© Panduit Corp. 2010
4-Post Vertical Filler Panels
Part Number: R4PFP
INSTRUCTIONS CM439B
Installation Instructions-Mounting Vertical Filler Panels to
4-Post Rack
Assembly Method:
-Install panels #1, #2, #3, and #4, in order, as oriented, onto frames of 4-post racks.
-Fasten panels together with hardware (as shown on pages 2-4).
Alternate Assembly Method:
Refer to pages 2-4 for rack spacing hardware orientation.
-Assemble top two panels (#1 and #2) together with hardware.
-Assemble bottom two panels (#3 and #4) together with hardware.
-Assemble top and bottom panels together with hardware.
-Install onto frames of 4-post racks.
Panel #1
#12-24 Screws
and #12 Lockwashers
4-Post Racks
(not included)
Panel #3
Panel #2
#12-24 Screws
and #12 Lockwashers
4-Post Racks
(not included)
Panel #4
R4PFP
Contents
(4) Vertical Filler Panels
(8) 1/4-20 Hex Nuts
(8) #12 Lockwashers
(2) Packs of (4) #12-24 Screws
(12) 1/4-20 Screws
(4) 1/4-20 Weld Nuts
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
#12-24 Screws
and #12 Lockwashers
4-Post Racks
(not included)
Page 1 of 4
#12-24 Screws
and #12 Lockwashers
4-Post Racks
(not included)
6”
INSTRUCTIONS CM439B
Installation Instructions-Hardware Mounting Method
1/4-20 Standard Nuts
Fastened to Screws
1/4-20 Screws
Must be through
(2) panels
Inside of panels
1/4-20 Weld Nuts
Fastened to
Screws
1/4-20 Screws
Must be through
(2) panels
Outside of panels
Inside of panels
Outside of panels
Installation Instructions-Orientation of Hardware with 6” Spacing Between Racks
Top View
Top V i e w
Top C enter
View
Center View
Bottom Center
View
Bottom Center View
(2) 1/4-20 Screws and
(2) 1/4-20 Standard
Nuts
Center View
Top Center View
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
Bottom View
Bottom View
(2) 1/4-20 Screws and
(2) 1/4-20 Standard
Nuts
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 4
6.75”
INSTRUCTIONS CM439B
8”
Installation Instructions-Orientation of Hardware with 6.75” Spacing Between Racks
Top View
Top V i e w
Top Center View
Top Center
View
Center View
Bottom Center
View
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
Bottom View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Bottom Center View
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
Center View
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
Bottom View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Installation Instructions-Orientation of Hardware with 8” Spacing Between Racks
Top View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Top C enter
View
Center View
Bottom Center
View
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
Top V i e w
Bottom Center View
Top Center View
(2) 1/4-20 Screws
and (2) 1/4-20
Standard Nuts
Center View
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
Bottom View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Bottom View
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 4
INSTRUCTIONS CM439B
12”
Installation Instructions-Orientation of Hardware with 10” Spacing Between Racks
10”
Top V i e w
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Top View
Top Center View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Top Center
View
Center View
(2) 1/4-20 Screws and
Center View
(1) 1/4-20 Weld Nut
Optional /Additional
Fastening
Bottom Center
View
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
Bottom Center View
Bottom View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
(1) 1/4-20 Screw
and (1) 1/4-20
Bottom View
Standard Nut
Installation Instructions-Orientation of Hardware with 12” Spacing Between Racks
Top V i e w
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
Top View
Top Center View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
For instuctions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
Top Center
View
Center View
Bottom Center
View
(1) 1/4-20 Screw
and (1) 1/4-20
Standard Nut
Bottom View
Optional Fastening
(4) 1/4-20 Screws and
(2) 1/4-20 Weld Nuts
Bottom Center View
www.panduit.com
Page 4 of 4
Center View
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
(2) 1/4-20 Screws and
(1) 1/4-20 Weld Nut
Bottom View
E-mail:
cs@panduit.com
Fax:
(708)444-6448
Loading...