also includes a special wiring pattern at the DB-44 connector, which
automatically sets the port to the desired interface type. Refer to the tables on
pages 13 - 15 of this guide for cable ordering information if necessary.

2. FrameSaver NP 110 User and Data Ports are configured for ITU-V.35 Interface.

3. FrameSaver NP 120 is designed for use in networks where it is not directly
connected to the local PTT’s (non-U.S.) facilities. All the Network connections are
made to the customer’s Private Network.

Making ISDN Option Connections

FrameSaver NP units equipped with optional ISDN adapters have additional connec­tors on the rear panel for ISDN Li ne(s) and ISDN Data Port (DTE). The ISD N Data
Port supports the same electrical interface types and uses the same connector as the
base unit Data Port.

USER POR

9

Making DROP/DSX Option Connections (FrameSaver NP 110 only)

FrameSaver NP 110 units equipped with optional DROP/DSX adapters have addition­al connectors on the rear panel for the DROP and DSX Ports. The DROP Port supports
the ITU-V.35 interface and the DSX Port is aT1 Network interface.

FrameSaver NP 64+ Specifications

Power Up a FrameSaver NP 110

Power Connections

1. Plug the IEC 320 end of the Power Cord into the connector on the rear of the
FrameSaver NP 120.

2. Plug the other end of the Powe r
Cord into an AC outlet.

3. The unit will go through the following power-up sequence

If the LED indicat ions ar e not as describ ed above , ref er to S ection 5, “Diag nostics” of
the FrameSaver NP 110 User’s Manual - Installation Guide. If operation looks nor-
mal, unplug the FrameSaver NP before making input/output connections.

If the unit is to su pply switched power to an other device, plug that dev ice’s power cord
into the Switched AC Out connector now.

Proceed to Making Network and Input/Output Connections on page 9 of this guide.

Item Description

Dimensi ons Table Top (with rubbe r feet):

3.0" H x 8.5" W x 11.5" D.
Wall Mount (with removable wall mounting bracket):

8.5" H x 11.5" W x 3.0" D.
Rack Mount (with removable rack mounting adapter):

3.5" H x 19.0" W ( or 24.0" W ) x 11.5" D.

Weight As normally packaged including carton and accessories: 6 lbs.

Unit alone (without packaging and accessories): 4 lbs.

Operating
Range

Temperature: 0 to 50 degrees C. operating.
Relative Humidity: 5 to 95% non-condensing.
Altitude: 10,000 ft. max. operating,
50,000 ft. max. non-operating.
Shock and Vibration: As normally encountered during
shipping and handling.

Power
Requirements

AC Power Pack (transformer/plug module).
Input = 90 - 130 VAC, 0.2 A max., 60 Hz.
Output = 22 VAC, 30 VA.
Cable: 2-conductor, with 2-pin keyed locking connector,
7 ft. length.

Regulatory
Compliance

UL - 1459, Third Edition and CAN/CSA C22.2 No. 225-M90
FCC Part 15, Class A Digital Device
Canada’s ICES003, Class A Digital Device
FCC Part 68

Basic FrameSaver NP 110 FrameSaver NP 1 10 with ISDN

UNIT READY LED flashes during
self-test (approximately 60 seconds).

UNIT READY LED is ON steady after
completion of self-test.

NETW ALARM and UNIT FRM MGMT LEDs should not be flashing together.
All other LED indications should be ignored at this time.

USER PORT

FUSE

5A/250V

SLOW BLOW

5x20mm

100-240 VAC

5A

50-60 Hz

O
N

12

FOR CONTINUED

PROTECTION

AGAINST RISK

OF FIRE,

REPLACE ONLY

WITH S AM E TYP E

AND RATING

OF FUSE.

"CAUT ION"

SWITCHED

AC OUT
250VAC

4.5A MAX

1 2

10

AC Power Connector
IEC 320 (male)

FrameSaver NP 100 (120) Specifications

DATA PO

R

Item Description

Dimensions Table Top (with rubber feet):

3.5" H x 10.5" W x 12.0"D.
Wall Mount (with removable wall mounting bracket):

10.5" H x 12.0" W x 3.5" D.
Rack Mount (with removable rack mounting adapter):

5.25" H x 19.0" W ( or 24.0" W ) x 12.0" D.

Weight As normally packaged including carton and accessories: 8 lbs.

Unit alone (without packaging and accessories): 6 lbs.

Operating
Range

Temperature: 0 to 50 degrees C. operating.
Relative Humidity: 5 to 95% non-condensing.
Altitude: 10,000 ft. max. operating,
50,000 ft. max. non-operating.
Shock and Vibration: As normally encountered during shipping
and handling.

Power
Requirements

90 - 250 VAC, 50 - 60 Hz.,15 Watts max.
(100 - 240 VAC for FrameSaver NP 120)
Fused - 2A/250V Slow Blow, 5x20mm.

CAUTION:

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE FUSE ONLY WITH THE SAME TYPE AND
RATING.

