Page 1
PA22165A01
Rev. 08 6-2016
ST2MT
© Panduit Corp. 2016
Page: 1 of 2
ST2M T
T
INLEY PARK, IL
M
ADE IN U.S.A.
TOOL MAINTENANCE
TO INHIBIT CORROSION AND
MAINTAIN PERFORMANCE OF
THE TOOL, KEEP THE METAL
SURFACES COATED WITH A
LIGHT OIL (WD-40®OR
EQUIVALENT).
NOTE: This precision tool has
been engineered and designed
for use with Panduit Pan-Steel
Stainless Steel Ties. It is not
intended for other uses such as
cutting or tensioning other types
of fastening devices.
ST2MT
TINLEY PARK, IL
MADE IN U.S.A.
OPERATING INSTRUCTIONS
1. Loop tie around bundle and
insert tip through head. Pull tie
up snug on bundle by hand.
2. Place tool on tie as shown.
3. Squeeze handles as many
times as necessary to tighten tie
to the desired tension.
4. While maintaining final handle
pressure from Step 3, rotate tool
1/4 to 1/2 turn until excess tail is
cut off. Remove cut-off portion
from tool.
TOOL SHIPPED
FULLY ASSEMBLED
OPERATION INSTRUCTIONS
Page 2
MADE IN USA
STAINLESS STEEL CLAMP
INSTALLATION TOOL
FOR INSTALLING:
Pan-Steel Stainless Steel Ties of
Standard, Light-Heavy, Heavy and
Extra-Heavy cross sections.
Part No. ST2MT
NOT INTENDED FOR MEDICAL USE.
User is responsible to determine suitability
of product for intended use.
REPLACEMENT KIT: (SOLD SEPARATELY)
KT2MG - Gripper Replacement Kit
Page: 2 of 2
www.panduit.com
For Technical Support:
1-800-777-3300
E-mail: techsupport@panduit.com
Loading...