Paradigm X-850 User Manual

WHITE, PAINTABLE
Dual State-of-the-Art Side­Mounted 4˝ (102 mm) x 14˝ (356 mm) Mineral-Filled Co­Polymer Polypropylene Cones.
Highly damped and tremendously rigid cone provides tight, well-defined low­frequency response with a weight and authority that does justice to the most challenging music and movie material.
Pleated LCS™Linear Corrugated Surround features Ultra-Long­Travel Suspension. The over-molded
design produces truly exceptional peak­to-peak cone movement producing higher output and lower distortion— every bass note sounds distinct. Cone ribbing increases stiffness, reducing resonances to inaudible levels.
State-of-the-Art Motor Structure/ FEA-Optimized 1/2-lb (0.19 kg) Super-Neodymium Magnets.
1˝ (25 mm) 6-layer voice-coil, anodized high-temperature aluminum former and
®
dual Nomex
cloth spiders. The huge ceramic/ferrite magnets generate a truly enormous magnetic forcefield in the gap … always a plus in a subwoofer!
One-Piece High-Pressure Ultra-
Die-Cast Chassis and
Rigid Immovable MDF Medium Density Fiberboard Mounting System:
State-of-the-art system! A superbly rigid structure that easily withstands every decibel of the enormous power generated by the two state-of-the-art 4˝x14˝ bass drivers!
NOTE: A backbox is optional with this subwoofer.
21
Twin vibration-canceling woofers!
Impedance Matching Switch:
Allows use with X-300 or X-850 amplifiers
Minimal footprint: For retrofits and new construction mounts into a standard 2˝x 4˝ stud bay.
BIG BASS WITH NO FLOOR SPACE!
How do you get Reference quality performance (i.e. phenomenal output, breathtaking clarity, superb extension and speed!) out of an in-wall subwoofer without it tearing your wall to shreds with the first big explosion or tympani crescendo?
Serious high-output subwoofers produce real energy. However, the majority of in-wall subwoofers out there don’t (read: CAN'T!) produce serious bass, so vibrational energy isn’t an issue. Not so with the RVC-12SQ in-wall subwoofer. It’s like a dog off the leash. Free from the constraints of conventional in-wall design, boasting dual state-of-the-art 14˝ drivers in a cutting-edge Vibration- Canceling design architecture (see below), it’s free to dig deeper for new levels of articulate, soul­stirring bass while chasing new heights in performance.
WE’RE STIRRING UP GOOD VIBRATIONS
Bass frequencies are notorious for stirring up wall vibrations – not a good thing! Conventional in-wall subs excite these vibrations through a reactive force opposite to that created by the movement of the voice coil. We turned things around. In the RVC-12SQ the two woofers fire in phase, in opposite directions
(see transparency above left)
. This results in a physical cancelation of wall vibrations.
Paired with a matching Paradigm X amp and enhanced by the critically acclaimed Paradigm Perfect Bass Kit
digital room correction system (sold separately), RVC-12SQ delivers bass that will
rock your world, not your walls.
For new construction an optional BX-12SQ backbox is designed to maximize output by adding precision low-noise ports. In truth, with the use of this backbox, performance is even a notch better!
Backbox optional for new construction applications.
22
BLACK
lowest frequency
Typical Subwoofer Response
0 db
0 Hz 200 Hz
90+ db
highest frequency
Paradigm’s Subwoofer Response
X-850: 2,550 watts Dynamic Peak Power / 850 watts RMS Continuous Sustained. Powers one or two Paradigm Reference custom subwoofers.
X-300: 900 watts Dynamic Peak Power / 300 watts RMS Continuous Sustained. Powers one Reference or two, three or four Paradigm custom subwoofers.
Control Facilities:
• Auto On/Off
• Subwoofer Level
• Subwoofer Cut-Off Frequency (continuously variable 35 Hz – 200 Hz in X-850: 35 Hz – 150 Hz in X-300)
Input Facilities:
• Single-Ended RCA Inputs
• Sub-In Right (Mono) Input
• Balanced XLR Input (X-850 model only)
• USB Port/PBK Interface
(see next page)
with Bypass Option
• Sub/Sat Phase Alignment (continuously variable 0° to 180°)
Shown: X-850
33
Paradigm’s DSP design boasts sophisticated algorithms
which shape frequency response, ensuring accurate, consistent and musical bass performance without audible distortion, even when the subs play at the loudest levels.
