827 LAT MACHINE
CLASS H
PART # 7302801
REV . A
USER’S GUIDE
1
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
Version: 827108
Revision: 06/14/02
j
TABLE OF CONTENTS
Safety Statement.............2
General Notes..................3
Tools Required................3
Gym Layout.....................4
Parts list..........................5
Assembly Instructions.....5-15
General Maintenance.......16
W arranty Statement..........17
Product Services..............18
Insert-Registration Card
IMPORTANT SAFETY INFORMATION
THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF
EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES!
1. Before using, read all the warnings and instructions
on the use of this machine. Use only for intended
exercise. DO NOT modify the machine.
2. Obtain a medical exam before beginning any
exercise program.
3. Keep body and clothing free of all moving objects.
4. Inspect the machine before use. DO NOT use it if it
appears damaged. DO NOT attempt to fix a broken or
ammed machine. Notify your authorized ParaBody
dealer before use and have repairs made by an
authorized service technician.
6. Never pin the weights or prop plate into an elevated
position. DO NOT use the machine if found in this
condition. DO NOT attempt to fix. Notify your
authorized ParaBody dealer.
7. Inspect cables and their connections before using
machine. Pay particular attention to the cable ends.
DO NOT attempt to fix. Notify your authorized
ParaBody dealer before use and have repairs made by
an authorized service technician.
8. Make sure all spring loaded pull pins are fully
engaged in the adjustment position and fully tighten
thumbscrew before use.
5. Be certain that weight pin is completely inserted.
Use only the pin provided by the manufacturer. If
unsure, call your authorized ParaBody dealer.
NOTE: In a continual effort to improve our products, specifications are subject to change
2001 Life Fitness, a division of Brunswick Corporation. All rights reserved.
©
ParaBody is a trademark of Brunswick Corporation
www.parabody.com
9. Children must not be allowed near this machine.
Supervise teenagers.
.
2
IMPORTANT NOTES
Please note:
* Thank you for purchasing the ParaBody LAT MACHINE. Please read these
instructions thoroughly and keep them for future reference. This product must be assembled
on a flat, level surface to assure its proper function.
* This product must be assembled on a flat, level surface to assure its proper function. DO NOT
securely tighten any frame connections until the entire frame has been assembled, unless
otherwise stated.
T ools Required for Assembly
* Rubber mallet or hammer
* 3/4” wrench
* 9/16” wrench
* Ratchet with 3/4” and 9/16” sockets
* 5/32” Allen wrench
* Adjustable wrench
* T ape measure
NOTE: BOL T LENGTH IS MEASURED FROM THE UNDERSIDE OF THE HEAD OF THE BOLT.
BOL T LENGTH RULER:
1/2 1/2 1/2 1/2 1/2 1/2
0
1
Bolt Length Ruler
BOLT LENGTH
2
345
3
6
1’
2’
3’
4’
5’
1’ 2’ 3’ 4’ 5’
1 Square = 1’ X 1’
Minimum Required Usable Space
Length = 82 inches (208.5 cm) 6’ 10”
Width = 71 inches (180.5 cm) 5’11”
Height = 83 inches (211 cm) 6’ 11”
Dimensions Including Leg Press (optional)
Length = 82 inches (208.5 cm) 6’ 10”
Width = 108 inches (180.5 cm) 9’ 0”
4
PARTS LIST
KEY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
PART #
6759109
6758909
6760209
6760109
6759810
6759310
6275310
6274410
6489910
6664821
6194601
6576201
3103102
3116201
3116101
6177001
6405201
7234801
6692601
3119301
DESCRIPTION
BASE
FRONT UPRIGHT
REAR UPRIGHT
TOP BOOM
CARRIAGE
ROLLER P AD SUPPOR T
LA T BAR
LOW ROW BAR
1/4 X 2 X 7-1/4” PLATE
SEA T P AD
ROLLER P AD
CABLE
1 X 8” GRIP
3-1/2” PULLEY
4-1/2” PULLEY
2-1/2 X 5-1/2” NON-SKID STP
2” SQ. END CAP
2” SQ COVER CAP
3 X 2” END CAP
2-1/2” ROUND END CAP
QTY
1
1
1
1
1
1
1
1
2
1
2
2
4
5
2
2
2
2
3
2
KEY
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
LEA
PART #
6590801
6387901
3105401
3116001
3114403
3114702
3114401
3114701
3235209
3235211
3235216
3235312
3235316
6480301
6412001
3103801
3108102
6075906
6140701
DESCRIPTION
3 X 2” INSERT GUIDE
5” VINYL CAP
ST ARLOCK COLLAR
1-1/4” SQ. RUBBER BUMPER
3/8” WASHER
3/8” LOCK NUT
1/2” WASHER
1/2” LOCK NUT
3/8 X 2-1/4” BOLT
3/8 X 2-3/4” BOLT
3/8 X 4” BOLT
1/2 X 3” BOLT
1/2 X 4” BOLT
3/8” FLANGE SP ACER
SPRING PIN ASSEMBLY
5/16” SNAP LINK
1/4” QUICK DISCONNECT LK
12 LINK CHAIN
1 X 1” GLIDE
QTY
2
2
2
1
13
10
6
6
2
9
1
3
4
10
1
3
1
1
8
1/2 1/2 1/2 1/2 1/2 1/2
0
1
2
345
5
6
18
19
3
28
27
20
16
19
1
32 1/2 X 3”
FIGURE 1
STEP 1:
• Attach two 2” SQ. COVER CAPS (18) onto the ends of the REAR UPRIGHT (3) as shown in FIGURE 1.
• Insert two 3 X 2” END CAPS (19) into the ends of the BASE (1) and REAR UPRIGHT (3) as shown in FIGURE 1.
• Insert two 2-1/2” ROUND END CAP (20) into the tube on the BASE FRAME (1) as shown in FIGURE 1.
• LOOSELY assemble the REAR UPRIGHT (3) to the BASE (1) using two 1/2 X 3” BOLTS (32), two 1/2” WASHERS (27), and
two 1/2” LOCK NUTS (28). See FIGURE 1.
• Apply NON-SKID STRIPS (16) to BASE (1) as shown
6
Loading...