Page 1
NET-A
CCESS
Cabinets
(Solid Single Hinge Door - S**SSHD and SN**SSHD)
© Panduit Corp. 2014
INSTALLATION INSTRUCTIONS
Door Hinge Bracket Installation
-Align [4] Locating Pins of each Hinge Bracket with matching hole pattern of cabinet frame
-Secure [2] Hinge Brackets to cabinet frame with [1] M6 x 12mm Torx Screw per bracket (use T30 Torx bit)
-Locate Door Catch per table below using (2) M6 x 12mm Torx Screws (use T30 Torx bit). (S-TYPE ONLY)
[4] Locating Pins
V00029CW_01
[2] M6 x12mm Screws
(use T30 Torx bit)
Door Catch Height
42RU 932mm [36.7"]
45RU 1000mm [39.4"]
48RU 1065mm [41.9"]
51RU 1132mm [44.6"]
List of Part Numbers:
600mm Wide Doors:
S62SSHD*
S65SSHD*
S68SSHD*
S61SSHD*
* - Denotes color of door: B-black, G-gray, W-white
[2] Hinge Brackets
[2] M6 x12mm Screws
(use T30 Torx bit)
Door Catch
(S-TYPE ONLY)
700mm Wide Doors:
S72SSHD*
S75SSHD*
S78SSHD*
S71SSHD*
A
800mm Wide Doors:
SN82SSHD*
SN85SSHD*
SN88SSHD*
SN81SSHD*
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
INSTALLATION INSTRUCTIONS
Solid Single Hinge Door Installation
-Open Solid Single Hinge Door to approximately 90º
-Lift door up and insert hinge pins of door onto hinge brackets
-REVERSE STEPS to remove door from cabinet
V00029CW_01
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...