Page 1
Cabinet Top Cable Routing System
Add-on Kit
Part Number(s): STH61"C", STH62"C",STH71"C", STH72"C", SNTH81"C", SNTH82"C"
© Panduit Corp. 2014
INSTALLATION INSTRUCTIONS
V00029FJ
Cabinet Top Cable Routing System Add-on Kit Installation
-Install Cabinet Top Cable Routing System Base on existing Top Cap using [2] M5 Torx screws (use T25 Torx bit) per side.
Note: For 600mm & 700mm installation, remove existing Top Cap screws leaving only [4] corner screws.
-Install [2] Vertical Walls on front and back of Cabinet Top Cable Routing System Base using [9] M5 Torx screws (use T25 Torx bit) per Wall
-Attach Front Fascia to front Vertical Wall by sliding fascia over studs in vertical wall and secure with [4] M5 Torx screws (use T25 Torx bit)
-Attach Rear Fascia to rear Vertical Wall by sliding fascia over studs in vertical wall and secure with [4] M5 Torx screws (use T25 Torx bit)
[10] M5 Torx Screws
to be removed
[2] M5 Torx Screws
(per side)
Cabinet Top
Cable Routing
System Base
600mm & 700mm
[5] M5 Torx Screws
(per side)
screw removal
Existing Top Cap
Vertical Wall
Cabinet Top
Cable Routing
System Base
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2014
[4] M5 Torx Screws
(per side)
INSTALLATION INSTRUCTIONS
V00029FJ
[4] M5 Torx Screws
(per side)
Front Fascia
Rear Fascia
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...