Panduit PN10-14R-L Selection Guide

Tooling Selection Guide for

Wire

PANDUIT

Terminal Series

BS

BSH

BSN

BSV

D, DR

D-M

D-MB, DR-B

DNF

DNF-110, DNF-111

DNF-FI

DPF-FI

DNF-FIB, DNF-FIM, DNF-FIMB, DPF-FIB, DPF-FIMB, DNF-LPB, DPF-LPB

DNF-FIB, DPF-FIB

DNF-FIBX

Terminal

Description

Non-insulated butt splices

Heat shrink splices

Nylon insulated butt splices

Vinyl insulated butt splices

Non-insulated sleeved barrel disconnects (includes right angle disconnect)

Non-insulated male blade adapters

Non-insulated male disconnect

Non-insulated right angle female disc. and non-insulated male butted seam disc. Nylon, funnel entry, barrel insulated disconnect (not .110/.111)

Nylon, funnel entry barrel insulated disconnect, .110/.111 tab size

Nylon, fully insulated disconnect

Premium nylon, fully insulated disconnect

Nylon and premium grade nylon, fully insulated, funnel entry, male/female couplers (not .110/.111)

Nylon and premium grade nylon, fully insulated, funnel entry disconnect, 110/.111 tab size

Nylon, expanded wire entry fully insulated

Std.

Wire Range (AWG)

26 – 22 1/4

22 – 18 9/32 XXXX X X X 16 – 14 9/32 XXXX X X X 12 – 10 9/32 XXXX X XX X 22 – 18 5/16 16 – 14 5/16 X 12 – 10 5/16 X 26 – 22 1/4 22 – 18 9/32 X X X X X X X 16 – 14 9/32 XX X XX X X X X 12 – 10 9/32 XX X X X X X X 22 – 18 5/16 16 – 14 5/16 XX X XX X X X X X 12 – 10 5/16 XX X X X X X X 22 – 18 9/32 16 – 14 9/32 XXXX X X X 12 – 10 9/32 XXXX X XX X

22 – 18 9/32 16 – 14 9/32 XXXX X X X 12 – 10 9/32

22 – 18 9/32

16 – 14 9/32 XXXX

22 – 18 9/32

16 – 14 9/32 X X XX X X X X X

22 – 18 7/32

16 – 14 9/32 X X X X

22 – 18 9/32 16 – 14 9/32 XX X X X X X X 12 – 10 3/8 XX X X X X X X 12 – 10 3/8

22 – 18 9/32 16 – 14 9/32 X X X X 12 – 10 3/8 X X

22 – 18 7/32

22 – 18 X-9/32

16 – 14 X-9/32 X

Strip

Length

[+1/32;-0]

ELECTRICAL SOLUTIONS

PANDUIT

Plier Tools

(In.)

CT-100A

XX

X X

XX X X X X X X X

XXXX X X X

X XX X XX X

XXXX

X X X XX

XX X XXX X X X

XX X X X X X X

X X X X

Terminals, Splices, and Disconnects

Controlled Cycle Hand Tools

CT-160

X X X X X X

CT-200

CT-260

CT-300-1

X

CT-310

CT-400

CT-460

CT-1525

CT-1015

CT-1014

CT-1550

X X

CT-1551

CT-1570

CT-1701

Crimp Heads for Pneumatic CT-600-A Tool

CT-500CH

CT-520CH

CT-2500

CT-570CH

CT-550CH

Mechanical

CT-720

A.

System

Overview

B1.

Cable Ties

B2.

Cable

Accessories

B3.

Stainless

Steel Ties

C1.

Wiring

Duct

C2.

Surface

Raceway

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

D3.

Grounding

Connectors

E1.

Labeling

Systems

E2.

Labels

E3. Pre-Printed & Write-On

Markers

E4.

Permanent

Identification

E5.

Lockout/

Tagout

& Safety

Solutions

Tool/product approved combinations indicated on individual product pages.

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

Table continues on page D1.90

F.

Index

D1.89

A.

System

Overview

B1.

Cable Ties

B2.

Cable

Accessories

B3.

Stainless

Steel Ties

C1.

Wiring

Duct

C2.

Surface

Raceway

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

D3.

Grounding

Connectors

E1.

Labeling

Systems

E2.

Labels

E3. Pre-Printed & Write-On

Markers

E4.