ATTENTION:

POUR NE PAS COMPROMETTRE LA PROTECTION
CONTRE LE RISQUE D’INCENDIE REMPLACER PAR UN
FUSIBLE DE MEMES TYPE ET CARACTERISTIQUE
NOMINALES.

Regulatory
Compliance

FrameSaver NP 100

: UL - 1459, Third Edition and CAN/CSA
C22.2 No. 225-M90; FCC Part 15, Class A Digital Device;
FCC part 68;Canada’s ICES003, Class A Digital Device

FrameSaver NP 120

: UL-1950; C AN/CSA C22. 2 No. 2 25- M90;
FCC Part 15, Class B Digital Device; Canada’s ICES003,
Class A Digital Device; EN 60950; EN 50082-1:1992;
EN 55022:1995; EMI: EN 55022 Class B

FrameSaver NP 110 Specifications

2. Plug the Power Pac at the other end of the power cord into an AC outlet.

3. The unit will go through the following power-up sequence:

If the LED indicat ions ar e not as describ ed above , ref er to S ection 5, “Diag nostics” of
the FrameSaver NP 64+ User’s Manual - Installation Gu ide.

If operation l ooks normal, u nplug the FrameSaver NP befo re making inpu t/output con -
nections.

If an optional Power Control Unit (PCU) is to be installed with this FrameSaver NP,
refer to the instructions provided with the PCU and install it now.

Proceed to Making Network and Input/Output Connections on page 9 of this guide.

Item Description

Dimensions Table Top (with rubber feet):

3.5" H x 10.5" W x 12.0"D.
Wall Mount (with removable wall mounting bracket):

10.5" H x 12.0" W x 3.5" D.
Rack Mount (with removable rack mounting adapter):

5.25" H x 19.0" W ( or 24.0" W ) x 12.0" D.

Weight As normally packaged including carton and accessories: 8 lbs.

Unit alone (without packaging and accessories): 6 lbs.

Operating
Range

Temperature: 0 to 50 degrees C. operating.
Relative Humidity: 5 to 95% non-condensing.
Altitude: 10,000 ft. max. operating,
50,000 ft. max. non-operating.
Shock and Vibration: As normally encountered during shipping
and handling.

Power
Requirements

AC Input 100 - 240 VAC, 50 - 60 Hz., 5.0A max.

0.5A max. for the unit’s internal power requirements.

4.5 A max. for device (if any) connected to the Switched AC
Output.
Fused - 5A/250V Slow Blow, 5x20mm.
Switched AC Output: max, 250 VAC, 4.5 A.

CAUTION:

FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE FUSE ONLY WITH THE SAME TYPE AND
RATING.

ATTENTION:

POUR NE PAS COMPROMETTRE LA PROTECTION
CONTRE LE RISQUE D’INCENDIE REMPLACER PAR UN
FUSIBLE DE MEMES TYPE ET CARACTERISTIQUE
NOMINALES.

Regulatory
Compliance

UL - 1950, Third Edition and CAN/CSA C22.2 No. 950-95,
Third Edition, FCC Part 15, Class A Digital Device,
Canada’s ICES003, Class A Digital Device, FCC Part 68

Basic FrameSaver NP 64+ FrameSaver NP 64+ with ISDN

READY LED may flash several times,
then remain OFF during self-test
(approxi mately 45 seconds).

READY LED is ON steady after
completion of self-test.

The DDS ALARM and FR MGMT. LEDs should not be flashing together.
All other LED indications should be ignored at this time.

Contact your service representative, distr ibutor or s ales repres entative to ord er cables .

FrameSaver NP 64+ Cable List

Description Part No.

DDS network cable, RJ-48, twisted pair 135-982-0006
Dial Line (POTS) cable, RJ-11 connector 135-007-7200
ISDN BRI network cable, RJ-49 connector 135-981-0006
EIA-232 Data Port (DTE) cable 135-000-0400
EIA-530 Data Port (DTE) cable 135-002-0400
EIA-530A Data Port (DTE) cable 135-003-0400
ITU-X.21-NS Data Port (DTE) cable 135-005-0400
ITU-V.35 Data Port (DTE) cable 135-001-0400
ITU-V.35 Data Port (DTE) cable to Cisco router serial port,

HD-60 connector

135-006-0400

Console cable (to AUX2), DB-9 connector 135-000-0464
Console cable (to AUX2), D B -25 connector 135-007-0400
AUX Port to router console port cable, DB-25 connector 135-008-0400
AUX Port to Cisco router console port, RJ-45 type connector 135-990-0006

134

Contact your servi ce repr esen ta tiv e, di s tri but or or s al es repr esen tati ve to ord e r cables .

Before You Begin

Ensure you have the following:

•

A dedicated, grounded, circuit breaker p rotected power outlet within six feet o f
the FrameSaver NP unit.

•

A suitable location for the unit that is clean, well-lit, ventilate d and free fro m
environmental extremes.

•

One to two feet of clearance for cable connections to the unit.

