Paoluy Silicone Technology 20100322 User Manual

2.4G Wireless Silicone Keyboard User’s Guide

Thank you for purchasing our wireless keyboard. Please
read this user manual before operation.
Package Contents

● Wireless Silicone Keyboard.

● A copy of user manual.

Product Specifications

1. Ultra slim and portable design: our Silicone keyboard’s flat design offers an

easy typing surface. .

2. The keyboard features soft touch keys to reduce loud and disruptive typing

noise

3. The silicon wrap is dust and water proof to ensure long life.

4. Our keyboard functions in extreme temperatures (-20°C to 55°C) and

humidity levels (20%-50%).

5. Built-in 2.4 GHz frequency wireless transmission provided to extend

operating distance and reduce interference.

6. Energy-saving design enables efficient use of batteries; estimated over one

year for normal, daily use conditions.

Specification Parameters

● Receiver USB2.0 connection.

● Operating distance up to 10 meters

● Work voltage: 2.2 – 3.3V

● Working current: <5mA

● Standby current :<1mA

● Dormancy current;<100uA

● Dimensions: length 412mm*width 218mm* height 15mm

System Requirements

● Computer operating system requirements:

Works with Windows 98, ME, 2000, XP, Vista.

Operation Guide

Install to Computer:

Step 1. Insert Batteries

(1) Open the Battery Cabinet as below.

Receiver cell Low-voltage matching light,

Figures 1 and 2

Inserts two AAA batteries into battery storage Synch button

(2). Inset two AAA alkaline batteries. (Please refer to the diagram, figure 1 above

for the polarity of batteries). Close the Battery Cabinet cover.

Step 2.

Connecting the Keyboard to the Dongle

Take out the Mini receiver from the cell on the bottom of the keyboard and then
insert it into computer’s USB connector,

(shown in diagram, figure 2).

then synch the receiver by pressing the button