Page 1
Wyr-Grid Splice with Clip
For use with Panduit Wyr-Grid Pathway Systems
Part Number(s): WGESPL** and WGESPL2430**
© Panduit Corp. 2014
2x 1/4” Lockwasher
INSTALLATION INSTRUCTIONS
Wyr-Grid Splice P/N
WGESPL**
Wyr-Grid Pathway sizes
WG8**10
WG12**10
WG18**10
2x 1/4” Lockwasher
WGESPL**
2x 1/4-20 x 7/8 HHCS
WGESPL2430**
WG24**10
WG30**10
Note: When Pathway Line
2x 1/4-20 x 7/8 HHCS
WGESPL2430**
Wires are cut in the field,
maximum overhang should
not exceed more than .100”.
WGESPL** (Installation of Side splices on all Pathway width sizes)
RW311
1
Clip
2
Note: To bond painted
Pathway, scrape off
paint in area that
touches the clip.
2 Places
2 Places
FR716DR
Torque Specifications:
7lbs·ft (9.49 N·m)
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2014
INSTALLATION INSTRUCTIONS
WGESPL2430** (Installation of Center splices on 24” and 30” Pathway sizes only.)
1
2
RW311
2 Places
2 Places
3
Front View
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...