Permanent

Identification

E5.

Lockout/

Tagout

& Safety

Solutions

F.

Index

ELECTRICAL SOLUTIONS

Tooling Selection Guide for

Std.

PANDUIT

Terminal Series DNF-M

DNFR-B

DNFR-FIB

DNG-FB

DNG-FL

DNH

DV

DV-B

DV-M

DV-MB

DV-P

DVF

J

JN

P-HDR

P-P

P-R

Tool/product approved combinations indicated on individual product pages.

Terminal

Description

Nylon insulated, funnel entry, barrel insulated, male disconnects Nylon pre-insulated, right angle disconnects

Nylon butted seam, right angle disconnects

S

UPRAGRIP

fully insulated disc., (except DNG14-187FB and DNG14-188FB)

D

ISCO-LOK

fully insulated disconnects Heat shrink disconnects

Vinyl barrel insulated sleeved disconnects

Vinyl insulated, butted seam disconnects

Vinyl barrel insulated male blade adapters

Vinyl insulated male disconnects

Vinyl insulated butted seam male disconnects

Vinyl insulated piggyback disconnects

Vinyl funnel entry barrel insulated female disconnect

Non-insulated wire joints

J214-312 J318-412 J216-410 Nylon insulated

wire joints JN224-318 JN218-216 JN418-212 JN314-412 Non-insulated heavy

duty rings Non-insulated

pin terminals

Non-insulated large ring terminals

™

nylon,

Wire Range (AWG)

22 – 18 9/32

16 – 14 9/32 XX X X X 12 – 10 9/32 XX X X X X

22 – 18 9/32 16 – 14 9/32 X X

22 – 18 11/32 16 – 14 11/32 X

22 – 18 1/4 16 – 14 1/4 X

22 – 18 5/16 16 – 14 5/16 X 12 – 10 5/16 X 12 – 10 9/32

22 – 18 1/4

16 – 14 1/4 X X

22 – 18 9/32 16 – 14 9/32 XX X XX X X 12 – 10 9/32

22 – 18 9/32

16 – 14 9/32 X XX X

22 – 18 1/4

16 – 14 1/4 XX X X X

22 – 18 9/32

16 – 14 9/32 X X

14 – 12 1/2 18 – 12 1/2 16 – 10 3/4

24 – 16 7/16 22 – 16 7/16 18 – 12 1/2 14 – 12 5/8 16 – 12 9/32

22 – 18 9/32 16 – 14 9/32 XXXX X 12 – 10 9/32 XXXX X X

8 3/8 6 7/16 X 4 1/2 X 2 1/2 X

PANDUIT

Wire Strip

Length

(In.)

[+1/32;-0]

Terminals, Splices, and Disconnects (continued)

Plier Tools Controlled Cycle Hand Tools

CT-160

CT-100A

XX X X X

X X

X X X

X X

XX X X X X

X X X

XX X X X

X X X X

X X X X X X X X X X X X X

X XX X X

XXXX X

CT-200

X

CT-260

CT-300-1

X

CT-310

CT-400

CT-460

X

CT-1014

X

CT-1015

CT-1525

X X

CT-1550

CT-1551

CT-1570

X

CT-1701

X

X X

X

X X

X

X X X

X

X X X

CT-2500

Crimp Heads

for Pneumatic

CT-600-A Tool

CT-550CH

CT-500CH

CT-520CH

X X

X

X X X X

X X

X X X X

X

Mechanical

CT-570CH

X

X X X

CT-720

D1.90

Order number of pieces required, in multiples of Standard Package Quantity.

Prime items appear in BOLD.

Tooling Selection Guide for

Std.

PANDUIT

Terminal Series Terminal Description

P-R, P-F, P-LF, P-SLF, P-FF

P-RHT6 High temperature rings

PH Heat shrink terminals

PN-R, PN-RX, PN-F, PN-LF, PN-FF, PNF-R, PNF-F, PNF-LF

PN-HDR, PN-HDRX

PN-SLF, PNF-SLF

PS Non-insulated

PSN Nylon insulated

PK-R KYNAR■rings

PV-HDR, PV-HDRX

PV-LF, PV-LFX

PV-P Vinyl insulated

PV-R, PV-F, PV-FF, PV-RX, PV-FX

PV-R, PV-RX

PV-SLF Vinyl insulated short

■

KYNAR is a registered trademark of Atonfina Chemicals, Inc.

