Papago GoSafe 320, GS320 User Manual

Copyright(C)2001-2013, PAPAGO Inc., All right reserved.

User Guide

English 1

1. Production Introduction

1.1 Package Content

Device

2

3

4

5

6

Car Charger

Package should include below items

Removable Buckle

Sticker x 2 pcs Quick Start Guide Warranty Card

1

User Guide

English 2

1.2 Device Interface

1. 2.4”Screen

2. LED Light

3. Buttons

4. Mini USB

5. HDMI

6. Microphone

7. Speaker

8. Bracket Connector

9. Power Switch

10. SD Card Slot

11. Lens

Front View Right View

Top View Bottom View

Left View Rear View

5

4

11

6

7

3

2

1

8

9

10

English 3

2. Install/Uninstall

2.1 Install Location

1. Put the device around the area of front rear view mirror, to have better view.

2. Make sure the lens is within windshield wiper area, to have the clear video quality in
the raining day.

3. Don’t install the device within the area of air safety bag.

4. Don’t install on the tented windshield film, to prevent any damage of the film.

5. Don’t install on the area that will affect by the tinted window film or any interference
electronic products.

Do not put the device within the area of air safety bag. Our company is not responsible for
any damage or injure caused by air safety bag.

Air Safty Bag Warning

Best mounting

location

2

3

English 4

2.2 Install

2.3 Uninstall

1. Plugging the car holder and Push to lock.

2. Stick the removable buckle on proper area.

3. Adjust the angle.

P.S. Do not move the position of the buckle within 24 hours.

1

1

1. Shift device leftward to remove from car holder

English 5

3. Start to Use

3.1 Power On

1. Insert the car charger into the car lighter.

2. Insert the USB cable into the USB port.

3. Insert the SD card into the SD card slot, and switch for Power ON.

3.4 Auto Power ON/OFF

1. Switch to Power ON.

2. Auto Power OFF after car power off.

3. After start up the car again, the device will auto Power ON again and start
cycle recording.

3.3 Power Off

1. Switch to Power OFF.

2. Take off the SD card after completely power off.

3.2 First Start On

Setting the language and time.

P.S. If the car power off but the car lighter still working, then will not
support for this feature.

English 6

3.5 Features of Each Button

Button FeatureIntroduction

Video Saving

Up/Play

Down/Setting

Mode switch/

screen off

On/Off Power ON/OFF

Recording

-Video saving

Play/ Setting

-Back to recording

Recording

- Enter play list

Play/ Setting

-Up

Recording

- Enter setting list

Play/ Setting

- Down

- Long press for taking picture

Recording

-On/Off LCD

- Long press for for On/Off voice

Play/Setting

-Confirm

English 7

3.7 Video screen

1. video time

2. video reserved space

3. EMG recording status

4. voice record off

5. feature list

Recording

Error

3.6 LED Light

Not recording

Recording

Not insert SD card
Out of memory SD card
Not compatible SD card
Over high/low temperature, will auto power off

LED Color Definition

Green

Red

Keep glittering

00:00:36

4/10

PLAY SETTING LED Off

1

2

3

4

5

3.8 Info Stamp

1. Date

2. Time

2012-05-11 08:13:20 PAPAGO!GS320

2

1

English 8

4.2 Voice Recording

1. Push longer for“setting”button, until the upper
right side shows microphone off icon to off the voice recording feature.

2. On the other hand, push longer again for “setting” button, until the
upper right side disappear the microphone off icon to on the voice recording
feature again.

3. Or to set the voice recording on/off from setting menu.

4.3 Screen off

Push longer with mode button during video recording to off the screen.

4. Record/Play

4.1 Cycle Recording

1. Insert SD card, power switch ON to start record.

2. Each recording file is default 5 minutes, and will overwritten while out of
SD card memory.

4.4 10 Sets Video Reserved Space

Push the video copy button during recording for save the current video to
prevent for auto rewritten.

5.1 Clock

Enter setting menu, manually setting date and time.

5.2 Date Stamp

On/Off the Date Stamp.

5.3 Video Resolution

1080P30FPS / 720P60FPS / 720P30FPS.

5.4 Voice Recorder

On/Off voice recorder.

5.5 LCD off

To set screen always on or auto off after 1, 3, 5 minutes.

5.6 LCD Light

On/Off the LCD Light.

English 9

5. System Setting

4.5 Video Play/Delete

1. Push play button to enter play menu.

2. Select play source file(Emergency Record or Last Record)

3. Select video to play/delete.

5.10 Volume

Select volume.

5.11 LCD Brightness

Adjust screen brightness.

5.12 Default

To have all settings reset to default status.

Format Alert,OFF/15days/30days/60days.

5.13 Format

5.14 Format Notification

Adjust screen brightness.

5.15 Version

Software version.

5.7 Warning Beep

On/Off the warning beep.

5.9 Beep

On/Off the beep.

5.8 Language

Support multi-languages

English 10

English 11

7. Caution

7.1 Usage Related

1. If car lighter still on after car power off, make sure to pull off the car charger,
in case to run out all the battery or cause any accident.

2. There will be backup battery to record the files after car power off, device
power off or any emergency power off.

3. Do not take off SD card immediately during the device power off, to prevent
file damage.

6. Photo Taking Feature

Press "Setting" button for 3 second to take pictures, this
image file will save at SD card:\REC\100MEDIA.
System will show this icon when picture is taken successfully,
and will not interrupt video tape.

English 12

3. SD card memory & recording time for reference

8. Reference Info

To use car charger connect directly to car power source.
(this installation method is not covered in the warranty.)

1. To cut car charger cable at the front side, make sure to keep the regulator.

2. To connect red cable to ACC. power, and black cable to negative.

Regulator

7.2 SD Card Related

1. Please use at least Class 6, 8GB SD card

2. Before use, please formatting the SD card

SD card Memory

8GB

16GB

32GB

120min

240min

480min

240min

480min

960min

720p 30fps

1080p 30fps / 720p 60fps