Paoluy Silicone Technology KB6006I User Manual

KB6006I Instruction Manual
1Contents
1.1Bluetooth keyboard 1PCS
1.2IPAD leather protective case 1PCS
1.3Instruction manual 1PCS
1.4USB Charging cable 1PCS
2Product Features
2.1use Broadcom20730 main control chip, have Bluetooth3.0 interface
software
2.3built-in power management software, can be in Microsoft's Windo ws system automatically usable capacity
2.4、Put the magnet between the keyboard and leather case. The keyboard and leather case can be separated use
2.5IPAD 5 keyboard and leather case,exclusive design for IPAD5
2.6Mute design: effectively avoid other person sleeping(especially for one room with several person )
2.7Architecture design, provides comfortab le ha ndling feel
2.8Caps lock signal helps in capital lett ers writing
2.9Support Iphone,Mac,Windows and Android system etc.It’s more convenient for you
3Specifications
3.01executive standard: bluetooth V3.0
3.02maximum operating distance: 10 meters
3.03modulation mode: 2.4 G FHSS
3.04transmit power: Class 2 levels
3.05working voltage: 3.7V
3.06working current: 3.0 mA
3.07standby current: 2.0mA
3.08sleep current: 55uA
3.09charging current: 110mA
3.10standby time: 90days
3.11theoretical use time: 10days
3.12、continuous uninterrupted use time: 40hours
3.13theoretical charging time: 1.0-1.5hours
3.14lithium battery capacity: 120mAh
3.15lithium battery life span: three years
3.16the lithium battery type: 301160P
3.17the key dynamics: 60 + 10g
3.18buttons life: 5 million times
3.19operation temperature: 0-55
3.20storage temperature: - 20-60
4Keyboard and IPAD or Iphone setting
4.1Built in lithium battery with bluetooth and connect with IPAD,mobilephone or PC.
4.1.1Below information will show you how to using,setting and charing.
4.2POWER ON/OFF
4.2.1Turn On the keyboard:Press the button of power about 1.0second.
4.2.2Turn off:turn on the keyboard,then press the Power Button around 1.0 seconds.The instruction light of power will be closed and the light of bluetooth twinkle rapidly 3 times.The keyboard be turned off.
4.3Indicator
4.3.1、The LED indicator on the keyboard show battery,state and charge.If you turn on the keyboard first time,the power indicator constant light and the bluetooth indicator light 5 seconds.The battery is good.After 5 seconds,if
keyboard didn’t match the IPAD,mobilephone and PC,the indicator will twinkle.The keyboa rd i s serachi ng a nd read y to match IPAD,mobilephone and PC etc.(Match means wireless connect with IPAD,mobilephoe and PC,and ready to correspondence.)
4.3.2、If you don’t put the keyboard match the IPAD,mobilphone and PC etc within 10 minutes.The light of power and bluetooth will colsed.The keyboard be turned off.
4.3.3The keyboard and IPAD,mobilephone and PC matched success,the light of bluetooth off,the power constant light.
4.3.4When the keyboard and IPAD,mobilephone and PC match success and can use.If you don’t use the keyboard over 15minutes,the light of power will off,the keyboard sleeping.When you want to use the keyboard
again,you just press any button softly.The power will light again,you can use the keyboard.
4.3.5When you use the keyboard in the process,if the power light,advise you the battary is less than 5%,you need charing.
4.3.6Plug the charger into the charing interface.The charge light.If the battary is full enough,the charge will cut off automatically.
4.3.7When you use the keyboard in the process, you lock the upper and lowercase letters,the Caps light,when you unlocked,the Caps will off.
4.4the keyboard with new IPAD and IPHONE connection:
4.4.1Press the Power button around 1.0 second,the keyboard will be turned on.
4.4.2Click the setting button of IPAD and IPHONE,Then choose the General and blu etooth.The IPAD i s searching bluetooth device.
4.4.3After the IPAD and IPHNE find out the bluetooth device and connect the bluetooth keyboard(see blow
picture),IPAD will advise you input the password.
4.4.4Input the password according to the IPAD advise.Please note there are no advise during the input.Please make sure input correct and press enter button.
4.4.5If IPAD and keyboard connect succes s.the power cons tant light.Power constant light advise you turn off the keyboard while you don’t use it.
