Paoluy Silicone Technology BKB76D User Manual



BL-BKB76D Bluetooth Keyboard Manual

Content

•Product Content ……………………………………..………………（1）

•Product Features………………………………………………………（1）

•Specifications …………………………..………………………….（1）

•Important Notes ……………………………………………...………（2）

•Keyboard and iPad connection……………………………….………（8）

•Charging……………………………………………………………（11）

•Keyboard and iPad hotkeys specifies………………………………（13）

•Storage………………………………………………………………（14）

•Troubleshooting ……………………………………………………（15）



Contents

1、Bluetooth Keyboard
2、Manual
3、Protective Case
4、Charging Cable

Specifications

1、 Use Broadcom20730 main control chip, have Bluetooth 3.0 interface.
2、 Built-in power management software, can be in Microsoft's Windows system automatically

usable capacity.；
3、 Unique design: effectively avoid noise pollution.
4、 Waterproof ,dustproof, anti-pollution, anti-acid design, waterproof for silicone pary, can wash

it directly by water.
5、 Caps lock signal helps in capital letters writing.
6、 Support business and communications.
7、 Built-in lithium battery design can uses at lest 300 times repeatedly.
8、 More iPad support Angle, can effectively relieve eye fatigue.
9、 Compatible with Windows 2000 and above, MAC, IOS4.0 and Android3.0 above system.

Specifications

1、executive standard: bluetooth : V3.0
2、maximum operating distance: 10 meters

3 、modulation mode: 2.4 G straight sequence fh (FHSS)

4、transmit power: scale-up 2 levels

5、working voltage: 3.7

6、working current: < 3.0 MA

7、standby current: < 1.5 MA

8、sleep current: < 52UA



9、charging current: > 100MA

10、and standby time: 360 days

11、heoretical use time: 37 days

12、continuous uninterrupted use time: 150 hours

13、theoretical charging time: 4-4.5 hours

14、lithium battery capacity: minimum: 450MAH

15、lithium battery life: three years

16、the lithium battery type: 4.5 * 24 * 47MM

17、the key dynamics: 60 ± 10g

18、buttons life: 500 million times

19、operation temperature: -20-60 ℃

20、storage temperature: - 40-70 ℃

Important Notes

1、Before installation the keyboard before its first use when you turn on the POWER switch,
Bluetooth keyboard POWER indicator in 3 seconds later instructed parade at the keyboard is not
bright, paired with any equipment, when LED light after 5 seconds do not connect to the keyboard
detected any device with Bluetooth keyboard POWER indicator into sleep will extinguish
(instructions state). If you use a later, in the second turning the keyboard can connect to
equipment, then POWER indicator light wouldn't extinguished, and Bluetooth on the finish link
device automatically put out.

2、When you use Bluetooth keyboard in the process, if no action, halfway through the keyboard
after 15 minutes keyboard will automatically entered the sleep state, while POWER indicator will
also put out, when you come back will continue to use the keyboard, then you just press any
buttons on a keyboard, wait for about 3 seconds, the keyboard will connected to the device
automatically to Bluetooth connection, the process of the connection will light, complete the
connection automatically extinguished, and stay Bluetooth keyboard again after lights
extinguished, when POWER indicator use long bright.