Paradyne ENE2020-P User Manual
ENE2020-P and ENE2020-S
2-Port E1 Network Extenders Installation Instructions
Document Number ENE2-A2-GN10-10
September 2005
Contents
Software and Firmware License Agreement ................................................. 1
Product Documentation ................................................................................ 3
Warranty, Sales, Service, and Training Information ...................................... 3
Package Contents ......................................................................................... 3
Powering Up the ENE2020 ........................................................................... 4
Configuring the E1 Ports ............................................................................... 5
Connecting the E1 Lines ............................................................................... 8
Connecting the Ethernet Line ....................................................................... 9
LED Indicators .............................................................................................. 10
RJ45 Pin Assignments .................................................................................. 12
EMI Notices .................................................................................................. 13
Important Safety Instructions ........................................................................ 14
Software and Firmware License Agreement
ONCE YOU HAVE READ THIS LICENSE AGREEMENT AND AGREE TO ITS
TERMS, YOU MAY USE THE SOFTWARE AND/OR FIRMWARE INCORPORATED
INTO THE PARADYNE PRODUCT. BY USING THE PARADYNE PRODUCT YOU
SHOW YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE AGREEMENT.
IN THE EVENT THAT YOU DO NOT AGREE WITH ANY OF THE TERMS OF THIS
LICENSE AGREEMENT, PROMPTLY RETURN THE UNUSED PRODUCT IN ITS
ORIGINAL PACKAGING AND YOUR SALES RECEIPT OR INVOICE TO THE
LOCATION WHERE YOU OBTAINED THE PARADYNE PRODUCT OR THE
LOCATION FROM WHICH IT WAS SHIPPED TO YOU, AS APPLICABLE, AND YOU
WILL RECEIVE A REFUND OR CREDIT FOR THE PARADYNE PRODUCT
PURCHASED BY YOU.
The terms and conditions of this License Agreement (the “Agreement”) will apply to the
software and/or firmware (individually or collectively the “Software”) incorporated into
the Paradyne product (the “Product”) purchased by you and any derivatives obtained
1
from the Software, including any copy of either. If you have executed a separate written
agreement covering the Software supplied to you under this purchase, such separate
written agreement shall govern.
Paradyne Corporation (“Paradyne”) grants to you, and you (“Licensee”) agree to accept
a personal, non-transferable, non-exclusive, right (without the right to sublicense) to use
the Software, solely as it is intended and solely as incorporated in the Product
purchased from Paradyne or its authorized distributor or reseller under the following
terms and conditions:
1. Ownership: The Software is the sole property of Paradyne and/or its licensors. The
Licensee acquires no title, right or interest in the Software other than the license
granted under this Agreement.
2. Licensee shall not use the Software in any country other than the country in which
the Product was rightfully purchased except upon prior written notice to Paradyne
and an agreement in writing to additional terms.
3. The Licensee shall not reverse engineer, decompile or disassemble the Software in
whole or in part.
4. The Licensee shall not copy the Software except for a single archival copy.
5. Except for the Product warranty contained in the manual, the Software is provided
“AS IS” and in its present state and condition and Paradyne makes no other
warranty whatsoever with respect to the Product purchased by you. THIS
AGREEMENT EXPRESSLY EXCLUDES ALL OTHER WARRANTIES, WHETHER
EXPRESS OR IMPLIED, OR ORAL OR WRITTEN, INCLUDING WITHOUT
LIMITATION:
a. Any warranty that the Software is error-free, will operate uninterrupted in your
operating environment, or is compatible with any equipment or software
configurations; and
b. ANY AND ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT.
Some states or other jurisdictions do not allow the exclusion of implied warranties
on limitations on how long an implied warranty lasts, so the above limitations may
not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from one state or jurisdiction to another.