4.5keyboard with other IPAD or IPHONE connection
4.5.1After your keyboard connect with 1PCS of IPAD or IPHONE,you can connect with other IPAD or IPHONE .If your keyboard connected with IPAD or IPHONE over 10 meters(33 feet).Please according to item4.4.
4.5.2If your keyboard connected with IPAD or IPHONE within 10 meters(33 feet).You must cut off the current
connect first,then try to connect with other IPAD and Iphone.
4.5.3、Cut off the connection:
4.5.3.1Please touch the setting button on the connected IPAD and IPHONE.Choose the General and
bluetooth.
4.5.3.2Please find out the keyboard you want to remove in the bluetooth,then click(>)button,you will log into
the bluetooth settings .
4.5.3.3Choose Forget this device in the bluetooth settings,then click OK button.
4.5.4If you want to the keyboard match with other IPAD or IPHONE.Please according to item4.4
4.6The keyboard with new PC,MAC or mobilephone Connection.
4.6.1The new PC,MAC or mobilephone setting procedure same as PC,MAC and mobilepho ne.
4.6.2Please according to item4.4 to set the keyboard.
5Charging
When you use the keyboard in the process, the keyboard of POWER (POWER) instructions parade into
rapid flashes state, right now you keyboard's electricity shortage, you should give your keyboard charging, charging steps as follows:
5.1、Please take charge line attached to the USB male seat end insert computer USB interface or USB interface of the IPAD charger, the other side is inserted into the USB charging interface, MINI5PIN keyboard.
5.2、When charging,the indicator will light, when the batteries full,the indicator will cut off automatically. (theory charging time for 1.5 hours)
6Keyboard and iPad hotkeys specifies
Press this button can return home page, click on "IPAD FN" this button again when computer to realize "in
ESC" function
Press this button can control IPAD screen brightness drop, hold "FN" this button again when in computer
to realize "F1" function;
Press this button can control IPAD screen brightness increases, hold "FN" this button again when
computer to realize "in" function; F2
IPAD locked in on this key, IPAD into the screen saver pictures interface, hold "FN" this button again when
computer to realize "in F3" function;
When in use IPAD edit the document by this button to call up an d hidden IPAD virtual keyboard, hold "FN"
this button again when computer to realize "in F4" function;
IPAD in boot state, press this button can enter the IPAD search page, click on "FN" this button again
when computer to realize "in F5" function;
When the IPAD in music broadcast, click this button can control music upgrade a, hold "FN" this button
again when computer to realize "in F6" function;
IPAD in boot state, press this button can control the play/pause music, hold "FN" this button again when
computer to realize "in" function F7;
When the IPAD in music broadcast, click this button can control music downwards a, hold "FN" this
button again when computer to realize "in F8" function;
Press this button can be mute, click again, hold "cancel mute FN" this button again when computer to
realize "in" function; 9 F
Press this button can to reduce the volume, hold "FN" this button again when computer to realize "in"
function F10;
Press this button can increase the volume, hold "FN" this button again when computer to realize "in F1 1"
function
Press this button can lock IPAD screen, hold "FN" this button again when in the computer to realize
"can join" function.
7Storage.
7.1when you have finished using your keyboard or you need to carry the keyboard, please don't forget when the keyboard source switch to OFF place, closed keyboard power, to extend battery life.
7.2when you need long time battery storage for your keyboard, please don't forget to put a battery power charger to a half, about charging 1 hour, then store your keyboard, this can help the lithium-ion batteries live longer
8Troubleshooting
8.1Keyboard and IPAD cannot establish connections
8.1.1please check your IPAD bluetooth device is already open and went in search of state.
8.1.2hold and release the keyboard after Bluetooth keyboard p airing button, a flashing lights state.
8.1.3keyboard and Ipad connected in 10 metres from working range
8.1.4、Ipad bluetooth devices have change, if there is a need to match again.
8.1.5your Ipad bluetooth device is also connected to the other bluetooth terminal and confirm Ipad bluetooth device speed.
8.1.6check your battery, if there is electricity shortage, please charge.
8.2Rechargeable lights not bright when charging:
8.2.1check the charger or if you are using computer USB port have voltage output, recommend replacing
charger or computer USB port
8.2.2check whether the two ends of the charging line connected.
8.2.3batteries have been filled, temporary not need to recharge
8.2.4、sent to the designated thrusters for repair
This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions:
1 This device may not cause harmful interference 2 This device must accept any interference received, including interference that may cause undesired operation.
15.21 Information to user.
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.
Loading...