Papago GoSafe TPMS 500BT User Manual

Tire Pressure Monitoring System
User’s Manual
Introduction
This wireless Tire Pressure Monitoring System (TPMS) was designed
specifically to increase driving safety and to provide a better
understanding of your vehicle’s tire conditions. Once you have correctly
installed the TPMS, these sensors will automatically monitor tire
receiver via wireless communications. The receiver then utilizes
Bluetooth technology to transmit information to the driver’s iPod,
iPhone, iPad, or Android mobile phone.
When abnormal pressure increases or decreases are detected in the
tires, the mobile phone app will immediately emit warning sounds and a
flashing light to remind the driver to stop the vehicle and check the tires.
This system will ensure your driving safety.
1
GoSafe TPMS Tire Pressure Monitoring System Product Characteristics
1. Simple DIY Installation
No wire installations or tire removal/installation. Simply install sensors
onto the tire valves and complete installation within 3 minutes !
2. Graphical Interface
Intuitive operating interface, simple and clear indication of pressure
and temperature changes for all four tires.
3. High Precision
Electronic pressure detection differs from traditional valve detection,
with a degree of pressure precision that can reach ±1 PSI.
4. Wireless System Structure
Bluetooth transmission technology is utilized for the sensors to
transmit tire pressure and temperature automatically to a mobile
phone screen once the vehicle is started.
2
5. Sensor Battery Power Display
When sensors are low on power, the system automatically prompts
the user to replace the batteries. The user can also monitor remaining
battery power at any time.
6. Sensor Anti-theft Design
Anti-theft nuts ensure fortified installation of sensors, preventing easy
removal.
3
About this Manual
The information contained within this manual is subject to change
without notice.
This manual has been carefully written. If you have any comments or
questions regarding this manual, please contact our customer
service center or your local dealer.
Please read this manual thoroughly before operating this system and
ensure a complete understanding of the regulations and use
restrictions pertaining to the parts and accessories. We are not liable
for any losses, damages, or harm which incurs from misuse or
misappropriation of this device for other functions.
Safety Warnings
4
The information contained within this manual is subject to change
without notice.
This manual has been carefully written. If you have any comments or
questions regarding this manual, please contact our customer
service center or your local dealer.
Please read this manual thoroughly before operating this system and
ensure a complete understanding of the regulations and use
restrictions pertaining to the parts and accessories. We are not liable
for any losses, damages, or harm which incurs from misuse or
misappropriation of this device for other functions.
This product is suitable for use in sedans, SUVs, and sports cars with
a tire pressure no greater than 60 PSI. The device does not support
trucks, tow trucks, large commercial vehicles, or trailers.
Product Contents
5
The packaging should contain the following parts and accessories.
Please contact our customer service center or your local dealer if there
are any damaged or missing parts.
1 3
A-type Sensor
2
Receiver
4
Anti-theft nut
7 User’s manual
6
Velcro
5
Anti-theft wrench
Tire Pressure Monitoring System
User’s Manual
Power source (12 to 5V)
6
Product Installation
Airbag Warning
Do not install the device within the operating area of the airbag or
airbag cover.
Our company will not be held liable for any injuries or deaths as a
result of vehicle collisions or vehicle airbag issues.
Receiver Installation
1. Install the car charger.
2. Insert the USB cable into the car charger.
3. Use Velcro to secure the receiver.
4. When the blue light on the receiver
flashes, this indicates that it is properly
receiving signal from the sensor.
Loading...
+ 17 hidden pages