Paradigm Soundtrack System User Manual
REV. 100912
Amplied Soundbar and Wireless Subwoofer
For more information visit www.paradigm.com/shift
205 Annagem Blvd., Mississauga, ON Canada L5T 2V1
Paradigm Electronics Inc.
design improvements are incorporated.
respective owner(s). Paradigm Electronics reserves the right to change specifications and/or features without notice as
Electronics Inc. Copyright © Paradigm Electronics Inc. All rights reserved. All other trademarks are the property of their
Paradigm, Soundtrack and associated proprietary and patented designs and technologies are registered trademarks of Paradigm
Set-Up Guide
™
The Ocial Sound of YOU
What’s in the box . . .
Soundtrack
soundbar
Your Soundtrack System is capable of learning
codes from remote controls you are using
for other sources. See manual for details.
Remote
A
Power cord
(Adaptor for use in horizontal
position, wired connection only)
Feet
Subwoofer feet and screws
Grille
On-wall brackets
#2 Phillips (not supplied)
B C D
Soundtrack
Dual RCA cable
Digital optical cable
subwoofer with cradle
Power cord
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 1 12-10-09 2:33 PM
OPTIONAL: For wall mounting instructions, refer to Owners Manual.
BEFORE YOU BEGIN, READ THE SAFETY PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS INCLUDED IN THE OWNERS MANUAL.
OPTIONAL Setting up the soundbar
Attach the Feet Attach feet to subwoofer
Lay your soundbar face down on a soft
surface. Insert feet as shown, press rmly
until you hear a 'click'.
Wireless pairing
Connecting to source Power connection
2 31
NOTE: Choose analog
OR digital connections
TV
C
B
3.5-mm to mobile
audio device,
not included
Analog connection to
TV (use for good audio)
B
C
Digital connection to
TV (use for best audio)
Connect to power source.
A
for horizontal positioning
Attach the feet.
#2 Phillips
(not supplied)
Feet must be
attached for heat
dissipation clearance
Power on, sync to subwoofer
1
Using the Remote or Onboard Interface. Turn Power
ON and repeatedly press Input Selector until you
hear audio. Press the Wireless Sync button to
initiate connection to subwoofer.
Volume
Power
Input
Selector
Wireless
Sync
Wireless status indicator
2
The Wireless Status Indicator on the soundbar
should blink blue for less than 30 seconds
and then go back to normal operation.
*If the soundbar Wireless Status Indicator
alternates between red and blue blinking,
pairing has failed and the process must
be repeated.
Connect to power source.
D
Wireless settingPower connection
43
Move switch to “wireless”
setting on subwoofer.
Wireless Range
50’
or 15 Meters
Adjust subwoofer loundness
5
Your subwoofer’s LEVEL switch is set to 12 o’clock
to suit average preferences. If desired, adjust up or
down to match sound level of your speakers.
–
BASS
+
BASS
Paradigm_Soundtrack_Set-Up_Guide_EN.indd 2 12-10-09 2:33 PM
Loading...