Package Checklist

Verify that the packaging contains the following:

•

FrameSaver NP unit

•

Unit power cord or AC Power Pack with cord

•

If ordered, optional wall-mount or rack-mount bracket assembly.

In addition, you will need Input/Output cables if not already supplied. These cables are
listed for each FrameSaver NP Model on pages 13 - 15 of this guide.

Mounting the FrameSaver NP

FrameSaver NP units come equipped with rubber feet for table or shelf-top placemen t.
Optional adapter brackets are available for wall mounting (Model 64+ includes wall-
mount key-holes in its base) and standard 19" or 24" rack mounting. To attach and
mount adapter brackets, follow the instructions supplied with the mounting adapters.

Allow sufficient space for cooling and access to the front panel indicators for trouble-
shooting in all installations.

FrameSaver NP 100 (120) Cable List

Description Part No.

T1 network cable, RJ-48, twisted pair (NP 100 only) 135-982-0006
Dial Line (POTS) cable, RJ-11 connector (NP 100 only

) 135-007-7200
ISDN BRI network cable, RJ-49 connector (NP 100 only) 135-981-0006
EIA-530 Data Port (DTE) cable (NP 100 only

) 135-002-0400

EIA-530A Data Port (DTE) cable (NP 100 only

) 135-003-0400
ITU-X.21-NS Data Port (DTE) cable (NP 100 only) 135-005-0400
ITU-V.35 Data Port (DTE) cable (NP 100 only

) 135-001-0400

ITU-V.35 Data Port (DTE) cable to Cisco router serial port,

HD-60 connector (NP 100 only

)

135-006-0400

Console cable (to AUX2), DB-9 connector 135-000-0464
Console cable (to AUX2), DB-25 connector 135-007-0400
AUX Port to router console port cable, DB-25 connector 135-008-0400
AUX Port to Cisco router console port, RJ-45 type connector 135-990-0006
ITU-V.35 Compliant network cable (NP 120 only

) 135-001-0480

ITU-X.21-NS network cable (NP 120 only

) 135-005-0480
ITU-V.35 Compliant User Port cable (NP 120 only) 135-002-0480
EIA-530 User Port cable (NP 120 only

) 135-003-0480

EIA-530A User Port cable (NP 120 only

) 135-004-0480

14 3

Contact your service representative, distr ibutor or s ales repres entative to ord er cables .

FrameSaver NP 110 Cable List

Description Part No.

T1 or DSX network cable, RJ-48, twisted pair 135-982-0006
Dial Line (POTS) cable, RJ-11 connector 135-007-7200
ISDN BRI network cable, RJ-49 connector 135-981-0006
Console cable (to AUX2), DB-9 connector 135-000-0464
Console cable (to AUX2), D B -25 connector 135-007-0400
AUX Port to router console port cable, DB-25 connector 135-008-0400
AUX Port to Cisco router console port, RJ-45 type connector 135-990-0006

15

Trademarks

FrameSaver is a registered trademark of Paradyne Corporation. All other products,
systems, or services mentioned in this documen t are tradem arks , service mar ks , regis ­tered trademarks or registered service marks of their respective owners.

Copyright Notice

© Copyright 1999-2000 Paradyne Corporation. All rights reserved.

Sales, Service and Warranty Information

Contact your local service representative, distributor or sales representative for addi­tional information or help concerning service, repair, installation, documentation, war­ranty or sales. Or contact Paradyne Corporation at:

•

Telephone:

201-703-4800

•

Internet:

http://www.paradyne.com

•

FAX:

201-703-4889

•

Mail:

Paradyne Corporation

16-00 Pollitt Drive
Fair Lawn NJ 07410

FrameSaver

Installation & Quick Reference Guide

FrameSaver NP Models 64+, 100, 110 and 120

Document Number 980-000-0272B
August 2000

This Quick Reference Guide provides an over view on how to inst all a FrameSaver NP
Model 64+, 100, 110 or 120 unit. This includes making the physical connections be-
tween the unit, netw ork, DTE device(s), and telephone line. It also tells you ho w to find
more detailed information about your FrameSaver NP.

Product Documentation on the World Wide Web

We provide complete product documentation online. This lets you search the docu-
mentation for specific topics and print only what you need, reducing the waste of sur-
plus printing. It also helps us provide timely product update information and maintain
competitive prices for our products.

Complete documentation for these products is available at
Select Library

FrameSaver NP (NetPath) Frame Relay Digital Access Units

Select the appropriate document from the documentation list:

FrameSaver NP 64+ User’s Manual - Installat ion Guide, Publicatio n # 980-001- 0221
FrameSaver NP 100 U s er’s M an ual - Installatio n G u id e , P ub licati o n # 980-001-0210
FrameSaver NP 110 U s er’s M an ual - Installatio n G u id e, P ub l ication # 980-001- 024 0
FrameSaver NP 120 U s er’s M an ual - Installatio n G u id e, P ub l ication # 980-001- 023 0