Page 1
© Panduit Corp. 2013
INSTALLATION INSTRUCTIONS
RW301
1
2
3
WGTLxx**
(WGTL12** Shown)
Loosely install 2 clips into the slots of
the Tray liner and place onto Pathway.
2X
Front View
2X
Front View
Slide the 2 clips onto the crosswires of the pathway.
2X
Front View
Tighten the screws to a torque of 5 ft/lbs
to ensure effective bonding
#2 Phillips
Screwdriver
Wyr-Grid Tray Liners
For Use With PANDUIT
Wyr-Grid PATHWAY SYSTEMS
Part numbers: WGTL12**, WGTL18**, WGTL24**, & WGTL30**
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2013
INSTALLATION INSTRUCTIONS
RW301
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
1
4
5
Repeat step 1, butting the second Tray Liner
up to the previously installed Tray Liner.
Repeat steps 2 & 3 on second Tray Liner.
2X
Page 2 of 2
Loading...