Panduit OFR20OFCR70MT4 Installation Manual

Page 1
OFFICE FURNITURE CORNER RACEWAY AND FITTINGS
FOR USE WITH PANDUIT OFFICE FURNITURE
RACEWAY COMMUNICATION ROUTING SYSTEM
© Panduit Corp. 2014
1 POSITION
INSTALLATION INSTRUCTIONS
2 POSITION
RW183
4 POSITION
OPTIONAL CONFIGURATIONS
1 POSITION WITH OPTION
FOR RACEWAY IN 4 DIRECTIONS
2 POSITION WITH OPTION
FOR RACEWAY IN 4 DIRECTIONS
4 POSITION WITH OPTION
FOR RACEWAY IN 2 DIRECTIONS
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 3
Page 2
© Panduit Corp. 2014
INSTALLATION INSTRUCTIONS
RW183
1
L - 1/8”
L
2
#8 SCREW
3
4
OPTIONAL CABLE ROUTING FROM DESKTOP
1
7/8”
2
2”min
FOR PROPER TAPE ADHESION, SURFACE MUST BE CLEAN AND DRY PRIOR TO INSTALLATION. PRESSURE MUST BE APPLIED FOR 20 SEC. AT POINT OF APPLICATION.
3
CUT OUT NOT TO ALLOW GREATER THAN 1/8” CLEARANCE AROUND CABLE AFTER INSTALLATION
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 3
Page 3
© Panduit Corp. 2014
INSTALLATION INSTRUCTIONS
RW183
BYPASS - 1 POSITION
1
BYPASS - 2 POSITION
2
BYPASS - 4 POSITION
3
4
L-1/8”
L
Note: Minimum bend radius on fittings is .625”.
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Page 3 of 3
Rev. 05
Loading...