Page 1
NET-A
CCESS
S-Type and N-Type Cabinets
(S7VPPB, SN8VPPB Vertical Patch Panel Brackets
INSTRUCTIONS CM657A
© Panduit Corp. 2013
Install Vertical Patch Panel Bracket - S-Type Cabinets
• Secure Vertical Patch Panel Bracket to Net-Access S-Type cabinet rear equipment rail
with [4] M5 Torx screws (use T25 Torx bit) as shown below.
)
Vertical Patch Panel Bracket
•
S7VPPB - 700mm Wide Server Cabinets
•
SN8VPPB - 800mm Wide Server Cabinets
-or- alternate mounting location for N-Type
switch cabinets
[4] M5 Torx Screws
(use T25 Torx bit)
Vertical Patch Panel
(sold separately)
Front of Cabinet
Vertical Patch
Panel Bracket
(installed)
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
INSTRUCTIONS CM657A
Install Vertical Patch Panel Bracket - N-Type Cabinets
• Secure Vertical Patch Panel Bracket to Net-Access N-Type cabinet front vertical post
with [4] M5 Torx screws (use T25 Torx bit) as shown below.
Vertical Patch Panel Bracket
• SN8VPPB
[4] M5 Torx Screws
(use T25 Torx bit)
Front of Cabinet
Vertical Patch Panel Bracket
(Alternate mounting location - see page 1)
Vertical Patch
Panel Bracket
(installed)
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...