BLUETOOTH
Bluetooth technology connectivity enables wireless
connections between electronic devices. If connected
with a Bluetooth Handsfree device, you can use your
phone more freely . Since dev ices with Bluetooth
connectivity communicate using radio w aves, your
phone and the other device do not need to be in
direct line-of-sight. The two devices only need to be
within 10 meters (30 feet) of each other. The
connection can be subject to interference from
obstructions such as walls or other electronic devices.
This device is compliant with Bluetooth specifica tion
2.0, supporting the following profiles: Headset,
Handsfree, Stereo, Phonebook Access, an d Object
Push for vCard. To ensure interoperability b etween
other devices supporting Bluetooth technology, use
approved enhancements for this model. Check with
the manufacturers of other devices to de termine their
compatibility with this phone. There may be
restrictions on using Bluetooth technology in some
locations. Check with your local autho rities or service
provider. If you want more info rmation on this fun ction,
visit the Bluetooth Technology organization W eb site:
https://www .bluetooth .org/.
Important: Features using Bluetooth technology , or allow ing
such features to run in the background
while using other features, increase the d emand on
battery power and reduce the battery life.
BLUETOOTH ON/OFF
T o toggle Blu etooth® pow er On/Off:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth.
2. Press the Left Soft Key [ ] [T urn On/T urn Off]. A
confirmation window appears.
ADD NEW DEVICE
Pairing is the process that allows the handset to
locate, establish and register a 1-to-1 connection with
the target device.
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth, 1. Add New Device.
2. If the Bluetooth® power is switched off, the
following message will appear on the LCD screen:
“TURN BLUETOOTH POWER ON?” Select Yes and
press the OK Key .
Chapter 4 Menu Function 45
3. The handset will prompt you with the following
message on the LCD screen: “PLACE DEVICE YOU
ARE CONNECTING TO IN DISCOVERABLE
MODE.” Press the OK Key .
4. The device will appear in the ADD NEW DEVICE
menu. Select the device you wish to pair to, then
press the OK Key [PAIR].
5. The handset may prompt you for the passkey.
Consult the Bluetooth® accessory (sold separately)
instructions for the appropriate pa sskey (typically
“0000”—4 zeroes). Enter the passkey, then press the
OK Key.
You do not need to input the passk ey for pair ing when
the passkey of the Bluetooth® Heads et or hands-fr ee kit
is 0000.
6. The handset will prompt you with the following
message on the LCD screen: BEFORE
CONNECTING [Device Name]. If you w ould like to
always confirm before connecting to the Bl uetooth®
device, select Alw ays Ask, then press the OK Key.
Then the handset will prompt you with the message
Connect to [Device Name]? Select Yes and press the
OK Key. If you do not wish to confirm every tim e
before connecting to the Bluetooth® device, select
Always Connect, then press the OK Key.
7. Once connected, you will see the device listed in
46
the Bluetooth menu and the Bluetooth® dev ice
connected icon will appear at the top of the screen
when connected to the Bluetooth® dev ice.
y In the Bluetooth menu, you can disconnect the
connected device with an icon by pressing th e OK
Key [Drop]. Conversely , you can reconnect by
pressing the OK Key again.
y When an audio device is connected, you can select
another device and the connection is au tomatically
transferred from that audio device to the other one.
y If multiple devices are displayed, select the device y ou
want to connect to.
OPTIONS
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth.
2. Select the paired dev ice.
3. Press the Right Soft Key [ ] [Op tions].
4. Select one of the following options, then press the
OK Key.
y Remove Device: Removes a device from the pairing list.
y Rename Device: Renames a paired device.
y Incoming Security: Sets permissions for connecting an
incoming device.
y Service Discovery: To search for the services that the
selected device supports.
y Device Info: Displays device information.
5. Or, press the OK Key to access 1 . Send Name
Card, 2. Get Name Card or 3. Se nd Picture. Selec t
the desired option and press the OK Key to acce ss
the following:
y Send Name Card: Send name cards store d in Contac ts to
a selected device.
1. Press the Directional Key [ ] up or dow n to highlight a
desired contact or contacts, the n press the OK Key
[MARK]. If you want to change y our selections, pre ss the
OK Key [UNMARK] to deselect your selections.
2. Press the Left Soft Key [ ] [Done]. If y ou want to send al l
the name cards, press the Right Soft K ey [ ] [Send All].
y Get Name Card: Get name cards from the selected device.
y Send Picture: Send photos to a selected device.
1. Press the Directional Key [ ] up, down, l eft or rig ht to
highlight a desired photo or photos, th en press the OK Key
[MARK]. If you want to change y our selections, pre ss the
OK Key [UNMARK] to deselect your selections.
2. Press the Left Soft Key [ ] [Done]. If y ou want to send al l
the photos, press the Right Soft Key [ ] [Send All].
SETTINGS
MY PHONE NAME
T o edit the Bluetooth® name of your phone:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth.
2. Press the Right Soft Key [ ] [Op tions].
3. Press 1. My Phone Name.
4. Use the numeric keypad to enter a new custom
name.
5. Press the OK Key [SET] to save and exit.
DISCOVERY MODE
T o set w hether your d evice is able to be searched for
by other Bluetooth® devices in the area:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth.
2. Press the Right Soft Key [ ] [Op tions].
3. Press 2. Discovery Mode.
If Bluetooth power is not on, it will be turned on
automatically.
4. Select On or Off, then pres s the OK Key [SET].
Chapter 4 Menu Function 47
SUPPORTED PROFILES
T o view brief descriptions of th e profiles supported by
the phone:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth.
2. Press the Right Soft Key [ ] [Op tions].
3. Press 3. Supported Profiles.
4. Select one of the following profiles, and then press
the OK Key [VIEW].
Headset / Handsfree / Stereo / Phonebook Access /
Object Push
AUTO P AIR HANDSFR EE
T o set Auto Pair Handsfree O n/Of f:
1. From idle mode, press the OK Key to unlock the
keypad, press the Left Soft Key [ ] [MENU], sw ivel to
the QWERTY keypad and press 9. Settings & Tools,
3. Bluetooth.
2. Press the Right Soft Key [ ] [Op tions].
3. Press 4. Auto Pair Handsfree.
4. Select On or Off, then pres s the OK Key [SET].
48
Loading...