Page 1
WHITE, PAINTABLE
PV-60R
PV-160
PV-150
BEHIND EVERY GOOD SPEAKER
… lies a good design! While many in-wall/in-ceiling speakers may look good, it’s what’s behind the speaker
that counts! The design and technology … the stuff you can’t see, but if not ‘done right’ results in a poorsounding speaker. Behind every PV speaker is a combination of design, technology and engineering that is
simply unheard of in this entry-level segment of the market. In fact, PV speakers take our industry-leading
Performance and Value to an entirely new level.
VC-150 Volume Control
(see the specification pages for full details)
PV-50R
1
Page 2
Shown: PV-160
Textured Pure Silk Domes with
ferro-fluid cooling and damping promote
clear and well-extended high-frequency
response, superb transparency and a
tremendous spaciousness.
Mineral-Filled Polypropylene
Cones deliver natural, detailed
midrange performance in addition
to smooth, well-articulated and wellextended bass response.
Rigid IRP™Injection-Molded Ribbed
Polymer Chassis.
Easy Installation! Unique hidden
spring clamps make installation a snap!
2
Page 3
Specifications
PV Series
Design
Crossover
High-Frequency Driver
Bass/Midrange Driver
Low-Frequency Extension*
Frequency Response:
Sensitivity – Room/Anechoic
Suitable Amplifier Power Range
Maximum Input Power†
Impedance
External Dimensions: (D or H x W)
Minimum Mounting Depth**
Cutout Dimensions: (D or H x W)
Minimum Internal Volume Required
Weight (unpacked)
Finish
Pre-Construction Bracket (sold sep.)
On-Axis
30˚ Off-Axis
PV-50R PV-60R PV-150 PV-160
2-driver, 2-way in-ceiling/in-wall, coaxially mounted high-frequency driver,
™
chassis/spring clamps
IRP
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) silk dome
140-mm (5-1/2 in) mineral-filled polypropylene cone
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
88 dB / 84 dB
15 – 60 watts
30 watts
Compatible with 8 ohms
19.8 cm / 7-3/4 in
7.0 cm / 2-3/4 in
16.9 cm / 6-10/16 in
6 L / 0.22 cu ft
1.2 kg / 2.6 lb each
White, paintable
PB-7R; retrofit included
2-driver, 2-way in-ceiling/in-wall, coaxially mounted high-frequency driver,
™
chassis/spring clamps
IRP
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) silk dome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 18 kHz
89 dB / 85 dB
15 – 70 watts
40 watts
Compatible with 8 ohms
22.9 cm / 9 in
7.6 cm / 3 in
19.6 cm / 7-3/4 in
12 L / 0.42 cu ft
1.7 kg / 3.8 lb each
White, paintable
PB-8R; retrofit included
2-driver, 2-way in-wall/in-ceiling, IRP
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) silk dome
140-mm (5-1/2 in) mineral-filled polypropylene cone
60 Hz (DIN)
±2 dB from 75 Hz – 20 kHz
±2 dB from 75 Hz – 18 kHz
88 dB / 84 dB
15 – 70 watts
40 watts
Compatible with 8 ohms
26.6 cm x 18.6 cm / 10-1/2 in x 7-6/16 in
5.9 cm / 2-5/16 in
23.3 cm x 15.3 cm / 9-3/16 in x 6 in
6 L / 0.22 cu ft
1.7 kg / 3.7 lb each
White, paintable
PB-6x9; retrofit included
™
chassis/spring clamps
2-driver, 2-way in-wall/in-ceiling, IRP
2nd-order electro-acoustic at 2.5 kHz
25-mm (1 in) silk dome
165-mm (6-1/2 in) mineral-filled polypropylene cone
55 Hz (DIN)
±2 dB from 70 Hz – 20 kHz
±2 dB from 70 Hz – 18 kHz
89 dB / 85 dB
15 – 80 watts
50 watts
Compatible with 8 ohms
28.5 cm x 20.8 cm / 11-1/4 in x 8-3/16 in
6.5 cm / 2-9/16 in
25.4 cm x 17.8 cm / 10 in x 7 in
12 L / 0.42 cu ft
2.2 kg / 4.9 lb each
White, paintable
PB-7x10; retrofit included
™
chassis/spring clamps
36
Loading...