‡Use Die CD-720PV8-2.

Non-insulated rings, forks, locking forks, short locking forks, flanged forks

Nylon and nylon funnel entry forks, locking forks, flanged forks (includes expanded insulation)

Nylon insulated heavy duty and nylon expanded insulated heavy duty rings

Nylon insulated short locking forks

parallel splices

Vinyl insulated heavy duty rings Vinyl insulated locking forks (includes expanded insulation)

pin terminals

Vinyl insulated rings and forks (includes expanded insulation)

Vinyl insulated large ring terminals

locking forks

Wire Range (AWG)

26 – 22 3/16 22 – 18 7/32 XXXX X X X 16 – 14 7/32 XXXX X X X 12 – 10 9/32 XXXX X XX X

22 – 18 9/32 16 – 14 9/32 XXXX X X X 12 – 10 9/32 XXXX X XX X 22 – 18 5/16 16 – 14 5/16 X 12 – 10 5/16 X 26 – 22 3/16 22 – 18 7/32 X X X X X X X 16 – 14 7/32 X XX X X X X X 12 – 10 9/32 X X X X X X

16 – 12 9/32

22 – 18 7/32 16 – 14 7/32 XX X X X X X 12 – 10 9/32 X X X X X 22 – 18 5/16 20 – 16 5/16 X XX 14 – 12 7/16 X XX 22 – 18 5/16 20 – 16 5/16 XX X X X X 14 – 12 7/16 X X X 22 – 18 7/32 16 – 14 7/32 X X X X X X X X 12 – 10 9/32 X X X X X 16 – 12 5/16

22 – 18 5/16 16 – 14 5/16 X XX X X X X X 12 – 10 5/16 X X X X X X X

22 – 18 5/16 16 – 14 5/16 XX X X X X X X 12 – 10 5/16 XX X X X X X 26 – 22 3/16 22 – 18 5/16 XX X X X X X X X 16 – 14 5/16 XX X XX X X X X X 12 – 10 5/16 XX X X X X X

22 – 18 5/16 16 – 14 5/16 XX X X X X 12 – 10 5/16 X X X

PANDUIT

Wire Strip

Length

(In.)

[+1/32;-0]

8 3/8 6 7/16 4 1/2 2 1/2

ELECTRICAL SOLUTIONS

Terminals, Splices, and Disconnects (continued)

Crimp Heads

Plier Tools

CT-200

CT-160

CT-100A

X XX

XXXX X X X

X X X

X XX

X X X X X X X X

XX X X X X X X

X X X

CT-260

Controlled Cycle Hand Tools

CT-1550

CT-400

CT-310

CT-300-1

X

X X X X X X

X X X X X

CT-1014

CT-460

CT-1015

X X X X X

X X X

X X X X X

CT-1525

CT-1551

CT-1570

for Pneumatic CT-600-A Tool

CT-500CH

CT-1701

X X‡

CT-2500

CT-520CH

CT-550CH

Mechanical

CT-570CH

X‡ X‡ X‡

A.

System

Overview

B1.

Cable Ties

B2.

Cable

Accessories

CT-720

B3.

Stainless

Steel Ties

C1.

Wiring

Duct

C2.

Surface

Raceway

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

D3.

Grounding

Connectors

E1.

Labeling

Systems

E2.

Labels

E3. Pre-Printed & Write-On

Markers

E4.

Permanent

Identification

E5.

Lockout/

Tagout

& Safety

Solutions

F.

Index

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

D1.91

A.

System

Overview

B1.

Cable Ties

B2.

Cable

Accessories

B3.

Stainless

Steel Ties

C1.

Wiring

Duct

C2.

Surface

Raceway

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

D3.

Grounding

Connectors

E1.

