Page 1
NetKey
Network Components
Keystone Cabling System
NetKey All Molded Punchdown Patch Panels
1.5" (38.1mm)
1
CWST
Trim pair separator and/or
filler if present.
2
T568AT568B
4
PDT110
Tool
(T568B shown)
Option 1 (T568B shown) Option 2
T568 BA BA
T568 BA BA
3
Do not untwist
more then 1/8"
from the IDC
tower
24-Port
Front
Back
48-Port
5
T568 BA BA
(T568B shown)
6
T568 BA BA
(T568B shown)
Part Numbers: NK5EPP24P, NK5EPPN24P, NK5EPP48P, NK5EPPN48P,
NK6PP24P, NK6PPN24P, NK6PP48P, NK6PPN48P,
NK6XPP24P, NK6XPPN24P, NK6XPP48P, NK6XPPN48P
© Panduit Corp. 2017
INSTALLATION INSTRUCTIONS
NK548B
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2017
WHITE/ORANGE
4
5
3
6
1
2
7
8
BLUE
T1
R1
T3
R3
T2
R2
T4
R4
WHITE/BLUE
WHITE/GREEN
GREEN
ORANGE
WHITE/BROWN
BROWN
4BLUE
5
1
2
3
6
7
8
T1
R1
T2
R2
T3
R3
T4
R4
WHITE/BLUE
WHITE/GREEN
GREEN
WHITE/ORANGE
ORANGE
WHITE/BROWN
BROWN
COLOR-CODED WIRE POSITIONS
18
Pin outs
Pin
outs
T568A
Pin
outs
T568B
Notes:
1. NetKey All Molded Patch Panels can terminate most 22-26 AWG solid
or stranded wire with a 0.050" (1.27mm) max. o.d., either PVC or
plenum rated.
2. Never install wire into a slot previously used for a larger gauge wire.
3. Never install communications wiring during a lightning storm.
4. Never install communications wiring in wet locations unless the module
is specifically designed for use in wet locations.
5. Never touch uninsulated communications wiring or terminals unless the
communication line has been disconnected at the network interface.
6. Use caution when installing or modifying communication wiring.
7
8
Recommended cable routing for straight panel terminated ports.
Cable Management
1
2
3
4
Jack Module Removal
Jack Module Installation
Depress latch
on module
INSTALLATION INSTRUCTIONS
RECOMMENDED CABLE ROUTING
NK548B
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
techsupport@panduit.com
E-mail:
Phone:
866-405-6654
Loading...