Easy-to-Adjust Front-Panel Controls. Glass cover attaches
magnetically once controls are set.
RVC Series
Single high-excursion driver, in-ceiling, combination die-cast and GRIP
chassis/mounting bracket
X-300 (up to 4 PCS subwoofers)
210-mm (8 in) CFP
cone, 38-mm (1-1/2 in) voice coil, over-molded
TPR
surround, high-temperature polyamide former, ceramic/ferrite
magnet structure
19 Hz (DIN)
29.6 cm / 11-10/16 in
14.8 cm / 5-14/16 in
27.0 cm / 10-10/16 in
22 L / 0.77 cu ft
2.6 kg / 5.2 lb each
White, paintable
PB-10R; retrofit included
BX-10R
Single high-excursion driver, in-wall, GRIP
chassis/mounting bracket
X-300 (up to 4 PCS subwoofers)
210-mm (8 in) CFP
cone, 38-mm (1-1/2 in) voice coil, over-molded
TPR
surround, high-temperature polyamide former, ceramic/ferrite
magnet structure
19 Hz (DIN)
21.4 cm x 21.4 cm / 8-1/2 in x 8-1/2 in
10.0 cm / 3-15/16 in
19.1 cm x 19.1 cm / 7-1/2 in x 7-1/2 in
22 L / 0.77 cu ft
1.7 kg / 3.7 lb each
White, paintable
PB-7x7; retrofit included
BX-80SQ
Design
Matching Paradigm
®
X-Series Amplifier
(required, sold sep.)
Bass Driver
Low-Frequency Extension*
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Pre-Construction Bracket (sold sep.)
Optional Ported Backbox (sold sep.)
PCS Series
PCS-80R
PCS-80SQ
Design
®
Matching Paradigm (required, sold sep.)
Bass Drivers
Low-Frequency Extension*
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Optional Ported Backbox (sold sep.)
X-Series Amplifiers
RVC-12SQ
Vibration-canceling in-wall, two high-excursion drivers, die-cast chassis with MDF mounting frame
X-850 (for 1 or 2 RVC-12SQ subwoofers) X-300 (for 1 RVC-12SQ subwoofer)
Two 356-mm (14 in) x 102-mm (4 in) mineral-filled co-polymer polypropylene cones
17 Hz (DIN)
45.1 cm x 34.9 cm 17-3/4 in x 13-3/4 in
8.9 cm / 3-1/2 in
41.7 cm x 32.0 cm / 16-7/16 in x 12-10/16 in
28.4 L / 1 cu ft
6.5 kg / 14.3 lb each
White, paintable
BX-12SQ
X-Series Amplifiers
Design
Amplifier: High-Current, Discrete Output
Amplifier Features
Subwoofer Cut-Off Frequency
Sub/Sat Phase Alignment
Line-Level Input
Speaker-Level Outputs
Height, Width, Depth
Weight (unpacked)
Finish
X-300 X-850
Ultra-Class-D™power amplifier, proprietary EQ software to configure amp for specific application, USB port/PBK interface for programming and optional PBK digital room correction system
900 watts Dynamic Peak / 300 watts RMS
Auto-On/Off, soft clipping, electrical shorting protection, thermal protection
Variable 35 Hz – 200 Hz; Bypass Option
Variable 0° – 180°
RCA. From Sub-Out/LFE-Out of receiver, processor or other line-level source
SUB 1/2; SUB 3/4
8.9 cm x 43.2 cm x 37.5 cm: 2 rack units 3-1/2 in x 17 in x 14-3/4 in: 2 rack units Includes rack ears for mounting in 19
˝
rack
6.1 kg / 13.5 lb each
Black
Ultra-Class-D amp for specific application, USB port/PBK interface for programming and optional PBK digital room correction system
2,550 watts Dynamic Peak / 850 watts RMS
Auto-On/Off, Trigger On/Off, soft clipping, electrical shorting protection, thermal protection
Variable 35 Hz – 200 Hz; Bypass Option
Variable 0° – 180°
RCA or Balanced XLR. From Sub-Out/LFE-Out of receiver, processor or other line-level source
SUB 1/2
8.9 cm x 43.2 cm x 37.5 cm: 2 rack units 3-1/2 in x 17 in x 14-3/4 in: 2 rack units Includes rack ears for mounting in 19
7.4 kg / 16.3 lb each
Black
power amplifier, proprietary EQ software to configure
˝
rack
Loading...