6. IN NO EVENT WILL PARADYNE BE LIABLE TO LICENSEE FOR ANY
CONSEQUENTIAL, INCIDENTAL, PUNITIVE OR SPECIAL DAMAGES,
INCLUDING ANY LOST PROFITS OR LOST SAVINGS, LOSS OF BUSINESS
INFORMATION OR BUSINESS INTERRUPTION OR OTHER PECUNIARY LOSS
ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE,
WHETHER BASED ON CONTRACT, TORT, WARRANTY OR OTHER LEGAL OR
EQUITABLE GROUNDS, EVEN IF PARADYNE HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY THIRD
PARTY.
7. The rights granted under this Agreement may not be assigned, sublicensed or
otherwise transferred by the Licensee to any third party without the prior written
consent of Paradyne.
2
8. This Agreement and the license granted under this Agreement shall be terminated
in the event of breach by the Licensee of any provisions of this Agreement.
9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the possession of
Licensee together with all documentation and related materials.
10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.
Product Documentation
This document describes units manufactured after 13 January 2005. See the prior
version of this document for information about units manufactured on or before that date.
Complete documentation for Paradyne products is available at www.paradyne.com.
Select Support → Technical Manuals.
To order a paper copy of a Paradyne document, or to speak with a sales representative,
please call 1-727-530-2000.
Warranty, Sales, Service, and Training Information
Contact your local sales representative, service representative, or distributor directly for
any help needed. For additional information concerning warranty, sales, service, repair,
installation, documentation, training, distributor locations, or Paradyne worldwide office
locations, use one of the following methods:
Internet: Visit the Paradyne World Wide Web site at www.paradyne.com. (Be sure
to register your warranty at www.paradyne.com/warranty.)
Telephone: Call our automated system to receive current information by fax or to
speak with a company representative.
— Within the U.S.A., call 1-800-795-8004
— Outside the U.S.A., call 1-727-530-2340
Package Contents
Unpack and Inspect the Equipment. The following components should be included:
1 ENE2020
1 Power supply
If there is any visible damage, do not attempt to connect the device. Contact your sales
or service provider.
3
Powering Up the ENE2020
Plug the power supply into the power adapter port on the back of the ENE2020 and
connect it to your power source.
10/100 Connection
Power
Adapter
5V DC
1
2
3
4
Port 2 Config
5
6
7
8
Port 2
T1 or E1
Port 1
1
2
3
4
Port 1 Config
5
6
04-17581
7
8
Verify that the Power LED on the front of the ENE2020 is illuminated.
E1
Network Extender 2000
E
Port 2
Port 1
Lnk
Alm
E1 Connection
Power
100
10/100 Ethernet Connection
Act
NE2020
Lnk
04-17580
NOTE: Upon start up, the Ethernet link will remain disabled (as indicated by no
illumination of the Ethernet 100, Act and Lnk LEDs) until at least one of the two E1
connections has been established.
4
Configuring the E1 Ports
Configuration Switches for both E1 Port 1 and E1 Port 2 are numbered from left to right,
1–8.
Table 1. Configuration Switch Settings
ENE2020-P Provider
Configuration Switches
ENE2020-S Subscriber
Configuration Switches
Switch Port 1 Port 2 Port 1 Port 2
1 Speed Speed Not used. The ENE2020-S
2
3 Frame Type Not used. Port 2
frame type is
determined by
the Port 1 frame
type
configuration.
4 Line Code Not used. Port 2
line code is
determined by
the Port 1 line
code
configuration.
5 Not used Not used Not used Not used
6 Not used Not used Not used Not used
7 Timing Not used. Port 2
timing is
determined by
the Port 1 timing
configuration.
determines speed via
communication with its partner E1
provider unit.
Frame Type Not used. Port 2
frame type is
determined by
the Port 1 frame
type
configuration.
Line Code Not used. Port 2
line code is
determined by
the Port 1 line
code
configuration.
Not used. The ENE2020-S
determines timing via
communication with its partner E1
provider unit
8 Not used Not used Not used Not used
5
Loading...