Page 1
PATCHRUNNER/NETRUNNER Rack Top Troughs
Part Numbers:CRTW; WMPV45ERTW
INSTRUCTIONS CM305C
© Panduit Corp. 2007
Installation Instructions (CRTW):
Center rack top trough on the top of a standard 19” EIA rack. Align mounting holes of the trough and Mounting Bracket. Secure with (4)
#12-24 screws.
(4)#12-24 Screws
PATCHRUNNER
Rack Top Trough
Mounting Bracket
For Instructions in Local Languages
www.panduit.com/resources/install_maintain.asp
and Technical Support:
www.panduit.com
Page 1 of 2
Trough slots allow securing of ladder rack directly
to the trough using J-Bolts
If your ladder is positioned above the rack
slots allow anchoring using up to 3/8” threaded
rod
E-mail:
cs@panduit.com
Fax:
(708) 444-6993
Page 2
PATCHRUNNER/NETRUNNER Rack Top Troughs
INSTRUCTIONS CM305C
© Panduit Corp. 2007
Installation Instructions (WMPV45ERTW):
Center rack top trough on the top of a standard 19” EIA rack. Align mounting holes of the trough and Mounting Bracket. Secure with (4)
#12-24 screws.
Tie-Down slots provide access points for ties
used to bundle routed cables together
Front slots must be used when
mounting with WMPV* products.
NETRUNNER
(4)#12-24 Screws
Rack Top Trough
Mounting Bracket
Rear slots must be
used when mounting
with NRV* products
(not shown).
Trough slots allow securing of ladder rack
directly to the trough using J-Bolts
If your ladder is positioned above the rack
slots allow anchoring using up to 3/8”
threaded rod
For Instructions in Local Languages
www.panduit.com/resources/install_maintain.asp
and Technical Support:
www.panduit.com
Page 2 of 2
E-mail:
cs@panduit.com
Fax:
(708) 444-6993
Loading...