Page 1
Extended Quick Release
SRBPPQBRKT
(2) Brackets
(1) Strain
Relief Bar
1
Note: Brackets are compatible with all Panduit
patch panels except: 3" recessed patch panels,
QuickNet patch panels, all-plastic NetKey patch
panels, and panels with built in support bars.
Attach brackets to terminated panel.
(cables omitted from view for clarity)
2
Attach strain relief bar to brackets.
(cables omitted from view for clarity)
Strain Relief Bar and Brackets
Part Number: SRBPPQBRKT
© Panduit Corp. 2013
INSTALLATION INSTRUCTIONS
PN569
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2013
3
Install panel from the front side of the rack.
Secure to the rack with panel mounting screws
included with the panel.
(cables omitted from view for clarity)
INSTALLATION INSTRUCTIONS
PN569
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...