Page 1
PatchRunner
TM
Enhanced Horizontal Front-Only
Manager
Part Number(s): PEHF2, PEHF3, PEHF4
© Panduit Corp. 2011
PEHF2 PEHF3 PEHF4
TM
PatchRunner
Equipment.
Enhanced Horizontal Front-Only Managers include (1) Manager, (1) Door, and #12-24 Screws for Mounting to Vertical
INSTALLATION INSTRUCTIONS
Prior to Installation
Step 1 (all configurations): Loosen mounting screws on both sides of
part. See Figure 1 for locations.
AND
Step 2 (mounting with PatchRunner
Slide both side mounting brackets as far back as possible. See Figure
2.1.
OR
Step 2 (mounting with PatchRunner
marking on both mounting brackets with center of screws. See Figure
2.2.
OR
Step 2 (mounting with cabinet): Slide mounting brackets as far forward as possible. See Fig. 2.3.
AND
Step 3 (all configurations): Tighten mounting screws on both sides of
part.
TM
Enhanced Vertical Manager):
TM
Vertical Manager): Align
CM508B
Loosen screws
(both sides of part)
Figure 1
Figure 2.1
Figure 2.2 Figure 2.3
Installation with PatchRunnerTM Enhanced Vertical Manager (PEV) on 2 or 4 Post Rack
Attach PatchRunnerTM Enhanced Horizontal
Front-Only Manager to desired location on Vertical Equipment using #12-24 Screws.
#12-24 Screws
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
PEV
Vertical Rack
PatchRunner
Horizontal Front-Only
Manager
TM
Enhanced
Page 2
© Panduit Corp. 2011
INSTALLATION INSTRUCTIONS
Installation with PatchRunnerTM Vertical Manager (PRV) on 2 or 4 Post Rack
Attach PatchRunnerTM Enhanced Horizontal
Front-Only Manager to desired location on Vertical Equipment using #12-24 Screws.
PRV
CM508B
Vertical Rack
Installation with Cabinet
Attach PatchRunnerTM Enhanced Horizontal FrontOnly Manager to desired location on Vertical
Equipment using #12-24 Screws.
Cabinet-Doors and Side
Panels removed for clarity
#12-24 Screws
#12-24 Screws
PatchRunner
TM
Enhanced
Horizontal Front-Only
Manager
Vertical Equipment
Rails
TM
PatchRunner
Enhanced
Horizontal Front-Only
Manager
Door Installation
Install Doors to PatchRunnerTM Enhanced Horizontal Front-Only Manager by aligning the door hinges with knuckles on the fingers and press until door snaps into
place. Door may be opened up or down by pulling on opposite side of door.
Door Opening Down
Door
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
Door Opening Up
E-mail:
cs@panduit.com
Fax:
(708) 444-6448
Loading...