Page 1
NetKey
Network Components
Keystone Cabling System
NetKey Keystone Solder Type AV Modules
Part Numbers: NKRSMB**Y, NKRSMR**Y, NK35MSS**
© Panduit Corp. 2017
SOLDER RING
INSTALLATION INSTRUCTIONS
LOCKWASHER
90°
RCA Modules
(NKRSMB**Y, NKRSMR**Y)
NUT
GROUND WIRE
STEP ONE
A. SLIDE SOLDER RING, LOCKWASHER, AND NUT
ONTO SIGNAL WIRE.
B. PULL SIGNAL WIRE THROUGH MODULE.
C. LOOP WIRE THROUGH HOLE IN RCA AND TWIST.
D. SOLDER WIRE TO BACK OF RCA.
STEP TWO
A. ASSEMBLE SOLDER RING, LOCKWASHER, AND
NUT TO RCA-MODULE SUBASSEMBLY.
B. LOOP GROUND WIRE THROUGH SMALL HOLE IN
SOLDER RING AND TWIST.
C. SOLDER GROUND WIRE TO SOLDER RING.
NK397D
SLEEVE
(Ground)
- long pin
RING (R)
- gold pin
Fig. 1
STEP THREE
A. BEND SOLDER RING TAB 90°.
3.5mm(1/8") Stereo Modules
(NK35MSS**)
TIP (L)
A. REFER TO FIG. 1 FOR WIRE PLACEMENT.
B. SOLDER WIRES TO CORRECT TABS ON THE BACK
OF CONNECTOR.
For Instructions in Local Languages
www.panduit.com/resources/install_maintain.asp
and Technical Support:
www.panduit.com
Page 1 of 1
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...