Page 1
INSTALLATION INSTRUCTIONS
RW300
WGDWx**
Loosely install 3 clips into desired slots of
Slide the 3 clips onto the crosswires of the pathway.
Front View
Tighten the screws to a torque of 5 ft/lbs
1
2
3
3X
3X
3X
© Panduit Corp. 201 3
40009
Wyr-Grid Divider Walls
For Use With PANDUIT
Wyr-Grid PATHWAY SYSTEMS
Part numbers: WGDW2**, WGDW4**, & WGDW6**
(WGDW6** Shown)
the Divider Wall and place onto Pathway.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
to ensure effective bonding.
Page 2
INSTALLATION INSTRUCTIONS
RW300
Assembly Options for Divider Walls
Steps for Applying Divider Walls to Pathway Directional Changes
Spaced for segmented separation
Overlapped for continuous separation.
Prepare Divider Wall for bending by cutting out
Divider Wall installed along a sweeping radius shown
1
2
Cut-out
V notches
Tin Snips
Option 1
Option 2
© Panduit Corp. 2013
1
the V notches at desired locations. Deburr as
needed when cutting Divider Wall sections.
For Instructions in Local Language s
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
techsupport@panduit.com
E-mail:
Phone:
866-405-6654
Loading...