Page 1
Part Number* Devices Tools Color
PSL-DCPLX 10 standard 1 Red
PSL-DCPLX-BL 10 standard 1 Black
PSL-DCPLX-BU 10 standard 1 Blue
PSL-DCPLX-GR 10 standard 1 Green
PSL-DCPLX-IW 10 standard 1
PSL-DCPLX-YL 10 standard 1 Yellow
PSL-DCPLX-OR 10 standard 1 Orange
PSL-DCPLX-IG 10 standard 1
PSL-DCPLRX 10 recessed 1 Red
PSL-DCPLRX-BL 10 recessed 1 Black
PSL-DCPLRX-BU 10 recessed 1 Blue
PSL-DCPLRX-GR 10 recessed 1 Green
PSL-DCPLRX-IW 10 recessed 1
PSL-DCPLRX-YL 10 recessed 1 Yellow
PSL-DCPLRX-OR 10 recessed 1 Orange
PSL-DCPLRX-IG 10 recessed 1
*Available in bulk packages of 100 lock-in devices and fi ve tools. To
order bulk package add -C to the end of the part number
Visit us at www.panduit.com
RJ45 Plug Lock-in Device
Works with most patch
•
cords, faceplates, patch panels,
and VoIP phones
•
me and money
associated with network
and hardware replacement
•
Deters unauthorized users
from moving or stealing
VoIP phones, to aid in E911
availability and compliance
•
Does not interfere with
adjacent jacks or plugs
•
Tool required
and removal, providing
physical security
•
Versions for standard and
recessed jacks*
•
Available in eight colors and
*Standard devices have white cams;
recessed devices have clear cams
cables or PANDUIT ™
cables. It is recommended to test your
Notes:
The RJ45
Plug Lock-in
Device may not
widespread usage.
Page 2
GMDCPL-INS B20241 rev 4
Installing Lock-in Device Onto RJ45 Plug
Step 1:
Align white line on
tool with white line
on device.
Step 2:
Insert tool into
device and rotate
tool clockwise 90°.
Step 3:
Push plug into
into place. Check
that plug is fully
seated in the device.
Step 4:
Rotate tool counterclockwise 90° and
remove tool from device.
Installing RJ45 Plug Into Jack
Insert plug into jack
place. Lightly pull on
the cable to confi rm
that plug is locked
into the jack.
Removing RJ45 Plug From Jack
Step 1:
Align white line on tool
with white line on device.
Step 2:
Insert tool into device and
rotate tool clockwise 180°.
Step 3:
Remove plug from jack.
Step 4:
Rotate tool counter-clockwise 180° and remove tool
from device.
Removing Lock-in Device From RJ45 Plug
Step 1:
Align white line on tool
with white line on device.
Step 2:
Insert tool into device and
rotate tool clockwise 90°.
Step 3:
Use a screwdriver or
fi ngernail to release locking
push plug out of the device.
Step 4:
Rotate tool counter-clockwise 90° and remove tool
from device.
Loading...