Labeling

Systems

Tooling Selection Guide for

Tooling CT-1700 CT-720

PANDUIT

Part Number S8-10R-Q S8-14R-Q S8-56R-Q S8-38R-Q S6-10R-E S6-14R-E S6-56R-E S6-38R-E S4-10R-E S4-14R-E S4-56R-E S4-38R-E S2-10R-X S2-14R-X S2-56R-X S2-38R-X S2-12R-X S1/0-14R-X S1/0-56R-X S1/0-38R-X S1/0-12R-X S2/0-14R-X S2/0-56R-X S2/0-38R-X S2/0-76R-X S2/0-12R-X S3/0-14R-5 S3/0-56R-5 S3/0-38R-5 S3/0-76R-5 S3/0-12R-5 S4/0-38R-5 S4/0-76R-5 S4/012R-5 S250-56R-5 S250-38R-5 S250-76R-5 S250-12R-5

ELECTRICAL SOLUTIONS

PANDUIT

P21

(2)

P24

(2)

P29

(2)

P37

(3)

—

Tubular Ring Terminals

CT-930, CT-930CH, CT-920, CT-920CH,

CT-2920, CT-940CH

CD-720-1

P21

(1)

CD-720-1

P24

(1)

CD-720-1

P29

(1)

CD-720-2

P37

(1)

CD-720-2

P42

(1)

CD-720-2

P45

(2)

CD-720-2

P50

(2)

CD-720-3

P54

(2)

CD-720-3

P62

(2)

PANDUIT

Die Part Number

Die Index Number

(Number of Crimps)

CD-920-8

P21

(1)

CD-920-6

P24

(1)

CD-920-4

P28

(1)

CD-920-1

P37

(1)

CD-920-1/0

P42

(1)

CD-920-2/0

P45

(1)

CD-920-3/0

P50

(1)

CD-920-4/0

P54

(1)

CD-920-250

P62

(1)

CT-980, CT-980CH,

CT-2950, CT-2980

—

STD

(1)

STD

(1)

STD

(1)

STD

(1)

STD

(1)

STD

(1)

STD

(1)

CT-2001

CD-2001-8

P21

(1)

CD-2001-6

P24

(1)

CD-2001-4

P29

(1)

CD-2001-1

P37

(1)

CD-2001-1/0

P42

(1)

CD-2001-2/0

P45

(2)

CD-2001-3/0

P50

(2)

CD-2001-4/0

P54

(2)

CD-2001-250

P62

(2)

E2.

Labels

E3. Pre-Printed & Write-On

Markers

E4.

Permanent

Identification

E5.

Lockout/

Tagout

& Safety

Solutions

F.

Index

D1.92

Order number of pieces required, in multiples of Standard Package Quantity.

Prime items appear in BOLD.

Tooling Selection Guide for

Wire

PANDUIT

Ferrule Series Ferrule Description F

FSD, FSF

FTD

FSD-DSL FS-DSL

Non-insulated ferrules

Insulated single wire ferrules (DIN or French color code)

Insulated twin wire ferrules

Insulated single wire ferrules on strips of 50 (DIN or other color code)

Range (AWG)

24 .25

22 – 18 .50 – 1.00 X X X

16 1.50 X X X 14 2.50 X X 12 4.00 X X X 10 6.00 X X X

8 10.0 X X X 6 16.0 X X X

4 – 2 25.0 – 35.0 X X

1 50.0 X 26 – 18 .41 – 1.00 X X X 16 – 14 1.50 – 2.00 12 – 10 4.00 – 6.00 X X X

8 10.0

6 16.0 X X X

4 – 2 25.0 – 35.0 X

1 50.0 X 22 – 18 .50 – 1.00 X X X 16 – 14 1.50 – 2.00 X X X

12 4.00 X X X 10 6.00 X X X

20 – 14 .50 – 2.50 .31" (8mm)

ELECTRICAL SOLUTIONS

PANDUIT

Wire Range

(mm²)

Ferrules

Controlled Cycle Hand Tools

Wire Strip

Length CT-1000 CT-1002 CT-1003 CT-1004 CT-1005 CT-1006 CT-1104 CT-1123

X X

Please

See

Ferrule

Tables –

Pgs.

D1.73 –

D1.77

X

XX X

XX XX

A.

System

Overview

B1.

Cable Ties

B2.

Cable

Accessories

B3.

Stainless

Steel Ties

C1.

Wiring

Duct

C2.

Surface

Raceway

C3.

Abrasion

Protection

C4.

Cable

Management

D1.

Terminals

D2.

Power

Connectors

D3.

Grounding

Connectors

E1.

Labeling

Systems

E2.

Labels

E3. Pre-Printed & Write-On

Markers

E4.

Permanent

Identification

E5.

Lockout/

Tagout

& Safety

Solutions

For technical assistance in the U.S., call 866-405-6654 (outside the U.S., see inside back cover for directory)

F.

Index

D1.93